Instructions / Assembly

å
Insert four METAL PINS (1R) into the BACKS (E).
å
Insert the METAL PINS (1R) in the BACKS (E) into the
holes in the TOP (C).
å
Fasten the BACKS (E) to the ENDS (A2 and B2). Use four
BROWN 7/16" LARGE HEAD SCREWS (6S) through the
ANGLE BRACKETS on the BACKS and into the ENDS.
Step 5
413081www.sauder.com/services
Page 9
A2
B2
C
E
E
1R
Edge and surface with
ANGLE BRACKETS.
Edge and surface with
ANGLE BRACKETS.
(4 used)
BROWN 7/16" LARGE HEAD SCREW
(4 used in this step)
6S