sauder.com Entertaining what entertains you. Entertainment Wall System Beginnings Collection | Model 413044 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. Prefer the phone? Call 1-800-523-3987. Share your journey! PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Table of Contents Part Identification Hardware Identification Assembly Steps Assembly Tools Required 3 4 5-18 Français 19-21 Español 22-24 Safety 25-26 Warranty No. 2 Phillips Screwdriver Tip Shown Actual Size Skip the power trip. This time. 27 ! WARNING Use of a TV that is too heavy or large is hazardous. A TV that is too heavy will create a risk of a tip-over that can cause severe injury or death.
Now you know our ABCs. Part Identification å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit. 1F HIDDEN CAM - 26 5G ANGLE BRACKET - 13 2F 22F DOUBLE DOWEL - 8 CAM DOWEL - 10 1L 1G SAFETY BRACKET - 1 3M ANTI-SKID PAD - 1 WARNING LABEL - 1 WARNING Never use this furniture with a TV that is too large or too heavy. Severe injury or death can occur. The TV and furniture will be unstable and may tip. -The TV must less than 50 lbs.
Look for this icon. It means a video assembly tip is available at www.sauder.com/services/tips Step 1 å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. å Push ten HIDDEN CAMS (1F) into the BOTTOM (J), TV SHELF (L), and LOWER BACK (P) as shown in the upper diagram. Then, insert the metal end of a CAM DOWEL (2F) into each HIDDEN CAM.
Step 2 å Fasten the LARGE UPRIGHTS (E2 and G2) to the UPPER SHELF (K). Use four BLACK 1-7/8" FLAT HEAD SCREWS (2S). Remember: Righty tighty. Lefty loosey. Finished edge Finished edge E2 K Finished edge G2 2S BLACK 1-7/8" FLAT HEAD SCREW (4 used in this step) Page 6 413044 www.sauder.
Step 3 å Fasten four SMALL SHELVES (N) to the LARGE UPRIGHTS (E2 and G2). Use eight BLACK 1-7/8" FLAT HEAD SCREWS (2S). Finished edge N E2 Finished edge N N G2 2S N BLACK 1-7/8" FLAT HEAD SCREW (8 used in this step) www.sauder.
Step 4 å Fasten the TV SHELF (L) to the LARGE UPRIGHTS (E2 and G2). Tighten four HIDDEN CAMS. å Fasten both BRACES (S) to the LARGE UPRIGHTS (E2 and G2), UPPER SHELF (K), and TV SHELF (L). Use fourteen BLACK 1-7/8" FLAT HEAD SCREWS (2S). Finished edge E2 K S S Fin ish ed sur fac e Finished edge ith e w MS c a f A Sur EN C D HID Fin ish ed sur fac e G2 L 2S BLACK 1-7/8" FLAT HEAD SCREW (14 used in this step) Caution Risk of damage or injury. HIDDEN CAMS must be completely tightened.
Step 5 å Fasten the UPPER BACK (O) to the UPPER SHELF (K) and LARGE UPRIGHTS (E2 and G2). Use five BLACK 1-7/8" FLAT HEAD SCREWS (2S). å Fasten the LARGE ENDS (A and C) to the SMALL SHELVES (N). Use eight BLACK 1-7/8" FLAT HEAD SCREWS (2S). Finished edge N Fi n is h ed su rf ac e A E2 O K N Finished edge N G2 C N 2S BLACK 1-7/8" FLAT HEAD SCREW (13 used in this step) www.sauder.
Step 6 å Fasten the SMALL ENDS (B and D) and SMALL UPRIGHTS (F2 and H2) to the remaining SMALL SHELVES (N). Use eight BLACK 1-7/8" FLAT HEAD SCREWS (2S). Don't worry. It isn't Rome. This can be built in a day. Finished edge Finished edge B N Finished edge F2 H2 Finished edge N D 2S BLACK 1-7/8" FLAT HEAD SCREW (8 used in this step) Page 10 413044 www.sauder.
