Manual

Handling
1206.01 GB
5.7.4 Uncock the firing pin
Procedure:
1. Unload the gun and check that there is no
round in the barrel chamber (see section 5.6).
2. Pull the trigger tongue and slowly close the
bolt with the trigger tongue held pulled.
Note:
• The cocking indication must not be visible
(see Fig. 4).
5.8 Magazine
5.8.1 Removing the magazine
Procedure:
1. Hold magazine 600 by hand.
2. If fitted: Push magazine safety towards the
magazine (see section 10.2).
3. Press the stud 207 with the index finger of the
same hand.
4. Remove magazine.
5. Empty magazine.
WARNING!
Uncontrolled discharge of shot
May lead to death or severe injuries
• Only uncock the firing pin with the gun
unloaded and the barrel chamber empty.
CAUTION!
Magazine may fall out
Magazine may be damaged
• When removing the magazine always keep
your hand exactly underneath the magazine.
Fig. 6
207