sauder.com WARNING CHOKING HAZARD - Small Parts Not for children under 3 years. Adult assembly required. Dresser Shoal Creek Collection | 410287 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. Prefer the phone? Call 1-800-523-3987. Share your journey! PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Table of Contents Part Identification Hardware Identification Assembly Steps Assembly Tools Required 2-3 No. 2 Phillips Screwdriver Tip Shown Actual Size 4-5 6-22 Hammer Français 23-25 Español 26-28 Safety 29-30 Warranty Not actual size Skip the power trip. This time. 31 Part Identification å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other.
Now you know our ABCs. Part Identification D I A F J G C E E B I D10 D166 SS H D975 J K2 D11 D10 D166 M65 D975 L2 D11 D132 D167 M65 D975 D138 M65 D132 D167 Q2 D975 D138 R2 M65 www.sauder.
Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit. 40CA CABINET RIGHT - 6 AA2 EE 40CC DRAWER RIGHT - 6 40CB CABINET LEFT - 6 HIDDEN CAM - 22 PULL- 8 HH SLIDE CAM - 12 BB2 CAM SCREW - 12 40CD DRAWER LEFT - 6 CC2 CAM DOWEL - 10 FF KNOB- 4 GG METAL PIN - 4 JJ WARNING LABEL - 1 TT FOOT - 1 WARNING Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over: • Place heaviest items in the lowest drawers.
Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit. KK LL BLACK 1-7/8" FLAT HEAD SCREW - 3 MM BLACK 1-1/8" MACHINE SCREW - 4 NN SILVER 3/4" MACHINE SCREW - 16 OO BLACK 9/16" FLAT HEAD SCREW - 4 QQ GOLD 5/16" FLAT HEAD SCREW - 48 RR NAIL - 47 VV XX BLACK 9/16" LARGE HEAD SCREW - 1 30S BLACK 1-9/16" FLAT HEAD SCREW - 30 BLACK 2-1/4" FLAT HEAD SCREW - 6 www.sauder.
Look for this icon. It means a video assembly tip is available at www.sauder.com/services/tips Step 1 å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. å Push twenty-two HIDDEN CAMS (AA2) into the ENDS (A and B), UPRIGHT (C), BOTTOMS (E), and DRAWER BRACES (M65). Then, insert the metal end of ten CAM DOWELS (CC2) into the HIDDEN CAMS. Scan this QR code or go to this address: http://qr.sauder.
Step 2 å Turn twelve CAM SCREWS (BB2) into the FRONT LEGS (G and H) and DRAWER FRONTS (K2, L2, Q2, and R2). BB2 (12 used) H G R2 R2 Q2 Q2 L2 K2 www.sauder.
Step 3 å Fasten the REAR LEGS (I) to the ENDS (A and B). Use six BLACK 2-1/4" FLAT HEAD SCREWS (KK). Remember: Righty tighty. Lefty loosey. KK S HI urfa DD ce EN wi CA tho M ut S BLACK 2-1/4" FLAT HEAD SCREW (6 used in this step) B S HI urfa DD ce EN wi CA tho M ut S I These holes must be here. I A Angled edge These holes must be here. Page 8 410287 www.sauder.
Step 4 Turn four BLACK 9/16" FLAT HEAD SCREWS (OO) into the ENDS (A and B) until the shoulders of the SCREWS rest on the surfaces of the ENDS. å Slide the END MOLDINGS (J) onto the ENDS (A and B). Line up the grooves in the MOLDINGS over the heads of the SCREWS in the ENDS. S HI urfa DD ce EN wi CA tho M ut S S HI urfa DD ce EN wi CA tho M ut S å J B A Shoulder J OO BLACK 9/16" FLAT HEAD SCREW (4 used in this step) www.sauder.
Step 5 Fasten the FRONT LEGS (G and H) to the ENDS (A and B). Tighten six HIDDEN CAMS. S HI urfa DD ce EN wi CA th M S å B S HI urfa DD ce EN wi CA th M S H G A Angled edge 1 2 Page 10 410287 www.sauder.
Step 6 å Fasten three CABINET RIGHTS (40CA) to the RIGHT END (A) and three CABINET LEFTS (40CB) to the LEFT END (B). Use twelve GOLD 5/16" FLAT HEAD SCREWS (QQ) through holes #1 and #4. QQ GOLD 5/16" FLAT HEAD SCREW (12 used in this step) Roller end 1 2 3 1 4 2 3 1 4 2 A 4 3 4 3 G 2 4 1 3 2 4 1 3 B 2 1 H Roller end www.sauder.
Step 7 å Fasten three CABINET RIGHTS (40CA) and three CABINET LEFTS (40CB) to the UPRIGHT (C). Use twelve GOLD 5/16" FLAT HEAD SCREWS (QQ) through holes #1 and #4. QQ GOLD 5/16" FLAT HEAD SCREW (12 used in this step) Roller end 1 2 3 1 4 S HI urfa DD ce EN wi CA th M S 2 3 1 4 2 C Unfinished edge 3 4 3 4 3 1 4 2 3 4 Page 12 410287 www.sauder.
