Manual

Handling
15 06.01GB
Resetting
Procedure:
1. Lock the gun (see section 6.2).
2. Aim the gun at a stop-butt.
3. Grip the trigger tongue with the thumb and
index finger and pull back slowly.
Note:
• If the bolt is opended, a reset will be carried
out automatically.
Modifying the trigger weight
Note:
• The trigger weight of the set trigger has been
set to approx. 3 N (300 g) at factory. It can be
modified using the adjustment screw 729.
Adjusting downwards:
– Turn the adjustment screw 729 clockwise.
Adjusting upwards:
– Turn the adjustment screw 729 anti-clockwise.
WARNING!
Uncontrolled discharge of shot
May lead to death or severe injuries
• The trigger weight must not be adjusted to a
value below 3 N (300 g).
• Set the set trigger for rough hunting use
clearly harder than for use in the shooting
range, because the trigger finger often loses
feeling during the cold season.
• If the gun unsets automatically when locked,
the trigger weight has been set too low. It
must immediately be set to a value where the
gun does not automatically unset when
locked.
Fig. 9
706729