Instructions / Assembly

å
NOTE: Before beginning this step, separate the SLIDES from the SLIDE SETS (16B) and the DRAWER PINS at the end of
the SLIDES using a SCISSORS. Save the DRAWER PINS. You will use them in Step 11.
å
Fasten the SLIDES (16B) to the ENDS (A2 and B2). Use sixteen SILVER 3/4" PAN HEAD SCREWS (52S) through the fi rst
and last holes in the SLIDES.
å
NOTE: The SLIDES are marked "RIGHT" and "LEFT" for easy identifi cation. The SLIDES marked "RIGHT" will fasten to the
RIGHT END (A2) and the SLIDES marked "LEFT" will fasten to the LEFT END (B2). There are also arrows on the SLIDES
for correct positioning on the ENDS.
Step 2
413081 www.sauder.com/servicesPage 6
16B
A2
B2
16B
16B
16B
16B
16B
16B
16B
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Finished edge
SILVER 3/4" PAN HEAD SCREW
(16 used in this step)
52S
Notch
Straight edge
Angled edge
16B
DRAWER PIN
(Save for Step 11)
Using your Scissors, separate the
SLIDES and the DRAWER PINS.
RIGHT SLIDES
LEFT SLIDES
Finished edge