Manual

Trouble-shooting
29 06.01GB
Fault Potential cause Remedy
No round chambered. Magazine not properly inserted,
deformed or dirty.
Gun faulty.
Insert magazine all the way until
it engages
(see section 5.8.2).
Repair by manufacturer.
Bolt cannot be inserted into the
magazine tube.
Bolt lock bolt slide not pressed.
Mainspring is uncocked.
Gun faulty.
Press bolt lock bolt slide
(see section 5.7.3).
Cock the bolt
(see section 5.7.1).
Repair by manufacturer.
Gun trigger cannot be set. Gun is uncocked.
Gun faulty.
Cock the gun
(see section 5.7.1).
Repair by manufacturer.
Gun cannot be locked. Gun is uncocked.
Gun faulty.
Cock the gun
(see section 5.7.1).
Repair by manufacturer.
Gun can be neither unlocked
nor opened.
Gun has trigger set and is
locked.
Gun faulty.
Unset the gun trigger
(see section 5.9.2).
Repair by manufacturer.
Gun trigger is set. When pulling
the trigger tongue no shot fires,
instead the trigger tongue
returns to the start position.
Trigger tongue was pulled to the
side.
Reset, pull trigger tongue back
straight/linear.
Gun disengages automatically
when locking.
Set trigger is set too soft. Immediately adjust the set
trigger harder
(see section 5.9.1).