Instructions / Assembly

Step 10
414434 www.sauder.com/servicesPage 14
VIEW THE T-LOCK BOX VIDEO
å
Fasten the LARGE DRAWER BACK (D80) to the LARGE DRAWER SIDES (D22 and D23). Use four BLACK 1-9/16" FLAT
HEAD SCREWS (30S).
å
NOTE: Be sure the DRAWER BOTTOM (D704) inserts into the groove of the DRAWER BACK (D80).
å
Repeat this step for the remaining drawers.
12
3
å
Insert the LARGE DRAWER SIDES (D22 and D23) at
an angle into the slot at each end of the LARGE
DRAWER FRONT (H).
å
Slide the DRAWER BOTTOM (D704) into the grooves in
the LARGE DRAWER SIDES (D22 and D23) and LARGE
DRAWER FRONT (H).
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
Groove
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
D22
D23
D704
H
Unfi nished
surface
With the palm of
your hand, tap the
DRAWER BOTTOM
down into the groove.
D22
D23
H
D22
D23
D704
D80
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(12 used in this step)
30S