Instructions / Assembly

Step 14
409934www.sauder.com/services
Pae 19
VIEW THE T-LOCK BOX VIDEO
å
Insert the DRAWER SIDES (D26 and D27) at
an angle into the slot at each end of the
DRAWER FRONT (K).
å
Slide the DRAWER BOTTOM (D981) into the grooves
in the DRAWER SIDES (D26 and D27) and
DRAWER FRONT (K).
å
Fasten the DRAWER BRACE (Q2) to the DRAWER
FRONT (K). Tighten one HIDDEN CAM.
å
Fasten the DRAWER BACK (D174) to the DRAWER
SIDES (D26 and D27) and DRAWER BRACE (Q2). Use
five BLACK 1-9/16" FLAT HEAD SCREWS (30S).
The tabs should insert freely into the
slots. Gently tilt the DRAWER SIDES side
to side until the tabs slip into the slots.
Surface with
HIDDEN CAM
12
34
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT roove.
With the palm of your hand, tap the
DRAWER BOTTOM down into the roove.
Groove
Arrow
Maximum
210 derees
Minimum
190 derees
Start each screw a few turns before
completely tihtenin any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(5 used in this step)
30S
K
Q2
K
Q2
Unfi nished
surface
D27
D27
D27
D26
D26
D26
K
D981
D174