2009 Saturn VUE Green Line Hybrid Owner Manual Seats and Restraint System ............................... 1-1 Head Restraints .............. 1-2 Front Seats .................... 1-3 Rear Seats .................... 1-9 Safety Belts .................. 1-10 Child Restraints ............. 1-22 Airbag System .............. 1-41 Restraint System Check ...................... 1-56 Features and Controls ...... 2-1 Keys ............................. 2-2 Doors and Locks ............ 2-6 Windows ......................
ii Preface SATURN, the SATURN Emblem, and the name VUE are registered trademarks of Saturn Corporation. GENERAL MOTORS and GM are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. Saturn reserves the right to make changes after that time without further notice. Read this manual from beginning to end to learn about the vehicle’s features and controls. Pictures, symbols, and words work together to explain vehicle operation.
Preface Index To quickly locate information about the vehicle use the Index in the back of the manual. It is an alphabetical list of what is in the manual and the page number where it can be found. Safety Warnings and Symbols { CAUTION These mean there is something that could hurt you or other people. Cautions tell what the hazard is and what to do to avoid or reduce the hazard. Read these cautions. A notice tells about something that can damage the vehicle.
iv Preface Vehicle Symbol Chart Here are some additional symbols that may be found on the vehicle and what they mean. For more information on the symbol, refer to the index. B: Engine Coolant Temperature >: Safety Belt Reminders O: Exterior Lamps 7: Tire Pressure Monitor #: Fog Lamps F: Traction Control M: .
Seats and Restraint System Seats and Restraint System Lap-Shoulder Belt .............1-17 Safety Belt Use During Pregnancy .......................1-22 Safety Belt Extender .........1-22 Child Restraints Head Restraints Head Restraints ..................1-2 Front Seats Manual Seats .....................1-3 Seat Height Adjuster ...........1-4 Power Seat ........................1-4 Manual Lumbar ..................1-5 Heated Seats .....................1-5 Reclining Seatbacks ...........
1-2 Seats and Restraint System Head Restraints The front and rear seats have adjustable head restraints in the outboard seating positions. { CAUTION With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/spinal injury in a crash. Do not drive until the head restraints for all occupants are installed and adjusted properly.
Seats and Restraint System Active Head Restraint System The vehicle has an active head restraint system in the front outboard seating positions. The active head restraints automatically tilt forward to reduce the risk of neck injury if the vehicle is hit from behind. Front Seats 1-3 To move a manual seat forward or rearward: Manual Seats { CAUTION You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving.
1-4 Seats and Restraint System Seat Height Adjuster Power Seat a: To adjust the seat: Raise or lower the front or rear part of the seat cushion. If the vehicle has a manual driver seat height adjuster, it is located on the outboard side of the seat near the front of the seat cushion. To raise the seat, move the lever upward repeatedly until the seat is at the desired height. To lower the seat, move the lever downward repeatedly until the seat is at the desired height.
Seats and Restraint System Manual Lumbar M (Heated Seat): Press this button to turn on the heated seat. The indicator light on the button shows that the feature is on and the level of heat, three being the highest. Press the button to choose the level of heat. The passenger seat may take longer to heat up. 1-5 { CAUTION If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there.
1-6 Seats and Restraint System To recline the seatback: Power Reclining Seatbacks 1. Lift the recline lever. 2. Move the seatback to the desired position, then release the lever to lock the seatback in place. Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts cannot do their job when you are reclined like this. 3. Push and pull on the seatback to make sure it is locked. The shoulder belt cannot do its job.
Seats and Restraint System Passenger Folding Seatback The front passenger seatback may fold flat. { CAUTION Do not have a seatback reclined if the vehicle is moving. If you fold the seatback forward to carry longer objects, such as skis, be sure any such cargo is not near an airbag. In a crash, an inflating airbag might force that object toward a person. This could cause severe injury or even death. Secure objects away from the area in which an airbag would inflate.
1-8 Seats and Restraint System To raise the seatback: 1. Lift the recliner lever, located on the outboard side of the seat, up fully and push up on the seatback. 2. Continue raising the seatback until the seatback re-engages. 3. Lift the recliner lever, located on the outboard side of the seat, up fully and fold the seatback forward until it disengages. 4. Continue to fold the seat forward into the folded position. 5. Pull up on the seatback to be sure it is locked.
Seats and Restraint System Rear Seats Split Folding Rear Seat The rear split bench seatbacks can be folded forward, upright, or partially reclined, independent of the other seatback position. { CAUTION If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatbacks to be sure they are locked.
1-10 Seats and Restraint System Safety Belts Safety Belts: They Are for Everyone This section of the manual describes how to use safety belts properly. It also describes some things not to do with safety belts. { CAUTION Do not let anyone ride where a safety belt cannot be worn properly. In a crash, if you or your passenger(s) are not wearing safety belts, the injuries can be much worse. You can hit things inside the vehicle harder or be ejected from the vehicle.
Seats and Restraint System 1-11 Why Safety Belts Work When you ride in or on anything, you go as fast as it goes. Put someone on it. Take the simplest vehicle. Suppose it is just a seat on wheels. Get it up to speed. Then stop the vehicle. The rider does not stop. The person keeps going until stopped by something. In a real vehicle, it could be the windshield...
1-12 Seats and Restraint System With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense. Questions and Answers About Safety Belts Q: Will I be trapped in the vehicle after a crash if I am wearing a safety belt? or the instrument panel... A: You could be — whether you are wearing a safety belt or not.
Seats and Restraint System Q: If I am a good driver, and I never drive far from home, why should I wear safety belts? A: You may be an excellent driver, but if you are in a crash — even one that is not your fault — you and your passenger(s) can be hurt. Being a good driver does not protect you from things beyond your control, such as bad drivers. Most accidents occur within 25 miles (40 km) of home. And the greatest number of serious injuries and deaths occur at speeds of less than 40 mph (65 km/h).
1-14 Seats and Restraint System fatal injuries. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The shoulder belt locks if there is a sudden stop or crash. Q: What is wrong with this? { CAUTION { CAUTION You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit snugly against your body.
Seats and Restraint System Q: What is wrong with this? A: The belt is buckled in the wrong 1-15 { CAUTION { CAUTION You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not on the pelvic bones. This could cause serious internal injuries. Always buckle your belt into the buckle nearest you. You can be seriously injured if your belt goes over an armrest like this.
1-16 Seats and Restraint System Q: What is wrong with this? A: The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. { CAUTION You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which are not as strong as shoulder bones.
Seats and Restraint System { CAUTION You can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, you would not be restrained by the shoulder belt. Your body could move too far forward increasing the chance of head and neck injury. You might also slide under the lap belt. The belt force would then be applied right on the abdomen. That could cause serious or fatal injuries. The shoulder belt should go over the shoulder and across the chest.
