Instructions / Assembly

Page 25

www.sauder.com/services415321

Insert two of the DRAWER SIDES (D10 and D11) at an angle into

the slot at each end of a DRAWER FRONT (U).

Slide a DRAWER BOTTOM (D983) into the grooves in the

DRAWER SIDES (D10 and D11) and DRAWER FRONT (U).

Groove

The tabs should insert freely into the slots.

Gently tilt the DRAWER SIDES side to

side until the tabs slip into the slots.

UNFINISHED

Surface with

HIDDEN CAM

VIEW THE T-LOCK BOX VIDEO

Be sure the DRAWER

BOTTOM inserts into the

DRAWER FRONT groove.

Fasten a DRAWER BRACE (CC) to the DRAWER FRONT (U).

Tighten one HIDDEN CAM.

Fasten a DRAWER BACK (D174) to the DRAWER SIDES

(D10 and D11) and DRAWER BRACE (CC). Use five BLACK

1-9/16" FLAT HEAD SCREWS.

Repeat step 20 for the remaining drawer parts.

Start each screw a few turns before

completely tightening any of them.

BLACK 1-9/16" FLAT HEAD SCREW

(15 used in this step)

30S

With the palm of your hand, tap the

DRAWER BOTTOM down into the groove.

Maximum

210 degrees

Minimum

190 degrees

Arrow

D10

D11

D983

D174