Instructions / Assembly

Step 1
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å
Assemble your unit on a carpeted fl oor or on the empty
carton to avoid scratchin your unit or the fl oor.
å
To bein assembly, push a SAUDER TWIST-LOCK®
FASTENER (10F) into the lare holes in the BRACES (D and E).
å
NOTE: Do not push any TWIST-LOCK® FASTENERS into the
indicated holes in the UPPER BRACE (E) at this time. If you
need to remove a TWIST-LOCK® FASTENER from a hole,
pull the FASTENER back out of the hole. Pull at the front and
back edes, slowly workin the FASTENER out of the hole.
414941www.sauder.com/services
Pae 5
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=904
to watch a video on how to assemble your unit.
Do not tihten the TWIST-LOCK® FASTENERS in this step.
D
E
D
10F
10F
10F
Do not push TWIST-LOCK®
FASTENERS into these holes
at this time.
Do not push TWIST-LOCK®
FASTENERS into these holes
at this time.