Step 7 å Fasten four ANGLE BRACKETS (5G) to each SMALL SKIRT (T) as shown in the upper diagram. Use eight BROWN 7/16" LARGE HEAD SCREWS (6S). 6S å NOTE: Be sure the edges of the ANGLE BRACKETS are even with the edges of the SMALL SKIRTS. å Stand the SMALL ENDS (B and D) and SMALL UPRIGHTS (F2 and H2) onto their finished edges as shown in the lower diagrams. å Fasten the SMALL SKIRTS (T) to the SMALL ENDS (B and D) and SMALL UPRIGHTS (F2 and H2).
Step 8 å å Lay the SMALL UPRIGHTS (F2 and H2) as shown. Fasten the BOTTOM (J) to the SMALL UPRIGHTS (F2 and H2). Tighten four HIDDEN CAMS. Finished edge F2 ith e w MS c a f A Sur EN C D HID J Finished edge H2 Maximum 210 degrees Unfinished edge Arrow Minimum 190 degrees Page 12 413044 www.sauder.
Step 9 Fasten five ANGLE BRACKETS (5G) to the LARGE SKIRT (R) as shown in the upper diagram. Use five BROWN 7/16" LARGE HEAD SCREWS (6S). å NOTE: Be sure the edges of the ANGLE BRACKETS are even with the edges of the LARGE SKIRT. å Stand the SMALL ENDS (B and D) and SMALL UPRIGHTS (F2 and H2) onto their finished edges as shown in the lower diagrams. å Fasten the LARGE SKIRT (R) to the BOTTOM (J) and SMALL UPRIGHTS (F2 and H2). Use five BROWN 7/16" LARGE HEAD SCREWS (6S) through the ANGLE BRACKETS (5G).
Step 10 å å å å å Carefully turn over the lower portion of your unit until the finished edges are facing up as shown. Insert four METAL PINS (1R) into an UPRIGHT (I). Insert the METAL PINS (1R) in one end of the UPRIGHT (I) into the holes in the BOTTOM (J). Fasten the LOWER SHELF (M) to the SMALL UPRIGHTS (F2 and H2). Use four BLACK 1-7/8" FLAT HEAD SCREWS (2S). NOTE: Be sure the METAL PINS (1R) in the UPRIGHT (I) insert into the holes in the LOWER SHELF (M).
Step 11 å å Carefully turn your unit onto its finished edges as shown. Fasten the LOWER BACK (P) to the BOTTOM (J) and LOWER SHELF (M). Use four BLACK 1-7/8" FLAT HEAD SCREWS (2S). 2S P F2 J M R H2 2S BLACK 1-7/8" FLAT HEAD SCREW (4 used in this step) www.sauder.
Step 12 å å å å å Carefully position the upper and lower portions on their back edges as shown. å NOTE: Be sure the METAL PINS (1R) in the UPRIGHT (I) insert into the holes in the LOWER SHELF (M). Be sure the CAM DOWELS in the LOWER BACK (P) insert into the holes in the TV SHELF (L). These HIDDEN CAMS will be tightened in the next step. Insert four METAL PINS (1R) into the remaining UPRIGHT (I). Insert the METAL PINS (1R) in one end of the UPRIGHT (I) into the holes in the TV SHELF (L).
Step 13 å å å Carefully stand your unit upright. å å Center a SCREW COVER (20P) over the head of each SCREW and press firmly. Tighten two HIDDEN CAMS in the LOWER BACK (P). Push the RUBBER SLEEVES (2R) over the remaining METAL PINS (1R). Insert the METAL PINS into the hole locations of your choice in the LARGE ENDS (A and C) and LARGE UPRIGHTS (E2 and G2). Set the ADJUSTABLE SHELVES (Q) onto the METAL PINS. Pro Tip: Lift with your legs. And, you know, your arms.
Step 14 å We recommend using the SAFETY BRACKET (1G) for added stability. Use a BROWN 7/16” LARGE HEAD SCREW (6S) into the top of the unit and a BLACK 1-7/8” FLAT HEAD SCREW (2S) into a stud in your wall. å Apply the WARNING LABEL (1L) to the TV SHELF (L). You should be able to read the label when the TV is removed from the unit. When the TV is in place, it should hide the label. Peel off the backing and apply the label as shown in the diagram.
