Instructions / Assembly

å
Carefully stand your unit upriht.
å
We recommend usin the SAFETY BRACKET (1G)
for added stability. Use a BLACK 9/16” LARGE HEAD
SCREW (1S) into the top of the unit and a BLACK 1-7/8"
FLAT HEAD SCREW (2S) into a stud in your wall.
å
To insert the drawers into your unit, tip the front of the
drawers down and drop the rollers on the drawers behind
the rollers on the unit. Lift the front of the drawers up and
slide them into the unit.
å
Apply the WARNING LABEL (5L) to the upper DRAWER
BOTTOM (D704). You should be able to read the label
when the drawer is open. When the drawer is closed, it will
hide the label. Peel o the backin and apply the label as
shown in the diaram.
å
NOTE: This is a permanent label intended to last
for the life of the product. Once applied, do
not try to remove it.
Step 14
416532www.sauder.com/services
Pae 17
1G
1S
BLACK 9/16" LARGE HEAD SCREW
(1 used into the top of your unit)
BLACK 1-7/8" FLAT HEAD SCREW
(1 used into a stud in your wall)
2S
5L
Serious or fatal crushin injuries can
occur from furniture tip-over. To help
prevent tip-over:
-Place heaviest items in the lowest drawers.
-Unless specifi cally desined to accommodate,
do not set TVs or other heavy objects on top of
this product.
-Never allow children to climb or han on
drawers, doors, or shelves.
-Never open more than one drawer at a time.
-If equipped with a drawer interlock system, do not
defeat or remove it.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
WARNING
D704
Pro Tip: Lift with your
les. And, you know,
your arms.
40 lbs.
30 lbs.
30 lbs.
30 lbs.
30 lbs.