Instructions / Assembly

å
Fasten four ANGLE BRACKETS (5G) to each SMALL
SKIRT (T) as shown in the upper diagram. Use eight
BROWN 7/16" LARGE HEAD SCREWS (6S).
å
NOTE: Be sure the edges of the ANGLE BRACKETS are
even with the edges of the SMALL SKIRTS.
å
Stand the SMALL ENDS (B and D) and SMALL UPRIGHTS (F2
and H2) onto their fi nished edges as shown in the lower diagrams.
å
Fasten the SMALL SKIRTS (T) to the SMALL ENDS (B
and D) and SMALL UPRIGHTS (F2 and H2). Use eight
BROWN 7/16" LARGE HEAD SCREWS (6S) through the
ANGLE BRACKETS (5G).
Step 7
413044www.sauder.com/services
Page 11
5G
5G
T
T
T
T
F2
H2
B
D
N
N
BROWN 7/16" LARGE HEAD SCREW
(16 used in this step)
6S
Unfi nished edge
Unfi nished edge
The ANGLE
BRACKETS will be
further from this edge.
The ANGLE
BRACKETS will be
further from this edge.
Finished edge
Finished edge