1-18 Seats and Restraint System The lap-shoulder belt may lock if you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it. Then pull the belt across you more slowly. If the shoulder portion of a passenger belt is pulled out all the way, the child restraint locking feature may be engaged. If this happens, let the belt go back all the way and start again.
Seats and Restraint System 1-19 Before a door is closed, be sure the safety belt is out of the way. If a door is slammed against a safety belt, damage can occur to both the safety belt and the vehicle. Shoulder Belt Height Adjuster The vehicle has a shoulder belt height adjuster for the driver and right front passenger seating positions. To unlatch the belt, push the button on the buckle. The belt should return to its stowed position.
1-20 Seats and Restraint System Safety Belt Pretensioners This vehicle has safety belt pretensioners for the front outboard occupants. Although the safety belt pretensioners cannot be seen, they are part of the safety belt assembly. They can help tighten the safety belts during the early stages of a moderate to severe frontal, near frontal, or rear crash if the threshold conditions for pretensioner activation are met.
Seats and Restraint System 1-21 { CAUTION A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. 3. Be sure that the belt is not twisted and it lies flat. The elastic cord must be under the belt and the guide on top. 4.
1-22 Seats and Restraint System Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they do not wear safety belts. The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it is more likely that the fetus will not be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly.
Seats and Restraint System The manufacturer’s instructions that come with the booster seat, state the weight and height limitations for that booster. Use a booster seat with a lap-shoulder belt until the child passes the below fit test: • Sit all the way back on the seat. Do the knees bend at the seat edge? If yes, continue. If no, return to the booster seat. • Buckle the lap-shoulder belt. Does the shoulder belt rest on the shoulder? If yes, continue. If no, try using the rear safety belt comfort guide.
1-24 Seats and Restraint System { CAUTION { CAUTION Never do this. Never do this. Never allow two children to wear the same safety belt. The safety belt can not properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A safety belt must be used by only one person at a time. Never allow a child to wear the safety belt with the shoulder belt behind their back. A child can be seriously injured by not wearing the lap-shoulder belt properly.
Seats and Restraint System Infants and Young Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle.
1-26 Seats and Restraint System For most basic types of child restraints, there are many different models available. When purchasing a child restraint, be sure it is designed to be used in a motor vehicle. If it is, the restraint will have a label saying that it meets federal motor vehicle safety standards. { CAUTION Never do this. Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Never put a rear-facing child restraint in the right front seat.
Seats and Restraint System { CAUTION { CAUTION To reduce the risk of neck and head injury during a crash, infants need complete support. This is because an infant’s neck is not fully developed and its head weighs so much compared with the rest of its body. In a crash, an infant in a rear-facing child restraint settles into the restraint, so the crash forces can be distributed across the strongest part of an infant’s body, the back and shoulders.
1-28 Seats and Restraint System Securing an Add-On Child Restraint in the Vehicle { CAUTION (B) Forward-Facing Child Seat A forward-facing child seat (B) provides restraint for the child’s body with the harness. (C) Booster Seats A booster seat (C) is a child restraint designed to improve the fit of the vehicle’s safety belt system. A booster seat can also help a child to see out the window.
Seats and Restraint System To help reduce the chance of injury, the child restraint must be secured in the vehicle. Child restraint systems must be secured in vehicle seats by lap belts or the lap belt portion of a lap-shoulder belt, or by the LATCH system. See Lower Anchors and Tethers for Children (LATCH) on page 1-31 for more information. A child can be endangered in a crash if the child restraint is not properly secured in the vehicle.
1-30 Seats and Restraint System A label on the sun visor says, “Never put a rear-facing child restraint in the front.” This is because the risk to the rear-facing child is so great, if the airbag deploys. { CAUTION A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag.
Seats and Restraint System Lower Anchors and Tethers for Children (LATCH) The LATCH system holds a child restraint during driving or in a crash. This system is designed to make installation of a child restraint easier. The LATCH system uses anchors in the vehicle and attachments on the child restraint that are made for use with the LATCH system.
1-32 Seats and Restraint System Top Tether Anchor A top tether (A, C) anchors the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment (B) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of the child restraint during driving or in a crash. Your child restraint may have a single tether (A) or a dual tether (C).
Seats and Restraint System The top tether anchors are located on the back of the rear seatback. Be sure to use an anchor located on the same side of the vehicle as the seating position where the child restraint will be placed. To assist you in locating the lower anchors, each seating position with lower anchors has two labels, near the crease between the seatback and the seat cushion. To assist you in locating the top tether anchors, the top tether anchor symbol is located near the top tether anchors.
1-34 Seats and Restraint System Securing a Child Restraint Designed for the LATCH System { CAUTION If a LATCH-type child restraint is not attached to anchors, the child restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed.
Seats and Restraint System Do not fold the empty rear seat with a safety belt buckled. This could damage the safety belt or the seat. Unbuckle and return the safety belt to its stowed position, before folding the seat. 1. Attach and tighten the lower attachments to the lower anchors. If the child restraint does not have lower attachments or the desired seating position does not have lower anchors, secure the child restraint with the top tether and the safety belts.
1-36 Seats and Restraint System Securing a Child Restraint in a Rear Seat Position When securing a child restraint in a rear seating position, study the instructions that came with the child restraint to make sure it is compatible with this vehicle. If the position you are using has an adjustable headrest or head restraint and you are using a dual tether, route the tether around the headrest or head restraint.
Seats and Restraint System 1-37 In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. If the child restraint does not have the LATCH system, you will be using the safety belt to secure the child restraint in this position. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say.
1-38 Seats and Restraint System 6. If the child restraint has a top tether, follow the child restraint manufacturer’s instructions regarding the use of the top tether. See Lower Anchors and Tethers for Children (LATCH) on page 1-31 for more information. 7. Push and pull the child restraint in different directions to be sure it is secure. 5.
Seats and Restraint System { CAUTION CAUTION (Continued) A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates and the passenger seat is in a forward position.
1-40 Seats and Restraint System You will be using the lap-shoulder belt to secure the child restraint in this position. Follow the instructions that came with the child restraint. 1. Move the seat as far back as it will go before securing the forward-facing child restraint. When the passenger sensing system has turned off the right front passenger frontal airbag, the off indicator on the passenger airbag status indicator should light and stay lit when the vehicle is started.
Seats and Restraint System 7. If the vehicle does not have a rear seat and the child restraint has a top tether, follow the child restraint manufacturer’s instructions regarding the use of the top tether. See Lower Anchors and Tethers for Children (LATCH) on page 1-31 for more information. 6. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor.
1-42 Seats and Restraint System For frontal airbags, the word AIRBAG will appear on the middle part of the steering wheel for the driver and on the instrument panel for the right front passenger. With seat-mounted side impact airbags, the word AIRBAG will appear on the side of the seatback closest to the door. With roof-rail airbags, the word AIRBAG will appear along the headliner or trim.
