Instructions / Assembly

å
First, fi ll the four holes in the FRONT PANEL (F2) 1/4 to 1/2
full with GLUE (8M). Then, insert a WOOD DOWEL (15F)
into each hole. Wipe away the excess GLUE.
å
Fill the two holes in the RIGHT END (A2) 1/4 to 1/2 full
with GLUE. Then, insert the WOOD DOWELS in the
FRONT PANEL (F2) into these holes. Wipe away the
excess GLUE.
å
Next, fi ll the two holes in the LEFT END (B2) 1/4 to 1/2 full
with GLUE (8M). Then, insert the WOOD DOWELS (15F)
in the FRONT PANEL (F2) into the holes in the LEFT END.
Wipe away the excess GLUE.
å
Fasten the LEFT END (B2) to the BOTTOM (D). Tighten
two HIDDEN CAMS.
Step 5
414434www.sauder.com/services
Page 9
Fill the holes 1/4 to 1/2 full with GLUE.
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely di cult.
Caution
!
8M
A2
B2
D
F2
15F
15F
Arrow
Minimum
190 degrees
Maximum
210 degrees
Curved edge
Surface without
HIDDEN CAMS