Assembly Instructions

Step Step 13
411312 www.sauder.com/servicesPage 18
VIEW THE T-SLOT BOX VIDEO
1
3
2
4
Push down
å
Pull the DRAWER FRONT BRACKETS (9G) apart and slide them
into the grooves in the DRAWER SIDES (D50 and D51). You may
need to gently tap them in with a hammer.
å
NOTE: The DRAWER FRONT BRACKETS are marked "RH" and
"LH" for easy identifi cation.
å
Fasten the DRAWER FRONT (L) to the DRAWER FRONT
BRACKETS (9G). Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
å
Slide the DRAWER BOTTOM (D983) into the grooves in the
DRAWER SIDES (D50 and D51) and DRAWER FRONT (L).
å
Fasten the DRAWER BRACE (M65) to the DRAWER
FRONT (L). Tighten one HIDDEN CAM.
å
Fasten the DRAWER BACK (D175) to the DRAWER
SIDES (D50 and D51) and DRAWER BRACE (M65).
Use fi ve BLACK 1-9/16" FLAT HEAD SCREWS (30S).
BLACK 9/16" LARGE HEAD SCREW
(4 used in this step)
1S
D983
D175
L
L
M65
M65
L
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
30S
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(5 used in this step)
1
2
Unfi nished surface
Surface with
HIDDEN CAM
D50
D50
D50
D51
D51
D51
9G
Hidden part using
recycled material.
Color may vary.