Seats and Restraint System { CAUTION { CAUTION Airbags inflate with great force, faster than the blink of an eye. Anyone who is up against, or very close to, any airbag when it inflates can be seriously injured or killed. Do not sit unnecessarily close to the airbag, as you would be if you were sitting on the edge of your seat or leaning forward. Safety belts help keep you in position before and during a crash. Always wear your safety belt, even with airbags.
1-44 Seats and Restraint System Where Are the Airbags? The driver frontal airbag is in the middle of the steering wheel. The right front passenger frontal airbag is in the instrument panel on the passenger side. Driver Side shown, Passenger Side similar The seat-mounted side impact airbags for the driver and right front passenger are in the side of the seatbacks closest to the door.
Seats and Restraint System { CAUTION Driver Side shown, Passenger Side similar The roof-rail airbags for the driver, right front passenger, and second row outboard passengers are in the ceiling above the side windows. If something is between an occupant and an airbag, the airbag might not inflate properly or it might force the object into that person causing severe injury or even death. The path of an inflating airbag must be kept clear.
1-46 Seats and Restraint System Frontal airbags may inflate at different crash speeds. For example: • If the vehicle hits a stationary object, the airbags could inflate at a different crash speed than if the vehicle hits a moving object. • If the vehicle hits an object that deforms, the airbags could inflate at a different crash speed than if the vehicle hits an object that does not deform.
Seats and Restraint System is determined by the location and severity of the side impact. In a rollover event, roof-rail airbag deployment is determined by the direction of the roll. What Makes an Airbag Inflate? In a deployment event, the sensing system sends an electrical signal triggering a release of gas from the inflator. Gas from the inflator fills the airbag causing the bag to break out of the cover and deploy. The inflator, the airbag, and related hardware are all part of the airbag module.
1-48 Seats and Restraint System What Will You See After an Airbag Inflates? After the frontal airbags and seat-mounted side impact airbags inflate, they quickly deflate, so quickly that some people may not even realize an airbag inflated. Roof-rail airbags may still be at least partially inflated for some time after they deploy. Some components of the airbag module may be hot for several minutes. For location of the airbag modules, see What Makes an Airbag Inflate? on page 1-47.
Seats and Restraint System • The vehicle has a crash sensing and diagnostic module which records information after a crash. See Vehicle Data Recording and Privacy on page 7-14 and Event Data Recorders on page 7-14. • Let only qualified technicians work on the airbag systems. Improper service can mean that an airbag system will not work properly. See your dealer/retailer for service. Passenger Sensing System The vehicle has a passenger sensing system for the right front passenger position.
1-50 Seats and Restraint System According to accident statistics, children are safer when properly secured in a rear seat in a correct child restraint for their weight and size. We recommend that children be secured in a rear seat, including: an infant or a child riding in a rear-facing child restraint; a child riding in a forward-facing child seat; an older child riding in a booster seat; and children, who are large enough, using safety belts.
Seats and Restraint System If the vehicle does not have a rear seat that will accommodate a rear-facing child restraint, a rear-facing child restraint should not be installed in the vehicle, even if the airbag is off. • The system determines that a The passenger sensing system is designed to turn off the right front passenger airbag and seat-mounted side impact airbag if: • The right front passenger seat is • The right front passenger seat • Or, if there is a critical problem is unoccupied.
1-52 Seats and Restraint System For some children who have outgrown child restraints and for very small adults, the passenger sensing system may or may not turn off the right front passenger frontal airbag and seat-mounted side impact airbag, depending upon the person’s seating posture and body build. Everyone in the vehicle who has outgrown child restraints should wear a safety belt properly —whether or not there is an airbag for that person.
Seats and Restraint System If the Off Indicator is Lit for an Adult-Size Occupant If this happens, use the following steps to allow the system to detect that person and enable the right front passenger frontal airbag and seat-mounted side impact airbag: 1. Turn the vehicle off. 2. Remove any additional material from the seat, such as blankets, cushions, seat covers, seat heaters, or seat massagers. 3. Place the seatback in the fully upright position.
1-54 Seats and Restraint System A thick layer of additional material, such as a blanket or cushion, or aftermarket equipment such as seat covers, seat heaters, and seat massagers can affect how well the passenger sensing system operates. We recommend that you not use seat covers or other aftermarket equipment except when approved by GM for your specific vehicle.
Seats and Restraint System Adding Equipment to Your Airbag-Equipped Vehicle Q: Is there anything I might add to or change about the vehicle that could keep the airbags from working properly? A: Yes. If you add things that change the vehicle’s frame, bumper system, height, front end or side sheet metal, they may keep the airbag system from working properly.
1-56 Seats and Restraint System Q: Because I have a disability, I have to get my vehicle modified. How can I find out whether this will affect my airbag system? A: If you have questions, call Customer Assistance. The phone numbers and addresses for Customer Assistance are in Step Two of the Customer Satisfaction Procedure in this manual. See Customer Satisfaction Procedure on page 7-1.
Seats and Restraint System Replacing Restraint System Parts After a Crash { CAUTION A crash can damage the restraint systems in your vehicle. A damaged restraint system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure your restraint systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible. After a minor crash, replacement of safety belts may not be necessary.
1-58 Seats and Restraint System ✍ NOTES
Features and Controls Features and Controls Windows Windows .............................2-9 Power Windows ..................2-9 Sun Visors ........................2-10 Theft-Deterrent Systems Keys Keys ...................................2-2 Remote Keyless Entry (RKE) System ...................2-3 Remote Keyless Entry (RKE) System Operation ...2-4 Doors and Locks Door Locks .........................2-6 Power Door Locks ..............2-6 Delayed Locking .................2-6 Automatic Door Lock ..........
2-2 Features and Controls Storage Areas Glove Box .........................2-37 Cupholders .......................2-37 Sunglasses Storage Compartment ...................2-37 Center Console Storage ....2-37 Driver Storage Compartment ...................2-38 Rear Seat Armrest ............2-38 Convenience Net ..............2-38 Cargo Cover .....................2-38 Cargo Tie Downs ..............2-39 Cargo Management System ............................
Features and Controls Notice: If you ever lock your keys in the vehicle, you may have to damage the vehicle to get in. Be sure you have spare keys. If you are locked out of the vehicle, contact Roadside Assistance. See Roadside Assistance Program on page 7-5 for more information. Remote Keyless Entry (RKE) System If this vehicle has the Remote Keyless Entry (RKE) system, it operates on a radio frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada.
2-4 Features and Controls Remote Keyless Entry (RKE) System Operation L (Vehicle Locator/Panic Alarm): Press and release to activate the alarm. The turn signal lamps flash and the horn sounds three times. The Remote Keyless Entry (RKE) transmitter functions work up to 65 feet (20 m) away from the vehicle. Press and hold L for more than two seconds and the turn signal lamps flash and the horn sounds for 30 seconds. There are other conditions which can affect the performance of the transmitter.
