sauder.com The original desktop. Desk Shoal Creek Collection | 409733 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. Prefer the phone? Call 1-800-523-3987. Share your journey! PLEASE READ AND KEEP FOR FUTURE REFERENCE. English pg 1-25 Français pg 26-28 Español pg 29-32 Lot # 367265 11/24/14 Purchased: __________________ Be sure to give us a ring before making any returns.
Table of Contents Part Identification Assembly Tools Required 2-3 Hardware Identification No. 2 Phillips Screwdriver Tip Shown Actual Size 4 Assembly Steps 5-24 Hammer Français 25-28 Español 29-32 Safety 33-34 Warranty Not actual size 35 Part Identification å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Part Identification Y3 CC BB2 AA3 Z3 D2 H A2 G X F2 E2 C2 G D77 D30 EE B2 D716 D31 W H N X D83 D121 D726 D84 DDD I D78 D14 D716 D15 S2 www.sauder.
Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit.
Look for this icon. It means a video assembly tip is available at www.sauder.com/services/tips Step 1 å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. å Push thirty-five HIDDEN CAMS (II2) into the ENDS (A2 and B2), UPRIGHT (C2), BOTTOM (E2), MODESTY PANEL (F2), HUTCH SHELF (BB2), HUTCH BACK (CC) and DRAWER BRACE (DDD).
Step 2 å Turn thirteen CAM SCREWS (JJ2) into the LEGS (G and H) and PENCIL DRAWER FRONT (I). JJ2 (13 used) I G H G H Page 6 409733 www.sauder.
Step 3 å Turn four BLACK 9/16" FLAT HEAD SCREWS (AAA) into the ENDS (A2 and B2) until the shoulder of the SCREWS rest on the surface of the ENDS. å Slide the END MOLDINGS (X) onto the ENDS (A2 and B2). Line up the grooves in the MOLDINGS over the heads of the SCREWS in the ENDS. These edges should be even. Edge with HIDDEN CAMS S HI urfa DD ce EN w i CA tho M ut S X S HI urfa DD ce EN w i CA tho M ut S A2 B2 X These edges should be even.
Step 4 å Fasten the LEGS (G and H) to the ENDS (A2 and B2). Tighten twelve HIDDEN CAMS. These surfaces should be even. These surfaces should be even. S HI urfa DD ce EN w i CA th M S A2 S HI urfa DD ce EN w i CA th M S B2 G G H H Angled edge Angled edge 1 Page 8 2 409733 www.sauder.
Step 5 å Fasten the CABINET RIGHTS (40CA) and CABINET LEFTS (40CB) to the ENDS (A2 and B2) and UPRIGHT (C2). Use twelve GOLD 5/16" FLAT HEAD SCREWS (BBB) through holes #1 and #3. Roller end These holes must be here.
Step 6 å Fasten the HUTCH LEFT END (Z3) to the HUTCH BACK (CC). Tighten two HIDDEN CAMS. Angled edge Z3 CC Finished edge MS CA N DE e fac Sur Caution Risk of damage or injury. HIDDEN CAMS must be completely tightened. HIDDEN CAMS that are not completely tightened may loosen, and parts may separate. To completely tighten: Page 10 with HID Start Tighten Arrow Maximum 210 degrees Arrow Minimum 190 degrees 409733 www.sauder.
Step 7 å Insert one METAL PIN (LL) into the hole in the short edge of the HUTCH SHELF (BB2). å Fasten the HUTCH SHELF (BB2) to the HUTCH LEFT END (Z3). Tighten the HIDDEN CAM. å NOTE: Be sure the METAL PIN in the HUTCH SHELF inserts into the hole in the HUTCH LEFT END. Angled edge Z3 CC BB2 Sur HIDface w DEN ith CA MS LL Maximum 210 degrees Finished edge Arrow Minimum 190 degrees www.sauder.
Step 8 å Insert one METAL PIN (LL) into the hole in the short edge of the HUTCH SHELF (BB2). å Fasten the HUTCH SHELF (BB2) to the HUTCH RIGHT END (Y3). Tighten the HIDDEN CAM. å NOTE: Be sure the METAL PIN in the HUTCH SHELF inserts into the hole in the HUTCH RIGHT END. å Turn the HUTCH assembly over onto its front edge and fasten the HUTCH RIGHT END (Y3) to the HUTCH BACK (CC). Tighten two HIDDEN CAMS.
