Manual

Dismantling
2006.01 GB
7.3 Front stock removal
Procedure:
1. Removing the string attachment
(see section 7.1).
2. Insert the special spanner with the long end
through the sling attachment bushing 503.
3. Turn the front stock screw with the special
spanner clockwise until the resistance at the
spanner disappears.
4. Remove the front stock 502 by pulling it to the
front.
7.4 Barrel removal
Procedure:
1. Open and remove the bolt
(see section 5.7.2).
2. Remove the front stock
(see section 7.3).
3. With the spanner supplied undo the clamping
screws 203 but do not remove them.
4. Only fully pull out the clamping screw 203A.
5. Remove the insert 208 by pulling downwards.
6. Pull the barrel 301 off the magazine tube 200,
if necessary, turn to and fro whilst pulling.
CAUTION!
Gun may be damaged
• With a short rifle the front stock must only be
removed by a gunsmith.
Fig. 14
503
502
Fig. 15
CAUTION!
Gun may be damaged
• With a short rifle the barrel must only be
removed by a gunsmith.
203 203A
208