Step 8 å Fasten the LEFT END (B) and UPRIGHT (C) to the TOP (D). Tighten four HIDDEN CAMS. Caution Do not stand the unit upright without the BACK fastened. The unit may collapse. Finished edge D H B e fac r u S withDEN HID S M CA C Caution Risk of damage or injury. HIDDEN CAMS must be completely tightened. HIDDEN CAMS that are not completely tightened may loosen, and parts may separate. To completely tighten: www.sauder.
Step 9 å å Insert four METAL PINS (GG) into the BOTTOMS (E). å Fasten the BOTTOMS (E) to the LEFT END (B). Tighten two HIDDEN CAMS. å Fasten the BOTTOMS (E) to the UPRIGHT (C). Use two BLACK 1-7/8" FLAT HEAD SCREWS (LL). Now might be a good time to refresh your drink. Insert the METAL PINS (GG) in one end of the BOTTOMS (E) into the holes in the LEFT END (B).
Step 10 å Fasten the RIGHT END (A) to the TOP (D) and BOTTOMS (E). Tighten four HIDDEN CAMS. å NOTE: Be sure the METAL PINS in the BOTTOMS insert into the holes in the RIGHT END. å Fasten the BRACE (SS) and FOOT BASE (UU) to the BOTTOM (E). Use four BLACK 1-1/4" FLAT HEADSCREWS (VV) through the BASE, through the BRACE, and into the BOTTOM. Then, push the FOOT (TT) into the FOOT BASE (UU). å NOTE: Turn the screw end of the FOOT completely in.
Step 11 å Carefully turn your unit over onto its front edges. Unfold the BACK (F) and lay it over your unit. å Make equal margins along all four edges of the BACK (F). Push on opposite corners of your unit if needed to make it "square". å å Fasten the BACK (F) to your unit using the NAILS (RR). Caution Do not stand the unit upright without the BACK fastened. The unit may collapse. NOTE: Be sure to tap NAILS into the holes that line up over the UPRIGHT (C).
Step 12 VIEW THE T-LOCK BOX VIDEO The tabs should insert freely into the slots. Gently tilt the DRAWER SIDES side to side until the tabs slip into the slots. 1 With the palm of your hand, tap the DRAWER BOTTOM down into the groove. 2 Un fi su nish rfa ed ce D132 D975 D132 D138 Q2 D138 Q2 Groove Be sure the DRAWER BOTTOM inserts into the DRAWER FRONT groove. Insert the DRAWER SIDES (D132 and D138) at an angle into the slot at each end of the RIGHT DRAWER FRONT (Q2).
Step 13 å å Insert a SLIDE CAM (HH) into the SMALL DRAWER SIDES (D10 and D11). å NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE. å Repeat this step for the other drawers. Fasten the DRAWER RIGHT (40CC) and DRAWER LEFT (40CD) to the SMALL DRAWER SIDES (D10 and D11). Use four GOLD 5/16" FLAT HEAD SCREWS (QQ) through holes #1 and #4.
Step 14 å Fasten two KNOBS (FF) to the SMALL RIGHT DRAWER FRONT (K2). Use two BLACK 1-1/8" MACHINE SCREWS (MM). å Fasten two PULLS (EE) to the RIGHT DRAWER FRONT (Q2). Use four SILVER 3/4" MACHINE SCREWS (NN). å Repeat this step for the other drawers. Want options? Customize your item with add-on hardware kits available on sauder.com. MM BLACK 1-1/8" MACHINE SCREW (4 used in this step) K2 NN SILVER 3/4" MACHINE SCREW (16 used in this step) FF Q2 EE www.sauder.
Step 15 å å Carefully stand your unit upright. å To insert the drawers into your unit, tip the front of the drawers down and drop the rollers on the drawers behind the rollers on the unit. Lift the front of the drawers up and slide them into the unit. å Apply the WARNING LABEL (JJ) to the upper LEFT DRAWER SIDE (D11). You should be able to read the label when the drawer is open. When the drawer is closed, it will hide the label. Peel off the backing and apply the label as shown in the diagram.
Step 16 å We recommend using the SAFETY BRACKET (WW) for added stability. Use a BLACK 9/16" LARGE HEAD SCREW (XX) into the top of the unit and a BLACK 1-7/8" FLAT HEAD SCREW (LL) into a stud in your wall. BLACK 1-7/8" FLAT HEAD SCREW (1 used into a stud in your wall) LL WW BLACK 9/16" LARGE HEAD SCREW (1 used into the top of your unit) XX 40 lbs. 20 lbs. 20 lbs. 35 lbs. www.sauder.
Step 17 å To make adjustments to the drawers, loosen SCREW #4 in the SLIDES a 1/4 turn, then turn the cam clockwise or counter-clockwise. Notice how the drawer raises or lowers as you turn the cam. By adjusting the drawers this way, it will help the DRAWER FRONTS line up better when closed. Tighten the SCREWS when finished with adjustments. å å NOTE: Please read the back pages of the instruction booklet for important safety information. This completes assembly.
