sauder.com Smart stand for the idiot box. TV Stand Beginnings Collection | Model 413022 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. Prefer the phone? Call 1-800-523-3987. Share your journey! PLEASE READ AND KEEP FOR FUTURE REFERENCE. English pg 1-12 Français pg 13-14 Español pg 15-16 Lot # 386663 11/19/15 Purchased: __________________ Be sure to give us a ring before making any returns.
Table of Contents Part Identification Hardware Identification Assembly Steps Assembly Tools Required 3 No. 2 Phillips Screwdriver Tip Shown Actual Size 4 5-12 Hammer Français 13-14 Español 15-16 Safety 17-18 Warranty Not actual size Skip the power trip. This time. 19 ! WARNING Use of a TV that is too heavy or large is hazardous. A TV that is too heavy will create a risk of a tip-over that can cause severe injury or death.
Now you know our ABCs. Part Identification å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts. A TOP (1) B LONG BRACE (2) C BOTTOM (1) D SHORT BRACE (2) E RIGHT FRONT/LEFT REAR LEG (2) F LEFT FRONT/RIGHT REAR LEG (2) G STOP MOLDING (1) A G D B F B D E E C F www.sauder.
Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit. 1F HIDDEN CAM - 4 5F HIDDEN CONNECTOR - 10 2F 1L CAM DOWEL -4 WARNING LABEL - 1 WARNING Never use this furniture with a TV that is too large or too heavy. Severe injury or death can occur. The TV and furniture will be unstable and may tip. -The TV must less than 50 lbs. -The base of the TV must be able to sit completely on this shelf. Refer to instruction book for complete safety information.
Look for this icon. It means a video assembly tip is available at www.sauder.com/services/tips Step 1 å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. å Push four HIDDEN CAMS (1F) into the TOP (A). Then, insert the metal end of a CAM DOWEL (2F) into each HIDDEN CAM. Do not tighten the HIDDEN CAMS in this step. A Arrow Arrow 1F 2F www.sauder.com/services 413022 Insert the metal end of the CAM DOWEL into the HIDDEN CAM.
Step 2 Fasten the STOP MOLDING (G) to the TOP (A). Tighten four HIDDEN CAMS. S HI urfa DD ce EN wi CA th M S å G S ur fa ce w ith h ol es A Caution Risk of damage or injury. HIDDEN CAMS must be completely tightened. HIDDEN CAMS that are not completely tightened may loosen, and parts may separate. To completely tighten: Page 6 Start Tighten Arrow Maximum 210 degrees Arrow Minimum 190 degrees 413022 www.sauder.
Step 3 å Insert a CONNECTOR SCREW (8S) into each HIDDEN CONNECTOR (5F). 5F 8S Step 4 å Use your hammer to tap ten HIDDEN CONNECTORS (5F) with SCREWS into the BRACES (B and D). B B D D 5F (10 used) www.sauder.
Step 5 å Fasten the SHORT BRACES (D) to the LONG BRACES (B). Use four BLACK 1-7/8" FLAT HEAD SCREWS (2S). 2S BLACK 1-7/8" FLAT HEAD SCREW (4 used in this step) Sur D COface w NN ith ECT HID OR DE S N B EN IDD H ith e w ORS c a f T SurNNEC CO Sur f CO ace w NN itho ECT ut OR HIDD S EN B ut itho S w e R fac TO SurNNEC CO DEN HID D All CONNECTOR SCREWS should be pointing up. Page 8 413022 www.sauder.
Step 6 å å Flip the BRACES (B and D) over. Fasten the BRACES (B and D) to the TOP (A) and STOP MOLDING (G). Tighten ten HIDDEN CONNECTORS. How to use the HIDDEN CONNECTOR To fasten two parts together using the HIDDEN CONNECTORS, insert your screwdriver, at an angle, into the slot in the HIDDEN CONNECTOR. While pushing the screw into the hole of the adjoining part, turn the screwdriver clockwise to tighten.
Step 7 å Insert four METAL PINS (1R) into the LEFT FRONT/RIGHT REAR LEGS (F). å Fasten the LEFT FRONT/RIGHT REAR LEGS (F) to the SHORT BRACES (D) and BOTTOM (C). Use four BLACK 1-7/8” FLAT HEAD SCREWS (2S). å NOTE: Be sure the METAL PINS insert into the holes in the BOTTOM (C) and SHORT BRACES (D). å Fasten the LEFT FRONT/RIGHT REAR LEGS (F) to the LONG BRACES (B). Use four BLACK 1-1/8” PAN HEAD SCREWS (9S).
