sauder.com You won't just fall in love with it. You'll fall asleep in it. Twin Platform Bed Beginnings Collection | 415465 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. Prefer the phone? Call 1-800-523-3987. Share your journey! PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Table of Contents Part Identification Assembly Tools Required 2-3 Hardware Identification No. 2 Phillips Screwdriver Tip Shown Actual Size 4 Assembly Steps 5-18 Hammer Français 19-20 Español 21-22 Warranty Not actual size Skip the power trip. This time. 23 Now you know our ABCs. Part Identification å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other.
Part Identification D2 K2 A2 L J2 C D2 K2 K2 F J2 L D2 C K2 D2 L J2 F K2 C D2 J2 K2 L B2 D2 D17 D219 D987 G G D16 E2 D17 D219 G E2 www.sauder.
Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit. 1F HIDDEN CAM - 4 10I WASHER - 16 1S CAM SCREW - 4 45K PULL - 4 4G METAL BRACKET - 2 11M SWIVEL ROLLER - 8 10S SILVER 1-1/8" FLAT HEAD SCREW - 80 BLACK 9/16" LARGE HEAD SCREW - 4 14S BROWN 1-1/2" FLAT HEAD SCREW - 8 24S SILVER 7/8" MACHINE SCREW - 8 25S BLACK 9/16" PAN HEAD SCREW - 16 30S BLACK 1-9/16" FLAT HEAD SCREW - 12 113S Page 4 8F BLACK 1-15/16" FLAT HEAD SCREW - 16 415465 www.
Look for this icon. It means a video assembly tip is available at www.sauder.com/services/tips Step 1 å å å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. Scan this QR code or go to this address: http://qr.sauder.com/?ID=1145 to watch a video on how to assemble your unit. Push four HIDDEN CAMS (1F) into the DRAWER BRACES (G). Turn four CAM SCREWS (8F) into the DRAWER FRONTS (E2).
Step 2 å Fasten the RAILS (J2) to the LEGS (D2). Use twenty-four SILVER 1-1/8" FLAT HEAD SCREWS (10S) through the larger holes in the RAILS (J2). Remember: Righty tighty. Lefty loosey.
Step 3 å Fasten the SMALL SUPPORTS (L) to the RAILS (J2). Use sixteen SILVER 1-1/8" FLAT HEAD SCREWS (10S). This hole must be here. 10S SILVER 1-1/8" FLAT HEAD SCREW (16 used in this step) L L This hole must be here. J2 L J2 J2 This hole must be here. L J2 This hole must be here. www.sauder.
Step 4 å Fasten the SUPPORTS (K2) to the HEADBOARD (A2) and FOOTBOARD (B2). Use sixteen SILVER 1-1/8" FLAT HEAD SCREWS (10S). 10S SILVER 1-1/8" FLAT HEAD SCREW (16 used in this step) Edge with holes Edge with holes B2 K2 U su nfin rfa ish ce ed U n fin is h ed su rf ac e K2 Long finished edge A2 Page 8 415465 www.sauder.
Step 5 å Fasten the SUPPORTS (K2) to the LARGE SUPPORTS (F). Use eight SILVER 1-1/8" FLAT HEAD SCREWS (10S). 10S SILVER 1-1/8" FLAT HEAD SCREW (8 used in this step) K2 Edge with holes F K2 Edge with holes F www.sauder.
Step 6 å Fasten the remaining two SUPPORTS (K2) to the SUPPORTS (K2). Use eight BLACK 1-15/16" FLAT HEAD SCREWS (113S). Don't worry. It isn't Rome. This can be built in a day. Edge with holes K2 F K2 F Edge with holes K2 K2 113S BLACK 1-15/16" FLAT HEAD SCREW (8 used in this step) Page 10 415465 www.sauder.
Step 7 å Fasten the RAILS (J2) to the SUPPORTS (K2). Use sixteen SILVER 1-1/8" FLAT HEAD SCREWS (10S). 10S Unfi ce urfa s ed nish SILVER 1-1/8" FLAT HEAD SCREW (16 used in this step) J2 Unfi e J2 c a f ur ds e h s ni K2 F J2 ce urfa s d ishe Fin K2 F J2 The LARGE SUPPORTS (F) must be on the floor. www.sauder.
Step 8 å å å å Fasten two METAL BRACKETS (4G) to the FOOTBOARD (B2). Use two BLACK 9/16" LARGE HEAD SCREWS (1S). NOTE: Be sure the edges of the METAL BRACKETS are even with the edges of the FOOTBOARD. Fasten the FOOTBOARD (B2) to the RAILS (J2). Use four BLACK 1-15/16" FLAT HEAD SCREWS (113S). Fasten the FOOTBOARD (B2) to the LEGS (D2). Use two BLACK 9/16" LARGE HEAD SCREWS (1S) through the METAL BRACKETS on the FOOTBOARD and into the LEGS.
