Manual

Dismantling
21 06.01GB
Note:
• If it can still not be pulled out, the procedure
with dropping the bolt might have to be
repeated once or twice until the momentum
releases the firm conical plug-in attachment of
barrel and magazine tube. Once more, make
sure that the thumb and index finger of the left
hand exert a noticeable pull on the barrel.
• If a rifle has several barrels, it is possible that
one barrel sits more tightly in the magazine
tube than another. This does not affect the
precision or functionality of the rifle.
7.5 Removing the bolt
see section 5.7.2
7.6 Remove main stock (optional)
Procedure:
1. Unscrew the main stock screw in the hole of
the main stock 401 anti-clockwise using the
long end of the special spanner supplied
(approx. 5 turns).
2. Remove the main stock by pulling downwards.
Fig. 17
Fig. 18
401