sauder.com Sit and surf. Corner Desk Beginnings Collection | Model 413073 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. Prefer the phone? Call 1-800-523-3987. Share your journey! PLEASE READ AND KEEP FOR FUTURE REFERENCE. English pg 1-11 Français pg 12-13 Español pg 14-15 Lot # 390143 04/26/16 Purchased: __________________ Be sure to give us a ring before making any returns.
Table of Contents Part Identification Hardware Identification Assembly Steps Assembly Tools Required 3 No. 2 Phillips Screwdriver Tip Shown Actual Size 4 5-11 Hammer Français 12-13 Español 14-15 Safety 16-18 Warranty Page 2 Not actual size Skip the power trip. This time. 19 413073 www.sauder.
Now you know our ABCs. Part Identification å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts. A RIGHT UPRIGHT (2) B LEFT UPRIGHT (2) C TOP (1) D BOTTOM (2) E ADJUSTABLE SHELF (2) F BACK (2) G SKIRT (2) C F F A B E E B D D A G www.sauder.
Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit. 1F 5G ANGLE BRACKET - 6 1N 10P GROMMET - 2 12P CAM COVER - 8 1R 1S Page 4 2F HIDDEN CAM - 8 1P NAIL - 32 2S 413073 GROMMET CAP - 2 20P SCREW COVER - 8 2R METAL PIN - 8 BLACK 9/16" LARGE HEAD SCREW - 12 CAM DOWEL - 8 RUBBER SLEEVE - 8 BLACK 1-7/8" FLAT HEAD SCREW - 8 www.sauder.
Look for this icon. It means a video assembly tip is available at www.sauder.com/services/tips Step 1 å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. å Push eight HIDDEN CAMS (1F) into the UPRIGHTS (A and B). Then, insert a CAM DOWEL (2F) into each HIDDEN CAM. Do not tighten the HIDDEN CAMS in this step. Arrow 1F 2F (8 used) A A B B Arrow Insert the metal end of the CAM DOWEL into the HIDDEN CAM. www.sauder.
Step 2 å Fasten the UPRIGHTS (A and B) to the BOTTOMS (D). Use eight BLACK 1-7/8" FLAT HEAD SCREWS (2S). Caution Do not stand the unit upright without the BACK fastened. The unit may collapse. Finished edge A Finished edge B D A This hole must be here. B D This hole must be here. 2S BLACK 1-7/8" FLAT HEAD SCREW (8 used in this step) Page 6 413073 www.sauder.
Step 3 å Fasten six ANGLE BRACKETS (5G) to the SKIRTS (G). Use six BLACK 9/16" LARGE HEAD SCREWS (1S). å NOTE: Be sure the edges of the ANGLE BRACKETS are even with the edges of the SKIRTS. 1S BLACK 9/16" LARGE HEAD SCREW (6 used in this step) 5G 5G G G 5G www.sauder.
Step 4 å Fasten the SKIRTS (G) to the UPRIGHTS (A and B) and BOTTOMS (D). Use six BLACK 9/16" LARGE HEAD SCREWS (1S). 1S BLACK 9/16" LARGE HEAD SCREW (6 used in this step) A G B G D A B D Page 8 Curved edge 413073 www.sauder.
Step 5 å Fasten the UPRIGHTS (A and B) to the TOP (C). Tighten eight HIDDEN CAMS. B Unfinished edge A A B C Finished edge Caution Risk of damage or injury. HIDDEN CAMS must be completely tightened. HIDDEN CAMS that are not completely tightened may loosen, and parts may separate. To completely tighten: www.sauder.
Step 6 å Carefully turn your unit over onto its front edges. Lay a BACK (F) over one side of your unit. å Make equal margins along all four edges of the BACK (F). Push on opposite corners of your unit if needed to make it "square". å å å Fasten the BACK (F) to your unit using the NAILS (1N). Caution Do not stand the unit upright without the BACK fastened. The unit may collapse. Repeat this step to fasten the other BACK (F). NOTE: Perforations have been provided for access through the BACKS.
