Instructions / Assembly

Step 8
158002www.sauder.com/services
Pae 13
å
Carefully turn your unit over onto its front edes. Unfold the
BACK (G) and lay it over your unit.
å
Make equal marins alon all four edes of the BACK (G). Push
on opposite corners of your unit if needed to make it "square".
å
Fasten the BACK (G) to your unit usin the NAILS (QQ).
å
NOTE: Be sure to tap NAILS into the holes that line up over the
UPRIGHT (C) and SHELF (E).
å
NOTE: Perforations have been provided for access throuh the
BACK. Carefully cut out the holes needed.
å
Push a HIDDEN CAM (1F) into the DRAWER BRACE (M63).
Then, insert the metal end of a CAM DOWEL (2F) into the
HIDDEN CAM.
Do not stand the unit upriht without the
BACK fastened. The unit may collapse.
Caution
Unfi nished
surface
These holes must line up over
the UPRIGHT (C) and SHELF (E).
NAIL
(26 used for the BACK)
QQ
Arrow
1F
2F
Do not tihten
the HIDDEN CAM
in this step.
G
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
M63