Instructions / Assembly

Step 9
158002 www.sauder.com/servicesPae 14
å
Insert the DRAWER SIDES (D88 and D256) at an
angle into the slot at each end of the DRAWER
FRONT (I).
å
Slide the DRAWER BOTTOM (D729) into the
grooves in the DRAWER SIDES (D88 and D256)
and DRAWER FRONT (I).
å
Fasten the DRAWER BRACE (M63) to the
DRAWER FRONT (I). Tighten one HIDDEN CAM.
å
Fasten the DRAWER BACK (D61) to the DRAWER
SIDES (D88 and D256) and DRAWER BRACE (M63). Use
five BLACK 1-9/16" FLAT HEAD SCREWS (30S).
The tabs should insert freely into the
slots. Gently tilt the DRAWER SIDES side
to side until the tabs slip into the slots.
12
34
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT roove.
With the palm of your hand, tap the
DRAWER BOTTOM down into the roove.
Groove
Arrow
Maximum
210 derees
Minimum
190 derees
Start each screw a few turns before
completely tihtenin any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(5 used in this step)
30S
I
I
I
VIEW THE T-LOCK BOX VIDEO
Unfi nished
surface
Surface with
HIDDEN CAM
D256
D61
D88
D729
D256
D88
D256
D88
M63
M63