Instructions / Assembly

To insert the drawer into your unit, tip the front of the drawer down and drop the rollers on the drawer behind the rollers on the unit.

Lift the front of the drawer up and slide it into the unit.

Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert the METAL PINS into the hole locations of your choice in the

ENDS (A and B) and UPRIGHTS (C and D). Set the ADJUSTABLE SHELVES (M) onto the METAL PINS.

To help prevent the TV from sliding, place the ANTI-SKID PAD (3M) under the front support of the TV or divide among the front

supports if more than one.

Apply the WARNING LABEL (3L) to the TOP (E). You should be able to read the label when the TV is removed from the unit. When

the TV is in place, it should hide the label. Peel off the backing and apply the label as shown in the diagram.

NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it.

Page 27

www.sauder.com/services415321

20 lbs.

95 lbs.

40 lbs.

25 lbs.

Place the roller on the SLIDE

behind the roller on the RAIL.

WARNING

Never use this furniture with a TV that is

too large or too heavy. Severe injury or

death can occur. The TV and furniture

will be unstable and may tip.

- The TV must weigh less than 95 lbs.

- The base of the TV must be able to sit

completely on this shelf.

(16 used)