sauder.com It's addicting. Coffee Table Beginnings Collection | Model 414291 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. Prefer the phone? Call 1-800-523-3987. Share your journey! PLEASE READ AND KEEP FOR FUTURE REFERENCE. English pg 1-9 Français pg 10-11 Español pg 12-13 Lot # 390063 04/21/16 Purchased: __________________ Be sure to give us a ring before making any returns.
Table of Contents Assembly Tools Required Part Identification 2 Hardware Identification Assembly Steps No. 2 Phillips Screwdriver Tip Shown Actual Size 3 4-9 Hammer Français 10-11 Español 12-13 Safety 14 Warranty 15 Not actual size Skip the power trip. This time. Part Identification å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit. 5F HIDDEN CONNECTOR - 10 2S BLACK 1-7/8" FLAT HEAD SCREW - 12 9S BLACK 1-1/8" PAN HEAD SCREW - 8 www.sauder.
Look for this icon. It means a video assembly tip is available at www.sauder.com/services/tips Step 1 å Insert a CONNECTOR SCREW (8S) into each HIDDEN CONNECTOR (5F). 5F 8S Step 2 å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. å Use your hammer to tap three HIDDEN CONNECTORS (5F) with SCREWS into the large holes in the LONG BRACE (B). å Repeat this step for the other LONG BRACE (B) and SHORT BRACES (C). 5F B Page 4 414291 www.sauder.
Step 3 å Fasten the LONG BRACES (B) and SHORT BRACES (C) to the TOP (A). Tighten ten HIDDEN CONNECTORS. å Fasten the SHORT BRACES (C) to the LONG BRACES (B). Use four BLACK 1-7/8" FLAT HEAD SCREWS (2S). How to use the HIDDEN CONNECTOR To fasten two parts together using the HIDDEN CONNECTORS, insert your screwdriver, at an angle, into the slot in the HIDDEN CONNECTOR. While pushing the screw into the hole of the adjoining part, turn the screwdriver clockwise to tighten.
Step 4 å Insert two METAL PINS (1R) into a short edge of the SHORT BRACES (C). å Fasten the LEGS (E and F) to the SHORT BRACES (C). Use two BLACK 1-7/8" FLAT HEAD SCREWS (2S). å NOTE: Be sure the METAL PINS insert into the holes in the LEGS (E and F). å Fasten the LEGS (E and F) to the LONG BRACE (B). Use four BLACK 1-1/8" PAN HEAD SCREWS (9S). 2S 1R BLACK 1-7/8" FLAT HEAD SCREW (2 used in this step) E 9S BLACK 1-1/8" PAN HEAD SCREW (4 used in this step) 1R C F B C Page 6 414291 www.
Step 5 å å Insert a METAL PIN (1R) into a short edge of the LEG BRACES (D). å NOTE: Be sure the PINS in the BRACES insert into the LEGS. Fasten the LEG BRACES (D) to the LEGS (E and F). Use two BLACK 1-7/8" FLAT HEAD SCREWS (2S). 2S BLACK 1-7/8" FLAT HEAD SCREW (2 used in this step) 1R E D 1R F D www.sauder.
Step 6 å å å Insert a METAL PIN (1R) into the short edges of the LEG BRACES (D) and SHORT BRACES (C). å NOTE: Be sure the PINS in the BRACES insert into the LEGS. Fasten the LEGS (E and F) to the LONG BRACE (B). Use four BLACK 1-1/8" PAN HEAD SCREWS (9S). Fasten the LEGS (E and F) to the SHORT BRACES (C) and LEG BRACES (D). Use four BLACK 1-7/8" FLAT HEAD SCREWS (2S).
Step 7 å å å å Carefully stand your unit upright. Center a SCREW COVER (20P) over the head of each SCREW and press firmly. NOTE: Please read the back pages of the instruction booklet for important safety information. This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry. And to celebrate, why not share your success story? 40 lbs. (12 used) 20P To cover screws www.sauder.
Modèle 414291 Utilisez les instructions d’assemblage en français avec les schémas étape par étape du manuel d’instruction en anglais. Chaque étape en français correspond à la même étape en anglais. La pièce devant être attachée à l’élément est représentée en gris sur les schémas de chaque étape pour plus de précision. Comparer la “Liste de pièces” ci-dessous avec la “PART IDENTIFICATION” du manuel en anglais pour vous familiariser avec les pièces avant l’assemblage.
ÉTAPE 1 ÉTAPE 5 Insérer une VIS DE CONNECTEUR (8S) dans chaque CONNECTEUR ESCAMOTABLE (5F). Insérer une GOUPILLE EN MÉTAL (1R) dans un chant court des ENTRETOISES DE PIED (D). ÉTAPE 2 Assembler l'élément sur un sol à moquette ou sur le carton vide pour éviter d'endommager l'élément ou le sol. Utiliser un marteau pour enfoncer trois CONNECTEURS ESCAMOTABLES (5F) avec les VIS dans les gros trous de l'ENTRETOISE LONGUE (B).
Modelo 414291 Use estas instrucciones de ensamblaje en español junto con las figuras paso-a-paso provistas en el folleto inglés. Cada paso en español corresponde al mismo paso en inglés. Se destacan las figuras de cada paso con una tonalidad oscura para mostrar precisamente cual parte se debe montar a la unidad. Compare la “Lista de Part” abajo con la “Part Identification” en el folleto en inglés para familiarizarse con Las partes de ensamblaje.
PASO 1 PASO 5 Inserte un TORNILLO CONECTOR (8S) dentro de cada CONECTOR INVISIBLE (5F). Inserte una ESPIGA DE METAL (1R) en el borde corto de las RIOSTRAS DE LAS PATAS (D). PASO 2 Ensamble la unidad sobre un piso alfombrado o sobre el cartón vacío para evitar rayar la unidad o el piso. Utilice su martillo para clavar tres CONECTORES INVISIBLES (5F) con TORNILLOS entre los agujeros grandes en la RIOSTRA LARGA (B). Repita este paso para la otra RIOSTRA LARGA (B) y las RIOSTRAS CORTAS (C).
WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded shelves. • Risk of injury. • Top-heavy furniture can tip over. • Overloaded shelves can break. • Never exceed the weight limits shown in the instructions. • Work from bottom to top when loading shelves. Place the heavier items on the lower shelves.
1-YEAR LIMITED WARRANTY 1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a period of one year from the date of purchase against defects in materials or workmanship of Sauder furniture components. As used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 2.
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the purchase and assembly process was a positive experience and you feel good about the furniture you just built. If you need assistance or want to learn more, please contact our award-winning, Ohio-based customer service team at 800-523-3987 or Sauder.com. Set a world record for speed? Feeling good about yourself? Nice. Get social with it on any of these quality share sites.