sauder.com The stories of your life. 5-Shelf Bookcase 419228 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. Prefer the phone? Call 1-800-445-1527. PLEASE READ AND KEEP FOR FUTURE REFERENCE. English pg 1-10 Français pg 11-13 Español pg 14-16 Share your journey! Lot #: 373213 Date Purchased: __________________ 06/08/15 Be sure to give us a ring before making any returns.
Table of Contents Part Identification Hardware Identification Assembly Steps Assembly Tools Required 3 No. 2 Phillips Screwdriver Tip Shown Actual Size 4 5-10 Hammer Français 11-13 Español 14-16 Safety 17-18 Warranty Page 2 Not actual size Skip the power trip. This time. 19 www.sauder.
Now you know our ABCs. Part Identification å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts. A RIGHT END (1) C TOP (1) E SHELF SUPPORT (4) B LEFT END (1) D SHELF (4) F BACK SUPPORT (2) C D E A B D E F F D E D E 419228 www.sauder.
Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit. 1 SAFETY DRYWALL ANCHOR - 1 2 SAFETY STRAP - 1 Locate this SAFETY STRAP (2) to be used later in assembly. Do not accidentally throw away. 3 1-1/4" FLAT HEAD SCREW - 20 4 1" PAN HEAD SCREW - 1 5 1/2" PAN HEAD SCREW - 1 6 1/2" MACHINE SCREW - 20 7 9/16" LARGE HEAD SCREW - 6 Page 4 www.sauder.
Look for this icon. It means a video assembly tip is available at www.sauder.com/services/tips Step 1 å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. å Fasten the ENDS (A and B) to the SHELF SUPPORTS (E). Use sixteen 1/2" MACHINE SCREWS (6). 6 1/2" MACHINE SCREW (16 used in this step) These holes must be here. B E A 6 E 6 6 E E These holes must be here. 6 These holes must be here. 419228 www.sauder.
Step 2 å Fasten the SHELVES (D) to the SHELF SUPPORTS (E) and ENDS (A and B). Use twenty 1-1/4" FLAT HEAD SCREWS (3). B D A ce 3 rfa oles u S hh wit 3 3 E D e ac les 3 f r Su h ho wit 3 3 E D 3 ce rfa oles u S hh wit 3 E ce rfa oles u S hh wit D E 3 3 1-1/4" FLAT HEAD SCREW (20 used in this step) Page 6 www.sauder.
Step 3 å Fasten the BACK SUPPORTS (F) to the ENDS (A and B). Use four 1/2" MACHINE SCREWS (6). 6 1/2" MACHINE SCREW (4 used in this step) B F A F 419228 www.sauder.
Step 4 å Fasten the TOP (C) to the ENDS (A and B). Use six 9/16" LARGE HEAD SCREWS (7). 7 Edge without molding 9/16" LARGE HEAD SCREW (6 used in this step) C B 7 A For support, place packing foam and magazines here under both ENDS to lift your unit so the TOP is easier to attach. Page 8 www.sauder.
Step 5 å å We recommend using the SAFETY STRAP (2) for added stability. Fasten the SAFETY STRAP (2) to the TOP (C). Tighten a 1/2" SCREW (5) using your Phillips Screwdriver. 2 C 5 1/2" PAN HEAD SCREW (1 used in this step) 419228 www.sauder.
Step 6 å å Position your unit in its final location against a wall. å Fasten the SAFETY STRAP (2) to the wall using a 1" PAN HEAD SCREW (4) and SAFETY DRYWALL ANCHOR (1). å NOTE: Do not turn the SAFETY DRYWALL ANCHOR (1) into a wall stud. If you prefer to fasten the SAFETY STRAP (2) to a wall stud, go to your local hardware store for proper hardware. å NOTE: Please read the back pages of the instruction booklet for important safety information. å This completes assembly.
419228 Utilisez les instructions d’assemblage en français avec les schémas étape par étape du manuel d’instruction en anglais. Chaque étape en français correspond à la même étape en anglais. La pièce devant être attachée à l’élément est représentée en gris sur les schémas de chaque étape pour plus de précision. Comparer la “Liste de pièces” ci-dessous avec la “PART IDENTIFICATION” du manuel en anglais pour vous familiariser avec les pièces avant l’assemblage.
