Instructions / Assembly

Step 11
416532 www.sauder.com/servicesPae 14
å
Insert the DRAWER SIDES (D22 and D23)
at an angle into the slot at each end of the
DRAWER FRONT (F).
å
Slide the DRAWER BOTTOM (D704) into the
grooves in the DRAWER SIDES (D22 and D23) and
DRAWER FRONT (F).
å
Fasten the DRAWER BRACE (J) to the DRAWER
FRONT (F). Tighten one HIDDEN CAM.
å
Fasten the DRAWER BACK (D80) to the DRAWER
SIDES (D22 and D23) and DRAWER BRACE (J). Use five
BLACK 1-9/16" FLAT HEAD SCREWS. (30S). Repeat this
step for the other drawers.
The tabs should insert freely into the
slots. Gently tilt the DRAWER SIDES side
to side until the tabs slip into the slots.
Surface with
HIDDEN CAM
12
34
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT roove.
With the palm of your hand, tap the
DRAWER BOTTOM down into the roove.
Groove
Arrow
Maximum
210 derees
Minimum
190 derees
Start each screw a few turns before
completely tihtenin any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(20 used in this step)
30S
F
F
J
F
J
VIEW THE T-LOCK BOX VIDEO
D23
D22
D23
D704
D22
D22
D23
D80
Unfi nished
surface