Features and Controls Programming Transmitters to the Vehicle Only RKE transmitters programmed to the vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer/ retailer. When the replacement transmitter is programmed to the vehicle, all remaining transmitters must also be programmed. Any lost or stolen transmitters no longer work once the new transmitter is programmed. Each vehicle can have up to eight transmitters programmed to it.
2-6 Features and Controls Doors and Locks Door Locks CAUTION (Continued) • Young children who get into { CAUTION Unlocked doors can be dangerous. • Passengers, especially children, can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. You increase the chance of being thrown out of the vehicle in a crash if the doors are not locked. So, wear safety belts properly and lock the doors whenever you drive.
Features and Controls Automatic Door Lock The doors are programmed to automatically lock when the shift lever is moved into a forward gear. The automatic door lock feature cannot be disabled. Rear Door Security Locks The vehicle has rear door security locks to prevent passengers from opening the rear doors from the inside. 2-7 To set the locks, insert a key into the slot and turn it to the horizontal position. The door can only be opened from the outside with the door unlocked.
2-8 Features and Controls Liftgate CAUTION (Continued) { CAUTION • If the vehicle is equipped with Exhaust gases may enter the vehicle if it is driven with the liftgate, trunk/hatch open, or with any objects that pass through the seal between the body and the trunk/hatch or liftgate. Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. If the vehicle must be driven with the liftgate, or trunk/hatch open: • Close all of the windows.
Features and Controls Windows CAUTION { CAUTION Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather. 2-9 (Continued) The windows will function and they could be seriously injured or killed if caught in the path of a closing window.
2-10 Features and Controls To open or close a window, press or pull up on the switch. The power windows operate when the ignition is in ON/RUN or ACC/ACCESSORY, or while in Retained Accessory Power (RAP). See Retained Accessory Power (RAP) on page 2-15. Express-Down Window The driver window switch has an express-down feature that lowers the window without holding the switch. Press the switch part way and the window will open a small amount.
Features and Controls To arm the theft-deterrent system, close all doors and press Q on the RKE transmitter. The security light comes on solid for approximately 30 seconds and then flashes slowly. If Q is pressed a second time, the theft-deterrent system activates immediately. The content theft deterrent alarm is not armed until the security light flashes slowly.
2-12 Features and Controls PASS-Key® III+ Electronic Immobilizer The PASS-Key III+ system operates on a radio frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
Features and Controls When trying to start the vehicle if the engine does not start and the security light on the instrument panel cluster comes on, there may be a problem with your theft-deterrent system. Turn the ignition off and try again. If the engine still does not start, and the key appears to be not damaged, wait about five minutes and try another ignition key and check the fuse. See Fuses and Circuit Breakers on page 5-75.
2-14 Features and Controls Starting and Operating Your Vehicle New Vehicle Break-In Notice: The vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: • Do not tow a trailer during break-in. See Towing a Trailer on page 4-26 for the trailer towing capabilities of your vehicle and more information. Following break-in, engine speed and load can be gradually increased.
Features and Controls ACC (ACC/ACCESSORY): This is the position in which you can operate the electrical accessories or items plugged into the accessory power outlets. Use this position if the vehicle must be pushed or towed. ON/RUN: This position can be used to operate the electrical accessories and to display some instrument panel cluster warning and indicator lights. The switch stays in this position when the engine is running. The transmission is also unlocked in this position.
2-16 Features and Controls Operate the engine and transmission gently to allow the oil to warm up and lubricate all moving parts. The vehicle has a Computer-Controlled Cranking System. This feature assists in starting the engine and protects components. If the ignition key is turned to the START position, and then released when the engine begins cranking, the engine will continue cranking for a few seconds or until the vehicle starts.
Features and Controls Automatic Engine Start/Stop { CAUTION There is something about the vehicle that can make it move suddenly, and you or others can be seriously injured. This can happen if the vehicle is in the Auto Stop mode, and the shift lever is in D (Drive). Because the vehicle has the Automatic Engine Start/Stop feature, the vehicle’s engine might seem to be shut off when you come to a complete stop.
2-18 Features and Controls The Engine Will Remain Running When: • The engine, transmission, or hybrid battery is not warmed up yet. • The outside temperature is high — usually above 95°F (35°C) and the climate control system is working to cool the vehicle in A/C mode (yellow light illuminated on A/C button) or if defrost is selected. See Automatic Climate Control System on page 3-17 for more information. • The shift lever is in P (Park), R (Reverse), N (Neutral) or M (Manual Mode).
Features and Controls Engine Coolant Heater The engine coolant heater can provide easier starting and better fuel economy during engine warm-up in cold weather conditions at or below 0°F (−18°C). Vehicles with an engine coolant heater should be plugged in at least four hours before starting. Some models may have an internal thermostat in the cord which will prevent engine coolant heater operation at temperatures above 0°F (−18°C). To Use the Engine Coolant Heater 1. Turn off the engine. 2.
2-20 Features and Controls Automatic Transmission Operation The shift lever is located on the console between the seats. There are several different positions for the automatic transmission. P (Park): This position locks the front wheels. It is the best position to use when you start the engine because the vehicle cannot move easily. { CAUTION It is dangerous to get out of the vehicle if the shift lever is not fully in P (Park) with the parking brake firmly set. The vehicle can roll.
Features and Controls N (Neutral): In this position, the engine does not connect with the wheels. To restart the engine when the vehicle is already moving, use N (Neutral) only. Also, use N (Neutral) when your vehicle is being towed. Notice: Shifting out of P (Park) or N (Neutral) with the engine running at high speed may damage the transmission. The repairs would not be covered by the vehicle warranty. Be sure the engine is not running at high speed when shifting the vehicle.
2-22 Features and Controls Manual Shift Mode (MSM) (Automatic Transmission) To use this feature, do the following: 1. Move the shift lever from D (Drive) rearward to the M (Manual Mode). The display will show a 3 for third gear. When coming to a stop in the manual position, the vehicle will automatically shift to 1 (First) gear. 2. Press the plus (+) button to upshift or the minus (−) button to downshift. While driving in MSM, the vehicle will have sportier performance.
Features and Controls To release the parking brake, hold the brake pedal down. Pull the parking brake lever up until you can press the release button. Hold the release button in as you move the brake lever all the way down. Release the parking brake before driving the vehicle. Notice: Driving with the parking brake on can overheat the brake system and cause premature wear or damage to brake system parts. Make sure that the parking brake is fully released and the brake warning light is off before driving.
2-24 Features and Controls 3. Turn the ignition key to LOCK/OFF. 4. Remove the key and take it with you. If you can leave the vehicle with the key, the vehicle is in P (Park). Leaving the Vehicle With the Engine Running { CAUTION It can be dangerous to leave the vehicle with the engine running. The vehicle could move suddenly if the shift lever is not fully in P (Park) with the parking brake firmly set. And, if you leave the vehicle with the engine running, it could overheat and even catch fire.
