Instructions / Assembly

Step 9
416082www.sauder.com/services
Page 13
L
E2
N
N
å
Fasten two METAL BRACKETS (4G) to the BACK SKIRT (N). Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
å
NOTE: Be sure the BRACKETS are even with the edges of the BACK SKIRT.
å
Fill the holes in the BACK SKIRT (N) 1/4 to 1/2 full with GLUE (54M). Then, insert two WOOD DOWELS (15F) into the
holes. Wipe away the excess GLUE.
å
Now, fi ll the hole in the LEFT REAR LEG (L) 1/4 to 1/2 full with GLUE. Then, insert the WOOD DOWEL in the BACK SKIRT
into this hole. Wipe away the excess GLUE.
å
NOTE: Be sure the CAM SCREWS in the LEG insert into the holes in the BACK SKIRT. You will not tighten these HIDDEN
CAMS at this time.
å
Fasten the BACK SKIRT (N) to the BOTTOM (E2). Use two BLACK 9/16" LARGE HEAD SCREWS (1S) through the METAL
BRACKETS on the BACK SKIRT and into the BOTTOM.
BLACK 9/16" LARGE HEAD SCREW
(4 used for the METAL BRACKETS)
1S
4G
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely di cult.
Caution
!
54M
B
15F
Surface with
METAL BRACKETS
Edge without
METAL BRACKETS
Surface without
HIDDEN CAMS