sauder.com The stories of your life. 3-Shelf Bookcase Model 411815 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. Prefer the phone? Call 1-800-523-3987. Share your journey! PLEASE READ AND KEEP FOR FUTURE REFERENCE. English pg 1-11 Français pg 12-13 Español pg 14-16 Lot # 359957 03/10/14 Purchased: __________________ Be sure to give us a ring before making any returns.
Table of Contents Part Identification Hardware Identification Assembly Steps Assembly Tools Required 3 No. 2 Phillips Screwdriver Tip Shown Actual Size 4 5-11 Hammer Français 12-13 Español 14-16 Safety 17-18 Warranty Page 2 Not actual size Skip the power trip. This time. 19 411815 www.sauder.
Now you know our ABCs. Part Identification å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts. A RIGHT END (1) E ADJUSTABLE SHELF (2) I BASE MOLDING (1) B LEFT END (1) F BACK (1) J END MOLDING (2) C TOP (1) G TOP MOLDING (1) D BOTTOM (1) H SHELF MOLDING (2) C G F J H B H E E J A D I www.sauder.
Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit. K ANGLE BRACKET - 5 L2 N METAL PIN - 8 O RUBBER SLEEVE - 8 Q HOLE PLUG - 3 Page 4 S BLACK 1-1/8" PAN HEAD SCREW - 3 U NAIL - 32 M2 CAM DOWEL - 8 HIDDEN CAM - 8 R T 411815 P CAM COVER - 4 TACK GLIDE - 4 BLACK 9/16" LARGE HEAD SCREW - 10 www.sauder.
Look for this icon. It means a video assembly tip is available at www.sauder.com/services/tips Step 1 å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. å Push eight HIDDEN CAMS (L2) into the ENDS (A and B) and BOTTOM (D). Then insert the metal end of a CAM DOWEL (M2) into each HIDDEN CAM. M2 Arrow Do not tighten the HIDDEN CAMS in this step. (8 used) L2 D B A Arrow Arrow L2 M2 Insert the metal end of the CAM DOWEL into the HIDDEN CAM.
Step 2 å Fasten the TOP (C) and BOTTOM (D) to the ENDS (A and B). Tighten eight HIDDEN CAMS. å With a hammer, gently tap four TACK GLIDES (R) into the bottom edges of the ENDS (A and B). Caution Do not stand the unit upright without the BACK fastened. The unit may collapse. These holes must be here. Notched edge These holes must be here.
Step 3 å Fasten the TOP MOLDING (G) to the TOP (C). Use three BLACK 1-1/8" PAN HEAD SCREWS (S). å å NOTE: Do not overtighten the SCREWS into the TOP. Push three HOLE PLUGS (Q) into the TOP MOLDING (G). S BLACK 1-1/8" PAN HEAD SCREW (3 used in this step) Curved edge Q G C www.sauder.
Step 4 å Slide the END MOLDINGS* (J) onto the notched edges of the ENDS (A and B). å *U.S. Patent No. 5,499,886 Notched edge Notched edge Slide the END MOLDINGS (J) onto the notched edges. A B Page 8 J J 411815 www.sauder.
Step 5 å Carefully turn your unit over onto its front edges. Unfold the BACK (F) and lay it over your unit. å Make equal margins along the edges of the BACK (F). Push on opposite corners of your unit if needed to make it "square". å å Fasten the BACK (F) to your unit using the NAILS (U). å Fasten the BASE MOLDING (I) to the ENDS (A and B) and BOTTOM (D). Use five BLACK 9/16" LARGE HEAD SCREWS (T). Caution Do not stand the unit upright without the BACK fastened. The unit may collapse.
Step 6 å å å Slide a SHELF MOLDING* (H) onto the ADJUSTABLE SHELF (E). Repeat this step for the other ADJUSTABLE SHELF. *U.S. Patent No. 5,499,886 These surfaces are not even. E H Slide the SHELF MOLDING (H) onto the notched edge. Notched edge Page 10 411815 www.sauder.