Features and Controls Shifting Out of Park The vehicle has an electronic shift lock release system. The shift lock release is designed to: If the vehicle has an uncharged battery or a battery with low voltage, try charging or jump starting the battery. See Jump Starting on page 5-28 for more information. • Prevent ignition key removal To shift out of P (Park): unless the shift lever is in P (Park) with the shift lever button fully released.
2-26 Features and Controls Engine Exhaust CAUTION { CAUTION Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. Exposure to CO can cause unconsciousness and even death. Exhaust may enter the vehicle if: • The vehicle idles in areas with poor ventilation (parking garages, tunnels, deep snow that may block underbody airflow or tail pipes). • The exhaust smells or sounds strange or different. • The exhaust system leaks due to corrosion or damage.
Features and Controls { CAUTION Idling a vehicle in an enclosed area with poor ventilation is dangerous. Engine exhaust may enter the vehicle. Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. Never run the engine in an enclosed area that has no fresh air ventilation. For more information, see Engine Exhaust on page 2-26. Follow the proper steps to be sure the vehicle will not move. See Shifting Into Park on page 2-23.
2-28 Features and Controls Outside Power Mirrors To adjust the power mirrors: 1. Turn the knob to choose the left (L) or the (R) right mirror. 2. Adjust each mirror so that you can see the side of your vehicle and the area behind your vehicle. 3. Return the control to the center position so the mirror cannot be moved. The mirrors can be manually folded inward toward the vehicle. Return to the original position to use correctly. Controls for the outside power mirrors are located on the driver door.
Features and Controls OnStar® System OnStar uses several innovative technologies and live advisors to provide a wide range of safety, security, information, and convenience services. If the airbags deploy, the system is designed to make an automatic call to OnStar Emergency advisors who can request emergency services be sent to your location. If the keys are locked in the vehicle, call OnStar at 1-888-4-ONSTAR to have a signal sent to unlock the doors.
2-30 Features and Controls • Remote Door Unlock/ Vehicle Alert • OnStar Vehicle Diagnostic Email • GM Goodwrench On Demand Diagnostics • OnStar Hands-Free Calling with 30 trial minutes • OnStar Virtual Advisor (U.S.
Features and Controls OnStar Steering Wheel Controls This vehicle may have a Talk/Mute button that can be used to interact with OnStar Hands-Free Calling. See Audio Steering Wheel Controls on page 3-82 for more information. OnStar voice command does not work unless Personal Calling is activated. To activate Personal Calling, see the OnStar Owner’s Guide. On some vehicles, the mute button can be used to dial numbers into voice mail systems, or to dial phone extensions.
2-32 Features and Controls Your Responsibility Increase the volume of the radio if the OnStar advisor cannot be heard. If the light next to the OnStar buttons is red, the system may not be functioning properly. Press the OnStar button and request a vehicle diagnostic. If the light appears clear (no light is appearing), your OnStar subscription has expired and all services have been deactivated. Press the OnStar button to confirm that the OnStar equipment is active.
Features and Controls Universal Home Remote System Operation If there is one triangular Light Emitting Diode (LED) indicator light above the Universal Home Remote buttons, follow the instructions below. This system provides a way to replace up to three remote control transmitters used to activate devices such as garage door openers, security systems, and home automation devices. Do not use the Universal Home Remote with any garage door opener that does not have the stop and reverse feature.
2-34 Features and Controls To program up to three devices: 1. From inside the vehicle, press and hold down the two outside buttons at the same time, releasing only when the Universal Home Remote indicator light begins to flash, after 20 seconds. This step will erase the factory settings or all previously programmed buttons. Do not hold down the buttons for longer than 30 seconds and do not repeat this step to program the remaining two Universal Home Remote buttons. 2.
Features and Controls It may be helpful to have another person assist with the remaining steps. 6. After Steps 1 through 5 have been completed, locate inside the garage the garage door opener receiver (motor-head unit). Locate the “Learn” or “Smart” button. The name and color of the button may vary by manufacturer. 7. Firmly press and release the “Learn” or “Smart” button. After you press this button, you will have 30 seconds to complete Step 8. 8. Immediately return to the vehicle.
2-36 Features and Controls If you live in Canada, or you are having difficulty programming a gate operator or garage door opener by using the “Programming Universal Home Remote” procedures, regardless of where you live, replace Step 3 under “Programming Universal Home Remote” with the following: Continue to press and hold the Universal Home Remote button while you press and release every two seconds (cycle) the hand-held transmitter button until the frequency signal has been successfully accepted by the U
Features and Controls Reprogramming a Single Universal Home Remote Button Storage Areas To reprogram any of the three Universal Home Remote buttons, repeat the programming instructions earlier in this section, beginning with Step 2. To open the glove box, lift up on the lever. The glove box divider can be removed. The slots on the left side are for storing the divider.
2-38 Features and Controls The top of the center console can extend forward. To adjust, hold the top of the lever up and pull the top of the center console forward. Driver Storage Compartment Your vehicle has a storage area located to left of the steering wheel. Pull down on the handle to access. Rear Seat Armrest Convenience Net Use the convenience net, located in the rear, to store small loads as far forward as possible. The net should not be used to store heavy loads.
Features and Controls Cargo Tie Downs The hooks hold the mesh pocket. To insert a hook on the rail, place the hook in the upper groove of the rail and press it into the lower groove. Four cargo tie-downs are located in the rear compartment of the vehicle. The tie-downs can be used to secure small loads. Cargo Management System If the vehicle has a cargo management system in the rear of the vehicle, it will have rails with adapters and hooks. These are used to hold the net and mesh pocket.
2-40 Features and Controls ✍ NOTES
Instrument Panel Instrument Panel Instrument Panel Overview Instrument Panel Overview ...........................3-4 Hazard Warning Flashers ...3-5 Horn ...................................3-5 Tilt Wheel ...........................3-6 Turn Signal/Multifunction Lever ................................3-6 Turn and Lane-Change Signals .............................3-6 Headlamp High/ Low-Beam Changer ..........3-7 Flash-to-Pass ......................3-7 Windshield Wipers ..............3-7 Rainsense™ II Wipers ....
3-2 Instrument Panel Tire Pressure Light ...........3-29 Malfunction Indicator Lamp ................3-30 Oil Pressure Light .............3-33 Change Engine Oil Light ...3-33 Security Light ....................3-33 Cruise Control Light ..........3-33 Highbeam On Light ...........3-34 Low Washer Fluid Warning Light ..................3-34 Fuel Gage ........................3-34 Low Fuel Warning Light ....3-34 Auto Stop Mode ................3-35 Charge/Assist Gage ..........3-35 Fuel Economy Light ..........
Instrument Panel ✍ NOTES 3-3
3-4 Instrument Panel Instrument Panel Overview
Instrument Panel The main components of the instrument panel are the following: A. Outlet Adjustment on page 3-22. B. Instrument Panel Brightness on page 3-14. C. Turn Signal/Multifunction Lever on page 3-6. D. Instrument Panel Cluster on page 3-23. E. Windshield Wipers on page 3-7. F. Audio System(s) on page 3-56. G. Auxiliary Input Jack. See Radio(s) on page 3-58. H. Exterior Lamps on page 3-12. I. Driver Information Center (DIC) on page 3-36. J. Driver Storage Compartment on page 2-38. K.