Modèle 413044 Utilisez les instructions d’assemblage en français avec les schémas étape par étape du manuel d’instruction en anglais. Chaque étape en français correspond à la même étape en anglais. La pièce devant être attachée à l’élément est représentée en gris sur les schémas de chaque étape pour plus de précision. Comparer la “Liste de pièces” ci-dessous avec la “PART IDENTIFICATION” du manuel en anglais pour vous familiariser avec les pièces avant l’assemblage.
AVERTISSEMENT ÉTAPE 3 L'utilisation d'un téléviseur trop lourd ou large est dangereuse. Un téléviseur trop lourd créera un risque de basculement pouvant provoquer de graves blessures voire la mort. Un téléviseur trop large pour l'espace disponible risque d'être accidentellement poussé ou de tomber du mobilier ou d'être sujet à basculer. • Vérifier la taille et le poids du téléviseur.
ÉTAPE 9 ÉTAPE 13 Fixer cinq CONSOLES À ÉQUERRE (5G) sur la GRANDE PLINTHE (R) comme l’indique le schéma supérieur. Utiliser cinq VIS MARRON TÊTE LARGE 11 mm (6S). REMARQUE : S’assurer que les chants des CONSOLES À ÉQUERRE sont à fleur des chants de la GRANDE PLINTHE. Positionner les PETITES EXTRÉMITÉS (B et D) et les PETITS MONTANTS (F2 et H2) comme l’indiquent les schémas inférieurs. Fixer la GRANDE PLINTHE (R) sur le DESSOUS (J) et les PETITS MONTANTS (F2 et H2).
Mueble de entretenimiento sistema mural Modelo 413044 Use estas instrucciones de ensamblaje en español junto con las figuras paso-a-paso provistas en el folleto inglés. Cada paso en español corresponde al mismo paso en inglés. Se destacan las figuras de cada paso con una tonalidad oscura para mostrar precisamente cual parte se debe montar a la unidad. Compare la “Lista de Part” abajo con la “Part Identification” en el folleto en inglés para familiarizarse con Las partes de ensamblaje.
ADVERTENCIA PASO 3 El uso de un televisor demasiado pesado o grande es peligroso. Un televisor demasiado pesado generará riesgo de caída, lo cual podría causar lesiones graves o muerte. Un televisor demasiado grande para el espacio disponible puede ser empujado o golpeado por accidente, causando que éste se salga del mueble o se caiga. • Verifique el tamaño y peso del televisor.
PASO 9 PASO 13 Fije cinco SOPORTES ANGULARES (5G) al FALDÓN GRANDE (R) como se muestra en el diagrama superior. Utilice cinco TORNILLOS MARRONES DE CABEZA GRANDE de 11 mm (6S). NOTA: Asegúrese que los bordes de los SOPORTES ANGULARES estén nivelados con los bordes del FALDÓN GRANDE. Posicione los EXTREMOS PEQUEÑOS (B y D) y los PARALES PEQUEÑOS (F2 y H2), como se muestra en los diagramas inferiores. Fije el FALDÓN GRANDE (R) al FONDO (J) y a los PARALES PEQUEÑOS (F2 y H2).
WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Children climbing on furniture. • A child may try to reach a toy or other object by climbing on furniture. • Children will play and be active near the TV. • Risk of injury or death.
ADVERTENCIA Por favor use el mobiliario correcta y seguramente. El mal uso puede causar riesgos de seguridad o daño a las unidades o artículos domésticos. Cuidadosamente lea la tabla a continuación. Esté alerto de: Puede ocurrir: Evitar el problema: • Los niños subiendo al mobiliario. • El niño que intenta a alcanzar un juego u otro objeto subiendo al mobiliario. • Los niños jugarán y estarán activos cerca del televisor. • Riesgo de lesiones o la muerte.
1-YEAR LIMITED WARRANTY 1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a period of one year from the date of purchase against defects in materials or workmanship of Sauder furniture components. As used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 2.
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the purchase and assembly process was a positive experience and you feel good about the furniture you just built. If you need assistance or want to learn more, please contact our award-winning, Ohio-based customer service team at 800-523-3987 or Sauder.com. Set a world record for speed? Feeling good about yourself? Nice. Get social with it on any of these quality share sites.