ÉTAPE 1 ÉTAPE 2 Assembler l'élément sur un sol à moquette ou sur le carton vide pour éviter d'endommager l'élément ou le sol. Fixer les TABLETTES (D) aux SUPPORTS DE TABLETTE (E) et aux EXTRÉMITÉS (A et B). Utiliser vingt VIS TÊTE PLATE 32 mm (3). Fixer les EXTRÉMITÉS (A et B) aux SUPPORTS DE TABLETTE (E). Utiliser seize VIS À MÉTAUX 13 mm (6). ÉTAPE 3 Fixer les SUPPORTS D'ARRIÈRE (F) aux EXTRÉMITÉS (A et B). Utiliser quatre VIS À MÉTAUX 13 mm (6). Page 12 www.sauder.
ÉTAPE 4 ÉTAPE 6 Fixer le DESSUS (C) aux EXTRÉMITÉS (A et B). Utiliser six VIS TÊTE LARGE 14 mm (7). Placer l’unité à sa place finale, contre un mur. ÉTAPE 5 Fixer la SANGLE DE SÉCURITÉ (2) au mur à l'aide d'une VIS TÊTE GOUTTE DE SUIF 25 mm (4) et le DISPOSITIF D’ANCRAGE MURAL (1). Il est recommandé d'utiliser la SANGLE DE SÉCURITÉ (2) pour renforcer la stabilité. Fixer la SANGLE DE SÉCURITÉ (2) au DESSUS (C). Serrer une VIS 13 mm (5) à l’aide d’un tournevis cruciforme.
419228 Use estas instrucciones de ensamblaje en español junto con las figuras paso-a-paso provistas en el folleto inglés. Cada paso en español corresponde al mismo paso en inglés. Se destacan las figuras de cada paso con una tonalidad oscura para mostrar precisamente cual parte se debe montar a la unidad. Compare la “Lista de Part” abajo con la “Part Identification” en el folleto en inglés para familiarizarse con Las partes de ensamblaje.
PASO 1 PASO 2 Ensamble la unidad sobre un piso alfombrado o sobre el cartón vacío para evitar rayar la unidad o el piso. Fije los ESTANTES (D) a los SOPORTES DE ESTANTE (E) y a los EXTREMOS (A y B). Utilice veinte TORNILLOS DE CABEZA PERDIDA de 32 mm (3). Fije los EXTREMOS (A y B) a los SOPORTES DE ESTANTE (E). Utilice dieciséis TORNILLOS PARA METAL de 13 mm (6). PASO 3 Fije los SOPORTES DE DORSO (F) a los EXTREMOS (A y B). Utilice cuatro TORNILLOS PARA METAL de 13 mm (6). 419228 www.sauder.
PASO 4 PASO 6 Fije el PANEL SUPERIOR (C) a los EXTREMOS (A y B). Utilice seis TORNILLOS DE CABEZA GRANDE de 14 mm (7). Coloque su unidad en su posición final contra una pared. PASO 5 Fije la CORREA DE SEGURIDAD (2) a la pared utilizando un TORNILLO DE CABEZA REDONDA de 25 mm (4) y el ANCLAJE DE SEGURIDAD PARA EL DRYWALL (1). Se recomienda que utilice la CORREA DE SEGURIDAD (2) para aumentar la estabilidad. Fije la CORREA DE SEGURIDAD (2) al PANEL SUPERIOR (C).
WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded shelves. • Improper loading can cause the product to be top-heavy. • Risk of injury. • Top-heavy furniture can tip over. • Overloaded shelves can break. • Never exceed the weight limits shown in the instructions.
ADVERTENCIA Por favor use el mobiliario correcta y seguramente. El mal uso puede causar riesgos de seguridad o daño a las unidades o artículos domésticos. Cuidadosamente lea la tabla a continuación. Esté alerto de: Puede ocurrir: Evitar el problema: • Estantes sobrecargados. • Cargar el producto inadecuadamente puede causar la inestabilidad. • Riesgo de lesiones. • El mobiliario inestable puede volcarse. • Estantes sobrecargados pueden romper.
1-YEAR LIMITED WARRANTY 1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a period of one year from the date of purchase against defects in materials or workmanship of Sauder furniture components. As used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 2.
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the purchase and assembly process was a positive experience and you feel good about the furniture you just built. If you need assistance or want to learn more, please contact our award-winning, Ohio-based customer service team at 1-800-445-1527 or Sauder.com. Set a world record for speed? Feeling good about yourself? Nice. Get social with it on any of these quality share sites.
