Instructions / Assembly

Step 13
415520 www.sauder.com/servicesPae 18
å
Insert the LARGE DRAWER SIDES (D30 and D31)
at an angle into the slot at each end of the RIGHT
BOTTOM DRAWER FRONT (M).
å
Slide the DRAWER BOTTOM (D733) into the grooves in
the LARGE DRAWER SIDES (D30 and D31) and RIGHT
BOTTOM DRAWER FRONT (M).
å
Fasten the DRAWER BRACE (M67) to the
RIGHT BOTTOM DRAWER FRONT (M). Tighten
one HIDDEN CAM.
å
Fasten the LARGE DRAWER BACK (D68) to the LARGE
DRAWER SIDES (D30 and D31) and DRAWER BRACE (M67).
Use five BLACK 1-9/16" FLAT HEAD SCREWS (30S). Repeat
this step for the other DRAWERS.
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
Surface with
HIDDEN CAM
12
34
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT roove.
With the palm of your hand,
tap the DRAWER BOTTOM
down into the roove.
Groove
Arrow
Maximum
210 derees
Minimum
190 derees
M
VIEW THE T-LOCK BOX VIDEO
M
M
D31
D733
D68
D30
D30
D31
D31
D30
Unfi nished
surface
M67
M67
Start each screw a few turns before
completely tihtenin any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(30 used in this step)
30S