Step 8 å Insert four METAL PINS (1R) into the RIGHT FRONT/LEFT REAR LEGS (E). å Fasten the RIGHT FRONT/LEFT REAR LEGS (E) to the SHORT BRACES (D) and BOTTOM (C). Use four BLACK 1-7/8" FLAT HEAD SCREWS (2S). å NOTE: Be sure the METAL PINS insert into the holes in the BOTTOM (C) and SHORT BRACES (D). å Fasten the RIGHT FRONT/LEFT REAR LEGS (E) to the LONG BRACES (B). Use four BLACK 1-1/8" PAN HEAD SCREWS (9S).
Step 9 å å å Carefully stand your unit upright. å å å NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it. Center a SCREW COVER (20P) over the head of each SCREW and press firmly. Apply the WARNING LABEL (1L) to the TOP (A). You should be able to read the label when the TV is removed from the unit. When the TV is in place, it should hide the label. Peel off the backing and apply the label as shown in the diagram.
Modèle 413022 Utilisez les instructions d’assemblage en français avec les schémas étape par étape du manuel d’instruction en anglais. Chaque étape en français correspond à la même étape en anglais. La pièce devant être attachée à l’élément est représentée en gris sur les schémas de chaque étape pour plus de précision. Comparer la “Liste de pièces” ci-dessous avec la “PART IDENTIFICATION” du manuel en anglais pour vous familiariser avec les pièces avant l’assemblage.
AVERTISSEMENT ÉTAPE 5 L'utilisation d'un téléviseur trop lourd ou trop gros est dangereuse. Un téléviseur trop lourd créera un risque de basculement pouvant provoquer de graves blessures ou la mort. Un téléviseur trop gros pour l'espace disponible risque d'être accidentellement poussé ou de tomber du mobilier ou d'être sujet à basculer. Fixer les ENTRETOISES COURTES (D) sur les ENTRETOISES LONGUES (B). Utiliser quatre VIS TÊTE PLATE 48 mm NOIRES (2S). • Vérifier la taille et le poids du téléviseur.
Modelo 413022 Use estas instrucciones de ensamblaje en español junto con las figuras paso-a-paso provistas en el folleto inglés. Cada paso en español corresponde al mismo paso en inglés. Se destacan las figuras de cada paso con una tonalidad oscura para mostrar precisamente cual parte se debe montar a la unidad. Compare la “Lista de Part” abajo con la “Part Identification” en el folleto en inglés para familiarizarse con Las partes de ensamblaje.
ADVERTENCIA PASO 5 El uso de un televisor demasiado pesado o grande es peligroso. Un televisor demasiado pesado generará riesgo de caída, lo cual podría causar lesiones graves o muerte. Un televisor demasiado grande para el espacio disponible puede ser empujado o golpeado por accidente, causando que éste se salga del mueble o se caiga. Fije las RIOSTRAS CORTAS (D) a las RIOSTRAS LARGAS (B). Utilice cuatro TORNILLOS NEGROS DE CABEZA PERDIDA de 48 mm (2S). • Verifique el tamaño y peso del televisor.
WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Children climbing on furniture. • A child may try to reach a toy or other object by climbing on furniture. • Children will play and be active near the TV. • Risk of injury or death.
ADVERTENCIA Por favor use el mobiliario correcta y seguramente. El mal uso puede causar riesgos de seguridad o daño a las unidades o artículos domésticos. Cuidadosamente lea la tabla a continuación. Esté alerto de: Puede ocurrir: Evitar el problema: • Los niños subiendo al mobiliario. • El niño que intenta a alcanzar un juego u otro objeto subiendo al mobiliario. • Los niños jugarán y estarán activos cerca del televisor. • Riesgo de lesiones o la muerte.
1-YEAR LIMITED WARRANTY 1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a period of one year from the date of purchase against defects in materials or workmanship of Sauder furniture components. As used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 2.
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the purchase and assembly process was a positive experience and you feel good about the furniture you just built. If you need assistance or want to learn more, please contact our award-winning, Ohio-based customer service team at 800-523-3987 or Sauder.com. Set a world record for speed? Feeling good about yourself? Nice. Get social with it on any of these quality share sites.
