Instructions / Assembly

Step 4
416082 www.sauder.com/servicesPage 8
A
B
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
å
First, fi ll the holes in the LEGS (I and J) 1/4 to 1/2 full with
GLUE (54M). Then, insert the WOOD DOWELS (15F) into
the holes. Wipe away the excess GLUE.
å
Now, fi ll the holes in the ENDS (A and B) 1/4 to 1/2 full
with GLUE.
å
Fasten the LEGS (I and J) to the ENDS (A and B). Tighten
ten HIDDEN CAMS.
å
NOTE: Be sure the WOOD DOWELS in the LEGS insert into
the holes in the ENDS. Wipe away the excess GLUE.
1
2
I
These surfaces
should be even.
These surfaces
should be even.
Edge with
TWIST-LOCK®
FASTENERS
Edge with
TWIST-LOCK®
FASTENERS
Edge with three CAM SCREWS
Fill the holes 1/4 to 1/2 full with GLUE.
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely di cult.
Caution
!
54M
15F
15F
J