Instructions / Assembly
Step 15
å
To make adjustments to the drawer, loosen SCREW #4 in the SLIDES a 1/4 turn, then turn the CAM
clockwise or counter-clockwise. Notice how the drawer raises or lowers as you turn the CAM. The
hiher the screw in the oblon hole, the hiher your drawer front will be. The lower the screw, the lower
the drawer front. By adjustin the drawer this way, it will help the DRAWER FRONT line up better when
closed. Tihten the SCREW when fi nished with adjustments.
å
NOTE: Please read the back paes of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
158002 www.sauder.com/servicesPae 20
CamThe hiher the screw in the oblon hole,
the hiher your drawer front will be. The
lower the screw, the lower the drawer front.
And to celebrate, why not share your success story?
Loosen screw #4 a 1/4 turn, turn the cam a 1/4 turn
maximum in both the clockwise and counter-clockwise
directions to make adjustments, and then tihten screw #4.
43