3-6 Instrument Panel Tilt Wheel The tilt lever lets the steering wheel be adjusted. Turn Signal/Multifunction Lever Turn and Lane-Change Signals An arrow on the instrument panel cluster flashes in the direction of the turn or lane change. The lever on the left side of the steering column includes: G: Turn and Lane-Change Signals The tilt lever is located on the left side of the steering column. To adjust the steering wheel, hold the wheel and push the lever down.
Instrument Panel Have the bulbs replaced. If a bulb is not burned out, check the fuse. See Fuses and Circuit Breakers on page 5-75 and for burned-out bulbs. Headlamp High/ Low-Beam Changer 2 3 Headlamp High/Low Beam Changer: Push the turn signal/multifunction lever away from you to turn the high beams on. Flash-to-Pass This feature lets you use your high-beam headlamps to signal a driver in front of you that you want to pass.
3-8 Instrument Panel Heavy snow or ice can overload the wiper motor. A circuit breaker will stop the motor until it cools down. Rainsense™ II Wipers For vehicles with Rainsense™ II windshield wipers, the moisture sensor is located next to the inside rearview mirror and is mounted on the windshield. When active, these sensors are able to detect moisture on the windshield and automatically turn on the wipers.
Instrument Panel Rear Window Wiper/Washer The rear wiper and rear wash button is located on the instrument panel above the climate control system. = (Rear Wiper/Washer): Press to wash and wipe the rear window. The rear window washer uses the same reservoir as the windshield washer. Check the windshield washer reservoir level if the front windshield can be worked, but no fluid is sprayed when the rear washer is activated. See Windshield Washer Fluid on page 5-24.
3-10 Instrument Panel Setting Cruise Control { CAUTION If you leave your cruise control on when you are not using cruise, you might hit a button and go into cruise when you do not want to. You could be startled and even lose control. Keep the cruise control switch off until you want to use cruise control. E (On/Off): Press to turn the cruise control system on and off. An indicator light comes on. RES+ (Resume/Accel): Move the thumbwheel up to resume a set speed or to accelerate to a higher speed.
Instrument Panel • To increase the speed in small amounts, press the thumbwheel up toward RES+ briefly and then release it. Each time this is done, the vehicle goes about 1 mph (1.6 km/h) faster. • Use the accelerator pedal to reach the desired speed and press the thumbwheel towards −SET. The new desired speed must be greater than the previous set speed by typically 5 mph.
3-12 Instrument Panel Exterior Lamps AUTO (Automatic): Automatically turns the exterior lamps on and off, depending on outside lighting. ; (Parking Lamps): Turns on the parking lamps together with the following: • • • • Sidemarker Lamps Taillamps License Plate Lamps Instrument Panel Lights The exterior lamp control is located on the instrument panel to the left of the steering wheel.
Instrument Panel Daytime Running Lamps (DRL) Daytime Running Lamps (DRL) can make it easier for others to see the front of your vehicle during the day. Fully functional daytime running lamps are required on all vehicles first sold in Canada. The DRL system makes the low-beam headlamps come on in daylight when the following conditions are met: • The engine is running, • The exterior lamp band is in AUTO, and • The light sensor determines it is daytime.
3-14 Instrument Panel Instrument Panel Brightness This feature controls the brightness of the instrument panel lights. Dome Lamp * (Dome Lamp Override): Press this button to keep the dome lamps and other interior lamps turned off while any door is open. Press this button again to return it to the out position and the lamps automatically come on when any door is opened. + (On/Off): Press this button to turn the dome lamps on and off while the doors are closed.
Instrument Panel on the Driver Information Center (DIC), you may see the voltage move up or down. This is normal. If there is a problem, an alert will be displayed. The battery can be discharged at idle if the electrical loads are very high. This is true for all vehicles. This is because the generator (alternator) may not be spinning fast enough at idle to produce all the power that is needed for very high electrical loads.
3-16 Instrument Panel Accessory Power Outlet(s) The accessory power outlets can be used to connect electrical equipment, such as a cellular phone. The accessory power outlets are located on the rear of the center storage console and in the rear cargo compartment. There may be a power outlet located inside the instrument panel storage area below the climate controls. To use the outlets, remove the cover. When not in use, always cover the outlet with the protective cap.
Instrument Panel Climate Controls Automatic Climate Control System The heating, cooling, and ventilation for the vehicle can be controlled with this system. 3-17 Climate Control Influence on Hybrid Operation and Fuel Economy To maximize your fuel economy, use the following settings (as indicated by the green marking): • Set the fan knob to AUTO. • Set the air delivery knob to AUTO. • Select an air temperature setting near 75°F (23°C). • Select the Hybrid A/C button, if A/C is required. A. B. C. D.
3-18 Instrument Panel Automatic Operation This climate control system automatically maintains the desired temperature inside the vehicle. Do not cover the sensor located on the top of the instrument panel near the windshield or the sensor grille below the climate control faceplate. These two sensors help regulate the inside air temperature. AUTO (Automatic Fan): Turn the fan knob to AUTO for the system to automatically adjust the fan speed to reach the desired inside temperature.
Instrument Panel Temperature Control: Turn clockwise or counterclockwise to increase or decrease the temperature. Typically, the best setting is near 75°F (23°C). Choosing the coldest or warmest temperature setting does not cause the system to heat or cool any faster. 6 (Floor): Air is directed to the floor outlets with some air directed to the windshield. When this mode is selected, the system turns the recirculation mode off. Recirculation mode cannot be selected while in floor mode.
3-20 Instrument Panel # (Normal Air Conditioning): Press to turn the air conditioning system on or off. An indicator light comes on to show that the air conditioning is on. Normal Air Conditioning (A/C) can be selected in any mode as long as the fan is on and the outside air temperature is above freezing. Normal A/C cannot be selected at the same time as Hybrid Air Conditioning (A/C). A flashing indicator light indicates that the air conditioning compressor is currently not available.
Instrument Panel The rear window defogger stays on for about 10 minutes if the vehicle remains at slower vehicle speeds or until the button is pressed, or unless the ignition is turned to ACC/ACCESSORY or LOCK/OFF. If turned on again, the defogger only runs for about five minutes before turning off again. At higher vehicle speeds, the defogger may stay on continuously. The defogger can also be turned off by turning off the ignition. Notice: Do not use anything sharp on the inside of the rear window.
3-22 Instrument Panel Outlet Adjustment Use the louvers located on the air outlets to change the direction of the airflow. Operation Tips • Clear away any ice, snow, or leaves from the air inlets at the base of the vehicle that may block the flow of air into the vehicle. • Do not use any non-GM approved hood deflectors that could adversely affect the performance of the system. • Keep the path under the front seats clear of objects to help circulate the air inside of the vehicle more effectively.
