Manual

Handling
7 06.01GB
5 Handling the gun
5.1 Preparing the gun
Note:
The gun is supplied with a protective and
preserving oil and grease coating, and excessive
protective oil and grease must be removed prior to
first commissioning.
The SAUER 202 Take Down is supplied in a
shock-proof durable plastic case.
For safety reasons the bolt and the magazine
must not be inserted during:
– first commissioning and
– taking possession of the gun.
Procedure:
1. Unload the gun (see section 5.6).
2. Remove the bolt (see section 5.7.2).
3. Check whether ammunition is still in the barrel
chamber or in the magazine.
4. Clean the barrel (see section 11.2).
5. In addition during first commissioning:
– Clean external metal surfaces
(see section 11).
6. If supplied in compact case:
– Mount the barrel
(see section 8.1).
– Fit the front stock
(see section 8.4).
5.2 Ammunition
WARNING!
Undefined condition of the gun
May lead to death or severe injuries
• If the shooter takes possesion of the gun in
any other condition it must be treated as
loaded and unlocked.
WARNING!
Incorrect ammunition
May lead to death or severe injuries and
damage to the gun
• For your gun, use only commercial grade
ammunition in the original packaging, which
corresponds to the calibre of the gun.
• Never use recharged, "reconditioned", hand-
charged or non-standard ammunition in your
gun.
• Never use dirty, wet, corroded, bent,
damaged or oiled ammunition.
• Never spray lubricants, preservatives or
cleaning agents directly onto the rounds.
• Never leave the ammunition lying around
unattended.