Step 9 å Fasten the TOP (D2) to the HUTCH UPRIGHT (AA3). Use two BLACK 1-7/8" FLAT HEAD SCREWS (UU). å Fasten the TOP (D2) to the HUTCH BACK (CC). Use four BLACK 1-7/8" FLAT HEAD SCREWS (UU). Finished edge Finished edge Sur fac ew ith mo re h ole s AA3 D2 Be sure the head of this SCREW is flat against the TOP. UU BLACK 1-7/8" FLAT HEAD SCREW (6 used in this step) UU Finished edge CC D2 UU www.sauder.
Step 10 å Fasten the LEFT END (B2) to the TOP (D2). Tighten two HIDDEN CAMS. ith e w AMS c a f Sur DEN C D HI Roller end B2 ce rfa Su th wi e or m s le ho Maximum 210 degrees D2 For support, place packing foam and magazines here. Arrow Minimum 190 degrees Page 14 409733 www.sauder.
Step 11 å Fasten the MODESTY PANEL (F2) to the LEFT END (B2). Tighten three HIDDEN CAMS. B2 Flat edge Sur HIDface w DEN ith CA MS F2 Maximum 210 degrees Arrow Minimum 190 degrees www.sauder.
Step 12 å Fasten the RIGHT END (A2) to the TOP (D2). Tighten two HIDDEN CAMS. å Fasten the MODESTY PANEL (F2) to the RIGHT END (A2). Tighten three HIDDEN CAMS. å Fasten the BOTTOM (E2) to the RIGHT END (A2). Tighten two HIDDEN CAMS. th S wi AM ce C rfa EN Su IDD H These holes should be here. E2 A2 withMS e c fa A Sur DEN C HID F2 D2 Maximum 210 degrees Arrow Minimum 190 degrees Page 16 409733 www.sauder.
Step 13 å Fasten the UPRIGHT (C2) to the TOP (D2) and BOTTOM (E2). Tighten four HIDDEN CAMS. å Fasten the MODESTY PANEL (F2) to the UPRIGHT (C2). Use three BLACK 1-7/8" FLAT HEAD SCREWS (UU). UU BLACK 1-7/8" FLAT HEAD SCREW (3 used for the MODESTY PANEL) E2 ith e w AMS c a f Sur DEN C D HI C2 D2 Finished edge Maximum 210 degrees F2 Arrow Minimum 190 degrees www.sauder.
Step 14 å Fasten the FOOT EXTENSION BLOCK (EE) to the BOTTOM (E2). Use four SILVER 1-1/8" FLAT HEAD SCREWS (10S). å Fasten the FOOT BASE (24E) to the FOOT EXTENSION BLOCK (EE). Use four SILVER 5/8" FLAT HEAD SCREWS (23S). å å Push the ADJUSTABLE FOOT (25E) into the FOOT BASE (24E). Turn the adjustable end of the ADJUSTABLE FOOT completely in. Final adjustments will be made after the unit is standing upright. 23S Turn completely in.
Step 15 VIEW THE T-LOCK BOX VIDEO The tabs should insert freely into the slots. Gently tilt the DRAWER SIDES side to side until the tabs slip into the slots. 1 With the palm of your hand, tap the DRAWER BOTTOM down into the groove. 2 D83 D83 Un fin ish ed su rfa ce D726 I I D84 D84 Groove Be sure the DRAWER BOTTOM inserts into the DRAWER FRONT groove. Insert the PENCIL DRAWER SIDES (D83 and D84) at an angle into the slot at each end of the PENCIL DRAWER FRONT (I).
Step 16 VIEW THE T-LOCK BOX VIDEO 1 2 The tabs should insert freely into the slots. Gently tilt the DRAWER SIDES side to side until the tabs slip into the slots. With the palm of your hand, tap the DRAWER BOTTOM down into the groove. Un fi su nish rfa ed ce D716 D30 D30 D31 D31 W W Groove å Be sure the DRAWER BOTTOM inserts into the DRAWER FRONT groove. Insert the DRAWER SIDES (D30 and D31) at an angle into the slot at each end of the DRAWER BOX FRONT (W).
