Instructions / Assembly

å
Fasten fi ve ANGLE BRACKETS (5G) to the LARGE SKIRT (R)
as shown in the upper diagram. Use fi ve BROWN 7/16" LARGE
HEAD SCREWS (6S).
å
NOTE: Be sure the edges of the ANGLE BRACKETS are
even with the edges of the LARGE SKIRT.
å
Stand the SMALL ENDS (B and D) and SMALL
UPRIGHTS (F2 and H2) onto their fi nished edges as
shown in the lower diagrams.
å
Fasten the LARGE SKIRT (R) to the BOTTOM (J) and
SMALL UPRIGHTS (F2 and H2). Use fi ve BROWN
7/16" LARGE HEAD SCREWS (6S) through the ANGLE
BRACKETS (5G).
Step 9
413044www.sauder.com/services
Page 13
5G
5G
R
R
J
F2
H2
B
D
Unfi nished surface
Unfi nished surface
5G
Finished edge
Finished edge
BROWN 7/16" LARGE HEAD SCREW
(10 used in this step)
6S