Instructions / Assembly

Step 1

Look for this icon. It means a

video assembly tip is available at

www.sauder.com/services/tips

Assemble your unit on a carpeted ﬂ oor or on the empty

carton to avoid scratching your unit or the ﬂ oor.

Push ten HIDDEN CAMS (1F) into the BOTTOM (J), TV SHELF (L),

and LOWER BACK (P) as shown in the upper diagram. Then, insert

the metal end of a CAM DOWEL (2F) into each HIDDEN CAM.

Push sixteen HIDDEN CAMS (1F) into the LARGE ENDS (A and C),

LARGE UPRIGHTS (E2 and G2), SMALL ENDS (B and D), and SMALL

UPRIGHTS (F2 and H2) as shown in the lower diagram.

413044www.sauder.com/services

Page 5

Scan this QR code or go to this address:

http://qr.sauder.com/?ID=1480

to watch a video on how to assemble your unit.

Arrow

The arrow in the HIDDEN

CAM must point toward the

hole in the edge of the board.

Hole

Arrow

(16 used)

Do not insert CAM

DOWELS into these parts.

(10 used)

Arrow

Do not tighten the HIDDEN

CAMS in this step.

Insert the metal end of the CAM

DOWEL into the HIDDEN CAM.

Arrow