Instructions / Assembly

å
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D22 and D23).
å
Fasten the DRAWER RIGHT (35GC) and DRAWER LEFT (35GD) to the DRAWER SIDES (D22 and D23). Use four GOLD
5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Fasten two KNOBS (59K) to the LARGE DRAWER FRONT (H). Use two BLACK 1-1/8" PAN HEAD SCREWS (9S).
å
Repeat this step for the other large drawer and the small drawer.
Step 11
414434www.sauder.com/services
Page 15
59K
H
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
1
2
3
10A
10A
D22
D23
Roller end
Roller end
1
2
3
BLACK 1-1/8" PAN HEAD SCREW
(6 used for the KNOBS)
9S
GOLD 5/16" FLAT HEAD SCREW
(12 used in this step)
3S