Instructions / Assembly

Step 12
å
Refer to the enlared diaram to identify the parts on the HINGES.
å
The DOORS may need some adjustments. Follow the text below
to make needed adjustments.
å
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal), turn the
adjustin screw in or out.
å
To adjust the DOORS up and down (vertical), loosen both vertical
adjustment screws. Move the DOORS up or down to the desired
location. Tihten the screws after makin adjustments.
å
To adjust the DOORS in or out (depth), loosen the mountin screw
one turn and move the DOORS in or out, as needed. Tihten the
mountin screw after makin adjustments.
412921 www.sauder.com/servicesPae 16
Adjustin screw (horizontal)
Mountin screw (depth)
(vertical adjustment)