Instructions / Assembly

å
Carefully stand your unit upright.
å
Fasten two HINGES (14H) to the DOOR (G). Use four
BLACK 1/2" FLAT HEAD SCREWS (11S).
å
Before fastening the DOOR to your unit, be sure the
mounting screw is against the stops as shown in the
diagram. If it isn't, loosen the mounting screw to slide it
against the stops. Then tighten the mounting screw.
å
Fasten the DOOR (G) to the LEFT END (B). Use the screws
in the HINGES. See the next step for door adjustments.
å
Fasten a PULL (45K) to the DOOR (G). Use two SILVER
7/8" MACHINE SCREWS (24S).
å
Repeat this step for the other DOOR (G).
Step 8
413123 www.sauder.com/servicesPage 12
B
G
45K
SILVER 7/8" MACHINE SCREW
(4 used for the PULLS)
24S
G
BLACK 1/2" FLAT HEAD SCREW
(8 used for the HINGES)
11S
Mounting
screw
Stop
Hinge
14H