sauder.com For things 'n such. Anywhere Console 419230 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. Prefer the phone? Call 1-800-445-1527. PLEASE READ AND KEEP FOR FUTURE REFERENCE. English pg 1-5 Français pg 6-7 Español pg 8-9 Share your journey! Lot #: 373215 Date Purchased: __________________ 06/08/15 Be sure to give us a ring before making any returns.
Table of Contents Assembly Tools Required Part Identification 3 Hardware Identification 3 Assembly Steps 4-5 Français 6-7 Español 8-9 Safety 10 Warranty 11 Page 2 No. 2 Phillips Screwdriver Tip Shown Actual Size Skip the power trip. This time. www.sauder.
Now you know our ABCs. Part Identification å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts. A RIGHT END (1) D BOTTOM (1) G BACK BRACE (2) B LEFT END (1) E SHELF (1) H BLOCK (1) C TOP (1) F BRACE (2) C E F G G B A D F H Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit.
Look for this icon. It means a video assembly tip is available at www.sauder.com/services/tips Step 1 å å Do not completely tighten screws until you have completed assembly. å å å Fasten the ENDS (A and B) to the BRACES (F). Use eight 1/2" MACHINE SCREWS (1). Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. Fasten the TOP (C) to the ENDS (A and B). Use six 9/16" LARGE HEAD SCREWS (2).
Step 2 å å å å å å å Fasten the BOTTOM (D) and SHELF (E) to the ENDS (A and B) and BRACES (F). Use ten 1-1/4" FLAT HEAD SCREWS (3). Fasten the BLOCK (H) to the BOTTOM (D). Use four 2-9/16" MACHINE SCREWS (4) and four WASHERS (5). Fasten the BACK BRACES (G) to the ENDS (A and B). Use four 1/2" MACHINE SCREWS (1). Completely tighten all of the SCREWS. Carefully stand your unit upright. NOTE: Please read the back pages of the instruction booklet for important safety information. This completes assembly.
419230 Utilisez les instructions d’assemblage en français avec les schémas étape par étape du manuel d’instruction en anglais. Chaque étape en français correspond à la même étape en anglais. La pièce devant être attachée à l’élément est représentée en gris sur les schémas de chaque étape pour plus de précision. Comparer la “Liste de pièces” ci-dessous avec la “PART IDENTIFICATION” du manuel en anglais pour vous familiariser avec les pièces avant l’assemblage.
ÉTAPE 1 ÉTAPE 2 Ne serrez pas les vis avant d’avoir terminé l’assemblage. Fixer le DESSOUS (D) et la TABLETTE (E) aux EXTRÉMITÉS (A et B) et ENTRETOISES (F). Utiliser dix VIS TÊTE PLATE 32 mm (3). Assembler l'élément sur un sol à moquette ou sur le carton vide pour éviter d'endommager l'élément ou le sol. Fixer les EXTRÉMITÉS (A et B) aux ENTRETOISES (F). Utiliser huit VIS TÊTE PLATE 13 mm (1). Fixer le DESSUS (C) aux EXTRÉMITÉS (A et B). Utiliser six VIS TÊTE PLATE 14 mm (2).
419230 Use estas instrucciones de ensamblaje en español junto con las figuras paso-a-paso provistas en el folleto inglés. Cada paso en español corresponde al mismo paso en inglés. Se destacan las figuras de cada paso con una tonalidad oscura para mostrar precisamente cual parte se debe montar a la unidad. Compare la “Lista de Part” abajo con la “Part Identification” en el folleto en inglés para familiarizarse con Las partes de ensamblaje.
PASO 1 PASO 2 No apriete firmemente apriete los tornillos hasta que el montaje esté completo. Fije el FONDO (D) y el ESTANTE (E) a los EXTREMOS (A y B) y a las RIOSTRAS (F). Utilice diez TORNILLOS DE CABEZA PERDIDA de 32 mm (3). Ensamble la unidad sobre un piso alfombrado o sobre el cartón vacío para evitar rayar la unidad o el piso. Fije los EXTREMOS (A y B) a las RIOSTRAS (F). Utilice ocho TORNILLOS DE CABEZA PERDIDA de 13 mm (1). Fije el PANEL SUPERIOR (C) a los EXTREMOS (A y B).
WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded shelves. • Risk of injury. • Top-heavy furniture can tip over. • Overloaded shelves can break. • Never exceed the weight limits shown in the instructions. • Work from bottom to top when loading shelves. Place the heavier items on the lower shelves.
1-YEAR LIMITED WARRANTY 1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a period of one year from the date of purchase against defects in materials or workmanship of Sauder furniture components. As used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 2.
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the purchase and assembly process was a positive experience and you feel good about the furniture you just built. If you need assistance or want to learn more, please contact our award-winning, Ohio-based customer service team at 1-800-445-1527 or Sauder.com. Set a world record for speed? Feeling good about yourself? Nice. Get social with it on any of these quality share sites.