Instrument Panel 3-23 Instrument Panel Cluster The instrument panel cluster is designed to indicate how the vehicle is running. It shows how fast the vehicle is going, about how much fuel the vehicle has left and many other things needed to drive safely and economically.
3-24 Instrument Panel Speedometer and Odometer The speedometer shows the vehicle’s speed in both miles per hour (mph) and kilometers per hour (km/h). The odometer shows how far the vehicle has been driven, in either miles or kilometers. If the vehicle needs a new odometer installed, the new one is set to the mileage total of the old odometer. If it cannot, it will be set at zero and a label must be put on the driver’s door to show the old mileage reading when the new odometer was installed.
Instrument Panel Passenger Safety Belt Reminder Light Several seconds after the engine is started, a chime sounds for several seconds to remind the front passenger to buckle their safety belt. This only occurs if the passenger airbag is enabled. See Passenger Sensing System on page 1-49 for more information. The passenger safety belt light, located on the instrument panel, comes on and stays on for several seconds and then flashes for several more.
3-26 Instrument Panel If the airbag readiness light stays on after the vehicle is started or comes on while driving, the airbag system may not work properly. Have the vehicle serviced right away. The airbag readiness light should flash for a few seconds when the engine is started. If the light does not come on then, have it fixed immediately. If there is a problem with the airbag system, an airbag Driver Information Center (DIC) message may also come on.
Instrument Panel { CAUTION If the airbag readiness light ever comes on and stays on, it means that something may be wrong with the airbag system. To help avoid injury to yourself or others, have the vehicle serviced right away. See Airbag Readiness Light on page 3-25 for more information, including important safety information. If the light stays on, or comes on while driving, there could be a problem with the electrical charging system. Have it checked by your dealer/retailer.
3-28 Instrument Panel Antilock Brake System (ABS) Warning Light For vehicles with the Antilock Brake System (ABS), this light should come on briefly as the engine is started. If it does not come on have the vehicle serviced by your dealer/retailer. If the ABS light stays on longer than a few seconds after engine is started, or comes on and stays on while driving, try resetting the system. To reset the system: 1. While driving, pull over when it is safe to do so. 2. Place the vehicle in P (PARK). 3.
Instrument Panel TCS and/or StabiliTrak system automatically turns off and vehicle needs service. When this light is on, the TCS system does not limit wheel spin and/or the StabiliTrak system does not assist with vehicle control. When the Traction Control system and/or StabiliTrak system are turned off, the light comes on. Engine Coolant Temperature Warning Light The engine coolant temperature light should come on briefly as the engine is started.
3-30 Instrument Panel Warnings and Messages on page 3-42 for more information. Stop and check the tires as soon as it is safe to do so. If underinflated, inflate to the proper pressure. See Tires on page 5-38 for more information. When the Light Flashes First and Then is On Steady This indicates that there could be a problem with the Tire Pressure Monitor System. The light flashes for about a minute and stays on steady for the remainder of the ignition cycle.
Instrument Panel Notice: Modifications made to the engine, transmission, exhaust, intake, or fuel system of the vehicle or the replacement of the original tires with other than those of the same Tire Performance Criteria (TPC) can affect the vehicle’s emission controls and can cause this light to come on. Modifications to these systems could lead to costly repairs not covered by the vehicle warranty. This could also result in a failure to pass a required Emission Inspection/Maintenance test.
3-32 Instrument Panel • Make sure to fuel the vehicle with quality fuel. Poor fuel quality causes the engine not to run as efficiently as designed and may cause: stalling after start-up, stalling when the vehicle is changed into gear, misfiring, hesitation on acceleration, or stumbling on acceleration. These conditions might go away once the engine is warmed up. If one or more of these conditions occurs, change the fuel brand used.
Instrument Panel Oil Pressure Light { CAUTION Do not keep driving if the oil pressure is low. The engine can become so hot that it catches fire. Someone could be burned. Check the oil as soon as possible and have the vehicle serviced. Notice: Lack of proper engine oil maintenance can damage the engine. The repairs would not be covered by the vehicle warranty. Always follow the maintenance schedule in this manual for changing engine oil.
3-34 Instrument Panel Highbeam On Light Fuel Gage • It takes a little more or less fuel to fill up than the fuel gage indicates. • The gage moves a little while turning a corner or accelerating. The highbeam on light comes on when the high-beam headlamps are in use. See Headlamp High/Low-Beam Changer on page 3-7 for more information.
Instrument Panel This light also comes on when the fuel tank is low on fuel. When fuel is added, the light should go off. If it does not, have the vehicle serviced. Charge/Assist Gage Auto Stop Mode United States Canada This mark on the tachometer signifies that the engine is in Auto Stop mode which is a fuel saving operation. When the vehicle is off, the tachometer needle moves to OFF. If the driver’s door is opened while in Auto Stop, a chime sounds.
3-36 Instrument Panel Driver Information Center (DIC) Your vehicle has a Driver Information Center (DIC). All information appears in the DIC display located in the instrument panel cluster. The DIC comes on when the ignition is on. After a short delay, the DIC displays the information that was last displayed before the engine was turned off. The DIC displays trip, fuel, and vehicle system information, and warning messages if a system problem is detected.
Instrument Panel T (Vehicle Information): Press this button to display the oil life, units, tire pressure readings for vehicles with the Tire Pressure Monitor System (TPMS), Remote Keyless Entry (RKE) transmitter programming, economy light on/off, compass zone setting, and compass recalibration on vehicles with this feature. U (Customization): Press this button to customize the feature settings on your vehicle. See DIC Vehicle Customization on page 3-49 for more information.
3-38 Instrument Panel amount of fuel is in the fuel tank. This is because different driving conditions produce different fuel economies. Generally, freeway driving produces better fuel economy than city driving. Fuel range cannot be reset. If the vehicle is low on fuel, the FUEL LEVEL LOW message will be displayed. See “FUEL LEVEL LOW” under DIC Warnings and Messages on page 3-42. Average Fuel Economy Press the trip/fuel button until AVERAGE FUEL ECONOMY displays.
Instrument Panel oil life system monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule in this manual. See Scheduled Maintenance on page 6-3 for more information. Units Press the vehicle information button until UNITS displays. This display allows you to select between English or Metric units of measurement. Once in this display, press the set/reset button to select between ENGLISH or METRIC units.
3-40 Instrument Panel 4. To match additional transmitters at this time, repeat Step 3. Each vehicle can have a maximum of eight transmitters matched to it. be available when the vehicle is in P (Park). Once in the display, press the set/reset button to select ON or OFF. 5. To exit the programming mode, you must cycle the key to LOCK/OFF. This display shows no information. Compass Zone Setting This display allows for setting the compass zone. See DIC Compass on page 3-40 for more information.
