Instructions / Assembly

Page 26 www.sauder.com/services 415321
21
21
S
t
e
p
1
2
3
4
1
2
3
Roller end
Roller end
GOLD 5/16" FLAT HEAD SCREW
(12 used in this step)
3S
Insert a SLIDE CAM (10A ) into the DRAWER SIDES (D10 and D11).
Fasten a DRAWER RIGHT (40CC) and a DRAWER LEFT (40CD) to the DRAWER SIDES (D10 and D11). Use four GOLD 5/16"
FLAT HEAD SCREWS (3S) through holes #1 and #4.
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
Fasten two KNOBS (17K) to the DRAWER FRONT (U). Use two BLACK 7/8" MACHINE SCREWS (37S).
Repeat this step for the other drawers.
4
D10
D11
BLACK 7/8" MACHINE SCREW
(6 used in this step for the KNOBS)
37S
Screw head - turn CAM to
line up holes in SLIDES with
holes in DRAWER SIDES.
10A
10A
17K
(6 used in this step)