Step 9 å Fasten the HEADBOARD (A2) to the RAILS (J2). Use four BLACK 1-15/16" FLAT HEAD SCREWS (113S). å Fasten the outer PLATFORMS (C) to the SUPPORTS (K2). Use eight BROWN 1-1/2" FLAT HEAD SCREWS (14S). 14S BROWN 1-1/2" FLAT HEAD SCREW (8 used for the PLATFORMS) C C r fo ed . ed M ne OR ws F re AT sc r PL No nte ce Long finished edge J2 C K2 K2 A2 J2 113S BLACK 1-15/16" FLAT HEAD SCREW (4 used for the HEADBOARD) www.sauder.
Step 10 å Fasten eight SWIVEL ROLLERS (11M) to the DRAWER BRACES (G). Use sixteen WASHERS (10I) and sixteen BLACK 9/16" PAN HEAD SCREWS (25S). å NOTE: Be sure the flat part of the SWIVEL ROLLER is down toward the DRAWER BRACES. Be sure the flat part of the SWIVEL ROLLER is down toward the DRAWER BRACES. 25S BLACK 9/16" PAN HEAD SCREW (16 used in this step) 11M (8 used) 10I G (16 used) G G G Page 14 415465 www.sauder.
Step 11 VIEW THE T-LOCK BOX VIDEO 1 The tabs should insert freely into the slots. Gently tilt the DRAWER SIDES side to side until the tabs slip into the slots. 2 With the palm of your hand, tap the DRAWER BOTTOM down into the groove. Un fi su nish rfa ed ce D16 D987 D16 E2 D17 E2 D17 Be sure the DRAWER BOTTOM inserts into the DRAWER FRONT groove. Groove å Insert the DRAWER SIDES (D16 and D17) at an angle into the slot at each end of the DRAWER FRONT (E2).
Step 12 å Fasten two PULLS (45K) to the DRAWER FRONT (E2). Use four SILVER 7/8" MACHINE SCREWS (24S). å Repeat this step for the other drawer. 24S SILVER 7/8" MACHINE SCREW (8 used in this step) 45K E2 45K Page 16 415465 www.sauder.
Step 13 å NOTE: You have the option to position the drawers on the right or left side of your unit. DRAWERS ON LEFT SIDE OF BED He ad bo ard DRAWERS ON RIGHT SIDE OF BED rd oa b ad He www.sauder.
Step 14 å å Insert the drawers into your unit. å This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry. IMPORTANT: If your bed has Headboard 415548 attached, remove it before moving the bed. And to celebrate, why not share your success story? 30 lbs. 30 lbs. Page 18 415465 www.sauder.
415465 Utilisez les instructions d’assemblage en français avec les schémas étape par étape du manuel d’instruction en anglais. Chaque étape en français correspond à la même étape en anglais. La pièce devant être attachée à l’élément est représentée en gris sur les schémas de chaque étape pour plus de précision. Comparer la “Liste de pièces” ci-dessous avec la “PART IDENTIFICATION” du manuel en anglais pour vous familiariser avec les pièces avant l’assemblage.
ÉTAPE 1 ÉTAPE 9 Ne pas serrer les EXCENTRIQUES ESCAMOTABLES dans cette étape. Fixer la TÊTE DE LIT (A2) aux TRAVERSES (J2). Utiliser quatre VIS TÊTE PLATE 49 mm NOIRES (113S). Assembler l'élément sur un sol à moquette ou sur le carton vide pour éviter d'endommager l'élément ou le sol. Enfoncer quatre EXCENTRIQUES ESCAMOTABLES (1F) dans les ENTRETOISES DE TIROIR (G). Serrer quatre VIS D'EXCENTRIQUE (8F) dans les DEVANTS DE TIROIR (E2). ÉTAPE 2 Fixer les TRAVERSES (J2) aux PIEDS (D2).
415465 Use estas instrucciones de ensamblaje en español junto con las figuras paso-a-paso provistas en el folleto inglés. Cada paso en español corresponde al mismo paso en inglés. Se destacan las figuras de cada paso con una tonalidad oscura para mostrar precisamente cual parte se debe montar a la unidad. Compare la “Lista de Part” abajo con la “Part Identification” en el folleto en inglés para familiarizarse con Las partes de ensamblaje.
PASO 1 PASO 9 No apriete los EXCÉNTRICOS ESCONDIDOS en este paso. Fije la CABECERA DE CAMA (A2) a los RIELES (J2). Utilice cuatro TORNILLOS NEGROS DE CABEZA PERDIDA de 49 mm (113S). Ensamble la unidad sobre un piso alfombrado o sobre el cartón vacío para evitar rayar la unidad o el piso. Empuje dos EXCÉNTRICOS ESCONDIDOS (1F) dentro de las RIOSTRAS DE CAJÓN (G). Atornille cuatro BIELAS DE EXCÉNTRICO (8F) dentro de las CARAS DE CAJÓN (E2). Fije las PLATAFORMAS (C) a los SOPORTES (K2).
1-YEAR LIMITED WARRANTY 1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a period of one year from the date of purchase against defects in materials or workmanship of Sauder furniture components. As used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 2.
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the purchase and assembly process was a positive experience and you feel good about the furniture you just built. If you need assistance or want to learn more, please contact our award-winning, Ohio-based customer service team at 800-523-3987 or Sauder.com. Set a world record for speed? Feeling good about yourself? Nice. Get social with it on any of these quality share sites.
