Instructions / Assembly

Step 10
411312www.sauder.com/services
Page 15
å
Refer to the enlarged diagram to identify the parts on the HINGES.
å
The DOORS may need some adjustments. Follow the text below to make
needed adjustments.
å
DOOR ADJUSTMENTS:
To adjust the DOORS from side to side (horizontal), loosen the mounting screw
several turns, then turn the adjusting screw in or out. Tighten the mounting
screw after making adjustments.
å
To adjust the DOORS up and down (vertical), loosen both vertical adjustment
screws. Move the DOORS up or down to the desired location. Tighten the screws
after making adjustments.
å
To adjust the DOORS in or out (depth), loosen the mounting screw one turn
and move the DOORS in or out, as needed. Tighten the mounting screw after
making adjustments.
Adjusting screw (horizontal)
Mounting screw (depth)
(vertical adjustment)