Instructions / Assembly

å
Apply the WARNING LABEL (5L) to the upper LEFT DRAWER SIDE (D488). You should be able to read the label when the drawer is
open. When the drawer is closed, it will hide the label. Peel o the backing and apply the label as shown in the diagram.
å
NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it.
å
We recommend using the SAFETY BRACKET (1G) for added stability. Use a BLACK 9/16” LARGE HEAD SCREW (1S) into
the top of the unit and a BLACK 1-7/8” FLAT HEAD SCREW (2S) into a stud in your wall.
å
Peel the APPLIQUES from the APPLIQUE CARD (29P). Stick the APPLIQUES over the heads of each visible SCREW in
the ENDS (A2 and B2).
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
Step 12
413081 www.sauder.com/servicesPage 16
29P
A2
B2
Serious or fatal crushing injuries can
occur from furniture tip-over. To help
prevent tip-over:
-Place heaviest items in the lowest drawers.
-Unless specifi cally designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
-Never allow children to climb or hang on
drawers, doors, or shelves.
-Never open more than one drawer at a time.
-If equipped with a drawer interlock system, do not
defeat or remove it.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
WARNING
5L
1G
BLACK 9/16" LARGE HEAD SCREW
(1 used into the top of your unit)
1S
BLACK 1-7/8" FLAT HEAD SCREW
(1 used into a stud in your wall)
2S
And to celebrate, why not share your success story?
D488
(12 used)
35 lbs.
20 lbs.
30 lbs. each
L
H
H
H