Step 17 å å Insert a SLIDE CAM (MM) into the DRAWER SIDES (D83 and D84). Fasten the DRAWER RIGHT (40CC) and DRAWER LEFT (40CD) to the DRAWER SIDES (D83 and D84). Use four GOLD 5/16" FLAT HEAD SCREWS (BBB) through holes #2 and #4. å NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE. å Repeat this step for the other drawers. Roller end Screw head - turn CAM to line up holes in SLIDES with holes in DRAWER SIDES.
Step 18 å Fasten a PULL (OO) to the LARGE DRAWER FRONT (S2) as shown in the upper diagram below. Use two SILVER 5/8" MACHINE SCREWS (YY). å å Slide a FILE GLIDE (TT) onto the top edge of the LARGE DRAWER SIDES (D14 and D15). Fasten the KNOB (SS) to the PENCIL DRAWER FRONT (I) as shown in the lower diagram below. Use a BLACK 7/8" MACHINE SCREW (WW). YY SILVER 5/8" MACHINE SCREW (2 used for the PULLS) TT D15 TT D14 S2 OO WW BLACK 7/8" MACHINE SCREW (1 used for the KNOB) SS I Page 22 409733 www.
Step 19 å First, fasten two PULLS (OO) to the DRAWER FRONT (N). Use four SILVER 5/8" MACHINE SCREWS (YY). å Then, fasten the DRAWER FRONT (N) to the DRAWER BOX FRONT (W). Use four BLACK 1-1/8" PAN HEAD SCREWS (VV). VV BLACK 1-1/8" PAN HEAD SCREW (4 used for the DRAWER FRONT) YY SILVER 5/8" MACHINE SCREW (4 used for the PULLS) W N OO Fasten the PULLS (OO) before you attach the DRAWER FRONT (N). www.sauder.com/services These edges should be even.
Step 20 å å å å Carefully stand your unit upright. å å Push a CAM COVER (NN) onto each HIDDEN CAM. Position your unit in its final location. Turn the ADJUSTABLE FOOT (25E) downward until it touches the floor. IMPORTANT: The ADJUSTABLE FOOT should not extend beyond the bottom edges of the ENDS (A2 and B2). To insert the drawers into your unit, tip the front of the drawer down and drop the rollers on the drawer behind the rollers on the unit. Lift the front of the drawer up and slide it into the unit.
Step 21 å To make adjustments to the drawers, loosen SCREW #4 in the SLIDES a 1/4 turn, then turn the CAM clockwise or counterclockwise. Notice how the drawer raises or lowers as you turn the CAM. The higher the screw in the oblong hole, the higher your drawer front will be. The lower the screw, the lower the drawer front. By adjusting the drawers this way, it will help the DRAWER FRONTS line up better when closed. Tighten the SCREW when finished with adjustments.
409733 Utilisez les instructions d’assemblage en français avec les schémas étape par étape du manuel d’instruction en anglais. Chaque étape en français correspond à la même étape en anglais. La pièce devant être attachée à l’élément est représentée en gris sur les schémas de chaque étape pour plus de précision. Comparer la “Liste de pièces” ci-dessous avec la “PART IDENTIFICATION” du manuel en anglais pour vous familiariser avec les pièces avant l’assemblage.
ÉTAPE 1 ÉTAPE 8 Ne pas serrer les EXCENTRIQUES ESCAMOTABLES dans cette étape. Insérer un GOUPILLES EN MÉTAL (LL) dans les trous des chants courts de la TABLETTE DE SURMEUBLE (BB2). Assembler l'élément sur un sol à moquette ou sur le carton vide pour éviter d'endommager l'élément ou le sol. Fixer la TABLETTE DE SURMEUBLE (BB2) dans l'EXTRÉMITÉ DROITE DE SURMEUBLE (Y3). Serrer la EXCENTRIQUES ESCAMOTABLE.
