Instructions / Assembly

Step 14
413123 www.sauder.com/servicesPage 18
å
Apply the WARNING LABEL (5L) to the upper DRAWER SIDE (D488).
You should be able to read the label when the drawer is open. When the
drawer is closed, it will hide the label. Peel o the backing and apply the
label as shown in the diagram.
å
NOTE: This is a permanent label intended to last for the life of the
product. Once applied, do not try to remove it.
å
Peel the APPLIQUES from the APPLIQUE CARD (29P). Stick the
APPLIQUES over the heads of each visible SCREW
in the ENDS (A and B).
å
We recommend using the SAFETY BRACKET (1G) for added stability.
Use a BLACK 9/16" LARGE HEAD SCREW (1S) into the top of the unit
and a BLACK 1-7/8" FLAT HEAD SCREW (2S) into a stud in your wall.
å
NOTE: Please read the back pages of the instruction booklet for
important safety information.
å
This completes assembly. Clean with your favorite
furniture polish or a damp cloth. Wipe dry.
Serious or fatal crushing injuries can
occur from furniture tip-over. To help
prevent tip-over:
-Place heaviest items in the lowest drawers.
-Unless specifi cally designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
-Never allow children to climb or hang on
drawers, doors, or shelves.
-Never open more than one drawer at a time.
-If equipped with a drawer interlock system, do not
defeat or remove it.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
WARNING
D488
29P
A
B
And to celebrate, why not share your success story?
30 lbs.
25 lbs.
30 lbs.
25 lbs. each
20 lbs.
(4 used)
1G
1S
BLACK 9/16" LARGE HEAD SCREW
(1 used into the top of your unit)
BLACK 1-7/8" FLAT HEAD SCREW
(1 used into a stud in your wall)
2S
5L