Manual

Dealing with problems Optics and accessories
3206.01 GB
12.2 Shipping the gun
Note:
• Familiarise yourself fully with regional
legislation governing the shipping and
transportation of firearms.
1. Check the gun to ensure that it is unloaded
and decocked.
2. Pack the gun well (if possible in its original
packaging) to prevent damage in transit. To
prevent the gun being recognised as such
during shipping, wrap the original packaging in
a second outer layer. Do not include any
accessories in the shipment.
3. Enclose a letter stating the following:
– your full name
– your full address (state street, not P.O. Box)
– your daytime telephone number
– model and serial numbers of the gun
– detailed description of the problem
encountered or the service work to be
performed.
4. Send the gun properly insured and carriage-
paid (packages without correct postage will not
be accepted) to:
– the sales outlet from which you purchased
the gun
– the local Sauer & Sohn dealer,
– the Sauer & Sohn agent (importer) for your
country
– if there is no local appointed Sauer & Sohn
dealer or Sauer & Sohn agent in your
country, to J.P. Sauer & Sohn GmbH.
13 Installation of optics and
accessories
Note:
• When fitting the telescopic sights please
ensure an exact fit between the mounting base
and the system housing. If a maladjustment is
compensated for by firmly tightening the
assembly screws there is a risk that the
system sleeve will be damaged or the
installation comes loose when a load is
applied.
• Please only install mounting bases onto the
system sleeve whose radii match those of the
sleeve exactly.
• It should also be ensured that the mounting
base is not only screwed on but also glued
widely and evenly using a dual component
adhesive.
J. P. & Sohn GmbH recommends the original
SAUER swivel mounting.
CAUTION!
Improper installation of telescopic sights
Gun may be damaged
• A damage of the system sleeve results in a
change of the sleeve shape which can make
changing the barrel difficult or impossible on
the one hand, and can have a negative
impact on the firing precision on the other.
The threads for the assembly screw could
also be damaged or destroyed.
• For rifles assembled differently than
described here, the J.P. & Sohn GmbH will
not accept any warranty of the functionality
and accurate firing.