ÉTAPE 15 ÉTAPE 19 1. Insérer les CÔTÉS DE TIROIR À CRAYONS (D83 et D84) en biseau dans la fente dans chaque extrémité du DEVANT DE TIROIR À CRAYONS (I). Tout d'abord, fixer deux POIGNÉES (OO) au DEVANT DE TIROIR (N). Utiliser quatre VIS À MÉTAUX 16 mm ARGENTÉES (YY). 2. Enfiler le FOND DE TIROIR À CRAYONS (D726) dans les rainures des CÔTÉS DE TIROIR À CRAYONS (D83 et D84) et du DEVANT DE TIROIR À CRAYONS (I). Fixer ensuite le DEVANT DE TIROIR (N) au DEVANT DE CAISSON DE TIROIR (W).
409733 Use estas instrucciones de ensamblaje en español junto con las figuras paso-a-paso provistas en el folleto inglés. Cada paso en español corresponde al mismo paso en inglés. Se destacan las figuras de cada paso con una tonalidad oscura para mostrar precisamente cual parte se debe montar a la unidad. Compare la “Lista de Part” abajo con la “Part Identification” en el folleto en inglés para familiarizarse con Las partes de ensamblaje.
PASO 1 PASO 5 No apriete los EXCÉNTRICOS ESCONDIDOS en este paso. Fije el GABINETE DERECHO (40CA) y el GABINETE IZQUIERDO (40CB) a los EXTREMOS (A2 y B2) y al PARAL (C). Utilice doce TORNILLOS DORADOS DE CABEZA PERDIDA de 8 mm (BBB) a través de los agujeros No. 1 y No. 3. Ensamble la unidad sobre un piso alfombrado o sobre el cartón vacío para evitar rayar la unidad o el piso.
PASO 8 PASO 13 Inserte uno ESPIGAS DE METAL (LL) dentro de los agujeros de los bordes cortos del ESTANTE DE ORGANIZADOR (BB2). Fije el PARAL (C2) al PANEL SUPERIOR (D2) y FONDO (E2). Apriete cuatro EXCÉNTRICOS ESCONDIDOS. NOTA: Asegúrese que los SOPORTES estén nivelados con el borde del PARAL DE ORGANIZADOR. Fije el VELO DE FONDO (F2) al PARAL (C2). Utilice tres TORNILLOS NEGROS DE CABEZA PERDIDA de 48 mm (UU). Fije el PARAL DE ORGANIZADOR (AA) al ESTANTE DE ORGANIZADOR (BB).
PASO 16 PASO 19 1. Inserte los LADOS DE CAJÓN (D30 y D31) en ángulo dentro del encaje en cada extremo del FRENTE DE CAJÓN (W). Primero, fije dos TIRADORES (OO) a la CARA DE CAJÓN (N). Utilice cuatro TORNILLOS PLATEADOS DE METAL de 16 mm (YY). 2. Deslice el FONDO DE CAJÓN (D716) dentro de las ranuras de los LADOS DE CAJÓN (D30 y D31) y del FRENTE DE CAJÓN (W). 3. Fije el DORSO DE CAJÓN (D77) a los LADOS DE CAJÓN (D30 y D31). Utilice cuatro TORNILLOS NEGROS DE CABEZA PERDIDA de 40 mm (EEE).
WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded shelves and drawers. • Improper loading can cause the product to be top-heavy. • Risk of injury. • Top-heavy furniture can tip over. • Overloaded shelves and drawers can break. • Never exceed the weight limits shown in the instructions.
ADVERTENCIA Por favor use el mobiliario correcta y seguramente. El mal uso puede causar riesgos de seguridad o daño a las unidades o artículos domésticos. Cuidadosamente lea la tabla a continuación. Esté alerto de: Puede ocurrir: Evitar el problema: • Estantes y cajones sobrecargados • Riesgo de lesiones. • Cargar el producto de manera inadecuada • El mobiliario inestable puede volcarse. puede causar la inestabilidad. • Estantes y cajones sobrecargados pueden romperse.
5-YEAR LIMITED WARRANTY 1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a period of five years from the date of purchase against defects in materials or workmanship of Sauder furniture components. As used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 2.
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the purchase and assembly process was a positive experience and you feel good about the furniture you just built. If you need assistance or want to learn more, please contact our award-winning, Ohio-based customer service team at 800-523-3987 or Sauder.com. Set a world record for speed? Feeling good about yourself? Nice. Get social with it on any of these quality share sites.
