Instructions / Assembly

å
We recommend using the SAFETY BRACKET (1G) for added stability. Use a BROWN 7/16” LARGE HEAD SCREW (6S)
into the top of the unit and a BLACK 1-7/8” FLAT HEAD SCREW (2S) into a stud in your wall.
å
Apply the WARNING LABEL (1L) to the TV SHELF (L). You should be able to read the label when the TV is removed from
the unit. When the TV is in place, it should hide the label. Peel o the backing and apply the label as shown in the diagram.
å
NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it.
å
To help prevent the TV from sliding, place the ANTI-SKID PAD (3M) under the front support of the TV or divide among the
front supports if more than one.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
Step 14
413044 www.sauder.com/servicesPage 18
And to celebrate, why not share your success story?
1L
L
BLACK 1-7/8" FLAT HEAD SCREW
(1 used into a stud in your wall)
2S
BROWN 7/16" LARGE HEAD SCREW
(1 used into the top of your unit)
6S
1G
50 lbs.
20 lbs.
7 lbs.
7 lbs.
7 lbs.
7 lbs.
7 lbs.
7 lbs.
7 lbs.
30 lbs.
30 lbs.
WARNING
Never use this furniture with a TV that is too
large or too heavy. Severe injury or death can
occur. The TV and furniture will be unstable
and may tip.
- The TV must weigh less than 50 lbs.
- The base of the TV must be able to sit
completely on this shelf.
7 lbs.
7 lbs.
7 lbs.
3M