Instructions / Assembly

å
Carefully stand your unit upright.
å
To insert the drawer into your unit, line up the grooves on
the DRAWER SIDES with the SLIDES on your unit. Slide
the drawer into the unit until it is about 3" or 4" away from
the back of your unit.
å
Using your hammer, gently tap two DRAWER PINS (from
Step 2) into the holes in your DRAWER SIDES (D486).
å
NOTE: The DRAWER PINS are used as a locking system
for your drawer. When the DRAWER PINS are in place,
you will not be able to remove the drawer from your unit.
å
Repeat this step for the other drawers.
å
NOTE: Be sure you insert the smaller drawer (L) into the
top space of your unit.
Step 11
413081www.sauder.com/services
Page 15
Pro Tip: Lift with your
legs. And, you know,
your arms.
D486
D486
D486
DRAWER PIN