Instructions / Assembly

Step 13
409934 www.sauder.com/servicesPae 18
å
Refer to the enlared diaram to identify the parts on the HINGES.
å
The DOORS may need some adjustments. Follow the text below to make needed adjustments.
å
DOOR ADJUSTMENTS:
To adjust the DOORS from side to side (horizontal), loosen the mountin screw several turns, then turn the adjustin screw in or
out. Tihten the mountin screw after makin adjustments.
å
To adjust the DOORS up and down (vertical), loosen both vertical adjustment screws. Move the DOORS up or down to the desired
location. Tihten the screws after makin adjustments.
å
To adjust the DOORS in or out (depth), loosen the mountin screw one turn and move the DOORS in or out, as needed.
Tihten the mountin screw after makin adjustments.
Adjustin screw (horizontal)
Mountin screw (depth)
(vertical adjustment)