Instructions / Assembly

Step 5
å
Fasten the LEFT END (B) to the LEFT MOLDING (R).
Tihten two TWIST-LOCK® FASTENERS.
å
Fasten the UPRIGHT (C) to the TOP (D). Tihten two
TWIST-LOCK® FASTENERS.
158002 www.sauder.com/servicesPae 10
How to use the SAUDER TWIST-LOCK
®
FASTENER
1. Insert the dowel end of the FASTENER into the hole of the
adjoinin part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoinin part while lockin
the FASTENER.
2. Tihten the FASTENER with a Phillips screwdriver as tiht
as possible.
Dowel end
R
D
C
B
Surface with
TWIST-LOCK®
FASTENERS
Surface without
TWIST-LOCK®
FASTENERS
Finished ede
Do not stand the unit upriht without the
BACK fastened. The unit may collapse.
Caution