410287 Utilisez les instructions d’assemblage en français avec les schémas étape par étape du manuel d’instruction en anglais. Chaque étape en français correspond à la même étape en anglais. La pièce devant être attachée à l’élément est représentée en gris sur les schémas de chaque étape pour plus de précision. Comparer la “Liste de pièces” ci-dessous avec la “PART IDENTIFICATION” du manuel en anglais pour vous familiariser avec les pièces avant l’assemblage.
ÉTAPE 1 ÉTAPE 7 Ne pas serrer les EXCENTRIQUES ESCAMOTABLES à cette étape. Fixer trois ÉLÉMENTS DROITE (40CA) et trois ÉLÉMENTS GAUCHE (40CB) au MONTANT (C). Utiliser douze VIS DORÉES TÊTE PLATE 8 mm (QQ). Assembler l’élément sur un sol à moquette ou sur le carton vide pour éviter d’endommager l’élément ou le sol. Enfoncer vingt-deux EXCENTRIQUES ESCAMOTABLES (AA2) dans les EXTRÉMITÉS (A et B), le MONTANT (C), les DESSOUS (E) et les ENTRETOISES DE TIROIR (M65).
ÉTAPE 1 ÉTAPE 14 Ne pas relever l’élément dans sa position verticale avant d’avoir fixé l’ARRIÈRE. L’élément risque de s’effondrer. Fixer deux BOUTONS (FF) au DEVANT DROIT DE PETIT TIROIR (K2). Utiliser deux VIS NOIRES À MÉTAUX 28 mm (MM). Avec précaution, retourner l’élément sur ses chants avant. Déplier l’ARRIÈRE (F) et le placer sur l’élément. Fixer deux POIGNÉES (EE) au DEVANT DROIT DE TIROIR (Q2). Utiliser quatre VIS ARGENTÉES À MÉTAUX 19 mm (NN).
410287 Use estas instrucciones de ensamblaje en español junto con las figuras paso-a-paso provistas en el folleto inglés. Cada paso en español corresponde al mismo paso en inglés. Se destacan las figuras de cada paso con una tonalidad oscura para mostrar precisamente cual parte se debe montar a la unidad. Compare la “Lista de Part” abajo con la “Part Identification” en el folleto en inglés para familiarizarse con Las partes de ensamblaje.
PASO 1 PASO 7 No apriete los EXCÉNTRICOS ESCONDIDOS en este paso. Fije tres GABINETES DERECHO (40CA) y tres GABINETES IZQUIERDO (40CB) al PARAL (C)). Utilice doce TORNILLOS DORADOS DE CABEZA PERDIDA de 8 mm (QQ). Ensamble la unidad sobre un piso alfombrado o sobre el cartón vacío para evitar rayar la unidad o el piso. Empuje veintidós EXCÉNTRICOS ESCONDIDOS (AA2) dentro de los EXTREMOS (A y B), del PARAL (C), de los FONDOS (E) y de las RIOSTRAS DE CAJÓN (M65).
PASO 11 PASO 14 No coloque la unidad en posición vertical hasta que se fije el DORSO. La unidad podría caerse. Fije dos MANILLAS (FF) a la CARA DERECHA DE CAJÓN PEQUEÑO (K2). Utilice dos TORNILLOS NEGROS PARA METAL de 28 mm (MM). Cuidadosamente voltee la unidad para que repose sobre los bordes delanteros. Desdoble el DORSO (F) y colóquelo sobre la unidad. Fije el DORSO (F) de manera que los márgenes son iguales a lo largo de los cuatro bordes.
WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded dresser drawers and shelves. • Risk of injury. • Top-heavy furniture can tip over. • Overloaded drawers and shelves can break. • Never exceed the weight limits shown in the instructions. • Work from the bottom to the top when loading shelves and drawers.
ADVERTENCIA Por favor use el mobiliario correcta y seguramente. El mal uso puede causar riesgos de seguridad o daño a las unidades o artículos domésticos. Cuidadosamente lea la tabla a continuación. Esté alerto de: Puede ocurrir: Evitar el problema: • Cajones y estantes de cómoda sobrecargados. • Riesgo de lesiones. • El mobiliario inestable puede volcarse. • Los cajones y estantes sobrecargados pueden romperse. • Nunca exceda los límites de peso indicados en las instrucciones.
5-YEAR LIMITED WARRANTY 1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a period of five years from the date of purchase against defects in materials or workmanship of Sauder furniture components. As used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 2.
Dear Valued Customer: Thanks so much for choosing Sauder® furniture. I hope the purchase and assembly process was a positive experience and you feel good about the furniture you just built. If you need assistance or want to learn more, please contact our award-winning, Ohio-based customer service team at 800-523-3987 or Sauder.com. My grandfather, Erie Sauder, founded the company in 1934 and later invented and patented the first commercially successful ready-to-assemble tables.