Step 7 å å Carefully stand your unit upright. å å å å å Insert two GROMMETS (10P) and GROMMET CAPS (1P) into the large holes in the TOP (C). Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert the METAL PINS into the hole locations of your choice in the UPRIGHTS (A and B). Set the ADJUSTABLE SHELVES (E) onto the METAL PINS. Center a SCREW COVER (20P) over the head of each visible SCREW and press firmly. Push a CAM COVER (12P) onto each visible HIDDEN CAM.
Modèle 413073 Utilisez les instructions d’assemblage en français avec les schémas étape par étape du manuel d’instruction en anglais. Chaque étape en français correspond à la même étape en anglais. La pièce devant être attachée à l’élément est représentée en gris sur les schémas de chaque étape pour plus de précision. Comparer la “Liste de pièces” ci-dessous avec la “PART IDENTIFICATION” du manuel en anglais pour vous familiariser avec les pièces avant l’assemblage.
ÉTAPE 1 ÉTAPE 6 Ne pas serrer les EXCENTRIQUES ESCAMOTABLES dans cette étape. Attention: Ne pas relever l'élément dans sa position verticale avant d'avoir fixé l’ARRIÈRE. L'élément risque de s'effondrer. Assembler l'élément sur un sol à moquette ou sur le carton vide pour éviter d'endommager l'élément ou le sol. Avec précaution, retourner l'élément sur ses chants avant. Poser l’ARRIÈRE (F) sur l’un côté de l’unité. Enfoncer huit EXCENTRIQUES ESCAMOTABLES (1F) dans les MONTANTS (A et B).
Modelo 413073 Use estas instrucciones de ensamblaje en español junto con las figuras paso-a-paso provistas en el folleto inglés. Cada paso en español corresponde al mismo paso en inglés. Se destacan las figuras de cada paso con una tonalidad oscura para mostrar precisamente cual parte se debe montar a la unidad. Compare la “Lista de Part” abajo con la “Part Identification” en el folleto en inglés para familiarizarse con Las partes de ensamblaje.
PASO 1 PASO 6 No apriete los EXCÉNTRICOS ESCONDIDOS en este paso. Precaución: No coloque la unidad en posición vertical hasta que se fije el DORSO. La unidad podría caerse. Ensamble la unidad sobre un piso alfombrado o sobre el cartón vacío para evitar rayar la unidad o el piso. Empuje ocho EXCÉNTRICOS ESCONDIDOS (1F) dentro de los PARALES (A y B). A continuación, inserte un PASADOR DE EXCÉNTRICO (2F) dentro de cada EXCÉNTRICO ESCONDIDO.
WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded shelves and drawers. • Improper loading can cause the product to be top-heavy. • Risk of injury. • Top-heavy furniture can tip over. • Overloaded shelves and drawers can break. • Never exceed the weight limits shown in the instructions.
AVERTISSEMENT Prière d’utiliser le mobilier à bon escient et avec prudence. Une mauvaise utilisation peut être à l’origine de risques d’accident ou peut endommager le mobilier et les articles ménagers. Lire attentivement le tableau suivant. À surveiller : Danger éventuel : Solution : • Tablettes et tiroirs surchargés. • En cas de chargement inadéquat l’élément peut être lourd du haut. • Risque de blessure. • Du mobilier mal équilibré risque de se renverser.
ADVERTENCIA Por favor use el mobiliario correcta y seguramente. El mal uso puede causar riesgos de seguridad o daño a las unidades o artículos domésticos. Cuidadosamente lea la tabla a continuación. Esté alerto de: Puede ocurrir: Evitar el problema: • Estantes y cajones sobrecargados. • Riesgo de lesiones. • Cargar el producto de manera inadecuada • El mobiliario inestable puede volcarse. puede causar la inestabilidad. • Estantes y cajones sobrecargados pueden romperse.
1-YEAR LIMITED WARRANTY 1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a period of one year from the date of purchase against defects in materials or workmanship of Sauder furniture components. As used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 2.
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the purchase and assembly process was a positive experience and you feel good about the furniture you just built. If you need assistance or want to learn more, please contact our award-winning, Ohio-based customer service team at 800-523-3987 or Sauder.com. Set a world record for speed? Feeling good about yourself? Nice. Get social with it on any of these quality share sites.