Step 7 å å Carefully stand your unit upright. å å å Push four CAM COVERS (P) into the HIDDEN CAMS on the ENDS (A and B). Push the RUBBER SLEEVES (O) over the METAL PINS (N). Insert the METAL PINS into the hole locations of your choice in the ENDS (A and B). Set the ADJUSTABLE SHELVES (E) onto the METAL PINS. NOTE: Please read the back pages of the instruction booklet for important safety information. This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
Modèle 411815 Utilisez les instructions d’assemblage en français avec les schémas étape par étape du manuel d’instruction en anglais. Chaque étape en français correspond à la même étape en anglais. La pièce devant être attachée à l’élément est représentée en gris sur les schémas de chaque étape pour plus de précision. Comparer la “Liste de pièces” ci-dessous avec la “PART IDENTIFICATION” du manuel en anglais pour vous familiariser avec les pièces avant l’assemblage.
ÉTAPE 1 ÉTAPE 5 Ne pas serrer les EXCENTRIQUES ESCAMOTABLES dans cette étape. Attention: Ne pas relever l’élément dans sa position verticale avant d’avoir fixé l’ARRIÈRE. L’élément risque de s’effondrer. Assembler l’élément sur un sol à moquette ou sur le carton vide pour éviter d’endommager l’élément ou le sol. Avec précaution, retourner l’élément sur ses chants avant. Déplier l’ARRIÈRE (F) et le placer sur l’élément.
Modelo 411815 Use estas instrucciones de ensamblaje en español junto con las figuras paso-a-paso provistas en el folleto inglés. Cada paso en español corresponde al mismo paso en inglés. Se destacan las figuras de cada paso con una tonalidad oscura para mostrar precisamente cual parte se debe montar a la unidad. Compare la “Lista de Part” abajo con la “Part Identification” en el folleto en inglés para familiarizarse con Las partes de ensamblaje.
PASO 1 PASO 3 No apriete los EXCÉNTRICOS ESCONDIDOS en este paso. Fije la MOLDURA DE PANEL SUPERIOR (G) al PANEL SUPERIOR (C). Utilice tres TORNILLOS NEGROS DE CABEZA REDONDA de 28 mm (S). Ensamble la unidad sobre un piso alfombrado o sobre el cartón vacío para evitar rayar la unidad o el piso. Empuje ocho EXCÉNTRICOS ESCONDIDOS (L2) dentro de los EXTREMOS (A y B) y del FONDO (D). A continuación, inserte un PASADOR DE EXCÉNTRICO (M2) dentro de cada EXCÉNTRICO ESCONDIDO.
PASO 5 PASO 6 Precaución: No coloque la unidad en posición vertical hasta que se fije el DORSO. La unidad podría caerse. Deslice la MOLDURA DE ESTANTE (H) sobre el ESTANTE AJUSTABLE (E). Cuidadosamente voltee la unidad para que repose sobre los bordes delanteros. Desdoble el DORSO (F) y colóquelo sobre la unidad. Repita este paso para el otro ESTANTE AJUSTABLE. Los margenes a lo largo de los bordes del DORSO (F) deben ser iguales.
WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded shelves. • Improper loading can cause the product to be top-heavy. • Risk of injury. • Top-heavy furniture can tip over. • Overloaded shelves can break. • Never exceed the weight limits shown in the instructions.
ADVERTENCIA Por favor use el mobiliario correcta y seguramente. El mal uso puede causar riesgos de seguridad o daño a las unidades o artículos domésticos. Cuidadosamente lea la tabla a continuación. Esté alerto de: Puede ocurrir: Evitar el problema: • Estantes sobrecargados • Cargar el producto inadecuadamente puede causar la inestabilidad. • Riesgo de lesiones. • El mobiliario inestable puede volcarse. • Estantes sobrecargados pueden romper.
5-YEAR LIMITED WARRANTY 1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a period of five years from the date of purchase against defects in materials or workmanship of Sauder furniture components. As used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 2.
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the purchase and assembly process was a positive experience and you feel good about the furniture you just built. If you need assistance or want to learn more, please contact our award-winning, Ohio-based customer service team at 800-523-3987 or Sauder.com. Set a world record for speed? Feeling good about yourself? Nice. Get social with it on any of these quality share sites.
