Manual

Dismantling
19 06.01GB
7 Dismantling
7.1 Removing the sling attachment
Procedure:
1. Firmly press in the spring bolt.
2. Turn the sling attachment gently and pull out.
Note:
• Clean and oil the sling attachment regularly.
7.2 Removing the main stock
Procedure:
1. Removing the string attachment
(see section 7.1).
2. Unscrew the main stock screw in the hole of
the main stock 401 anti-clockwise using the
long end of the special spanner supplied
(approx. 5 turns).
3. Remove the main stock by pulling downwards.
WARNING!
Gun is ready to fire
May lead to death or severe injuries
• There must be no magazine in the gun.
• Before stripping your gun, ensure once again
that it is unloaded (see section 5.6).
Fig. 12, rear sling attachment bushing
Fig. 13
714
401