Instrument Panel 5. If calibration is necessary, calibrate the compass. See “Compass Calibration Procedure” following. Compass Calibration 2. Find the vehicle’s current location and variance zone number on the map. Zones 1 through 15 are available. 3. Press and hold the set/reset button to scroll through and select the appropriate variance zone. 4. Press the trip/fuel button until the vehicle heading, for example, N for North, is displayed in the DIC. The compass can be manually calibrated.
3-42 Instrument Panel 3. Press the set/reset button to start the compass calibration. 4. The DIC will display CALIBRATING COMPASS: TURN IN CIRCLES. Drive the vehicle in tight circles at less than 5 mph (8 km/h) to complete the calibration. The DIC will display COMPASS CALIBRATION COMPLETE for a few seconds when the calibration is complete. The DIC display will then return to the previous menu.
Instrument Panel Acknowledging this message will not reset the OIL LIFE REMAINING display. That must be done at the OIL LIFE screen. See “OIL LIFE” under DIC Operation and Displays on page 3-36 and Engine Oil Life System on page 5-14 for more information. CHANGE TRANSMISSION FLUID Notice: Use of the incorrect automatic transmission fluid may damage the vehicle, and the damages may not be covered by the vehicle’s warranty.
3-44 Instrument Panel ENGINE HOT A/C (Air Conditioning) OFF This message displays when the engine coolant becomes hotter than the normal operating temperature. To avoid added strain on a hot engine, the air conditioning compressor is automatically turned off. When the coolant temperature returns to normal, the A/C operation automatically resumes. You can continue to drive your vehicle. ENGINE OIL LOW: ADD OIL Your vehicle may have an engine oil level sensor.
Instrument Panel FUEL LEVEL LOW This message displays when your vehicle is low on fuel. Refill the fuel tank as soon as possible. See Fuel Gage on page 3-34 and Filling the Tank on page 5-7 for more information. HOOD OPEN This message displays on some vehicles when the hood is not closed properly. Close the hood completely. See Hood Release on page 5-9. ICE POSSIBLE DRIVE WITH CARE This message displays when the outside air temperature is cold enough to create icy road conditions.
3-46 Instrument Panel REMOTE KEY LEARNING COMPLETE SERVICE A/C (Air Conditioning) SYSTEM This message displays while matching a Remote Keyless Entry (RKE) transmitter to your vehicle. See “MATCHING TRANSMITTERS TO YOUR VEHICLE” under Remote Keyless Entry (RKE) System Operation on page 2-4 and DIC Operation and Displays on page 3-36 for more information. This message displays when there is a problem detected in the air conditioning system. Have the vehicle serviced by your dealer/retailer.
Instrument Panel SERVICE STABILITRAK This message displays if there has been a problem detected with StabiliTrak®. A warning light also appears on the instrument panel cluster. See StabiliTrak®/ Traction Control System (TCS) Warning Light on page 3-28. See StabiliTrak® System on page 4-7 for more information. If this message turns on while you are driving, pull off the road as soon as possible and stop carefully. Try resetting the system by turning the ignition off and then back on.
3-48 Instrument Panel STABILITRAK NOT READY If your vehicle has StabiliTrak, this message may display and the StabiliTrak indicator light on the instrument panel cluster may be on after first driving the vehicle and exceeding 20 mph (32 km/h) for 30 seconds. The StabiliTrak system is not functional until the light has turned off. See StabiliTrak® System on page 4-7 for more information.
Instrument Panel Any of the following conditions may cause the TCS to turn off: • The TCS is turned off by pressing the TCS/StabiliTrak button. See StabiliTrak® System on page 4-7 for more information. • The battery is low. • There is a TCS failure. See your dealer/retailer for service. TRACTION CONTROL ON This message displays when the Traction Control System (TCS) turns on. See StabiliTrak® System on page 4-7 for more information.
3-50 Instrument Panel To change customization preferences, use the following procedure. Entering the Feature Settings Menu 1. Turn the ignition on and place the vehicle in P (Park). To avoid excessive drain on the battery, it is recommended that the headlamps are turned off. 2. Press the customization button to scroll through the available customizable options.
Instrument Panel AT VEHICLE SPEED: The doors will automatically lock when the vehicle speed is above 8 mph (13 km/h) for three seconds. NO CHANGE: No change will be made to this feature. The current setting will remain. To select a setting, press the set/reset button while the desired setting is displayed on the DIC. AUTO DOOR UNLOCK This feature allows you to select whether or not to turn off the automatic door unlocking feature.
3-52 Instrument Panel Press the customization button until PRESS V TO SET REMOTE DOOR LOCK appears on the DIC display. Press the set/reset button once to access the settings for this feature. Then press the customization button to scroll through the following settings: VERIFICATION HORN & LIGHTS (default): The exterior lamps will flash when you press the lock button on the RKE transmitter, and the horn will sound when the lock button is pressed again within five seconds of the previous command.
Instrument Panel VERIF NO CHANGE: No change will be made to this feature. The current setting will remain. To select a setting, press the set/reset button while the desired setting is displayed on the DIC. DELAY DOOR LOCK On vehicles with a crew cab, this feature allows you to select whether or not the locking of the vehicle’s doors will be delayed.
3-54 Instrument Panel NO CHANGE: No change will be made to this feature. The current setting will remain. To select a setting, press the set/reset button while the desired setting is displayed on the DIC. APPROACH LIGHTING This feature allows you to select whether or not to have the exterior lights turn on briefly during low light periods after unlocking the vehicle using the Remote Keyless Entry (RKE) transmitter.
Instrument Panel FACTORY SETTINGS EXIT FEATURE SETTINGS This feature allows you to set all of the customization features back to their factory default settings. This feature allows you to exit the feature settings menu. Press the customization button until PRESS V TO RESTORE FACTORY SET appears on the DIC display. Press the set/reset button once to access the settings for this feature.
3-56 Instrument Panel Audio System(s) Determine which radio the vehicle has and read the following pages to become familiar with its features. { CAUTION Taking your eyes off the road for extended periods could cause a crash resulting in injury or death to you or others. Do not give extended attention to entertainment tasks while driving. This system provides access to many audio and non audio listings.
Instrument Panel 4. To increase the time or date do one of the following: • Press the softkey located below the selected tab. • Press ¨SEEK, or \ FWD. • Turn f clockwise. 5. To decrease the time or date do one of the following: • Press ©SEEK or s REV. • Turn f counterclockwise. The date does not automatically display. To see the date press H while the radio is on. The date with display times out after a few seconds and goes back to the normal radio and time display.
3-58 Instrument Panel To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/day/year to day/month/year: Radio(s) 1. Press MENU, and then the softkey below the H tab. The HR, MIN, MM, DD, YYYY displays. 2. Press the softkey below the forward arrow tab. The time 12H and 24H, and the date MM/DD/YYYY (month, day, and year) and DD/MM/YYYY (day, month, and year) displays. 3. Press the softkey located below the desired option. 4.
Instrument Panel the radio features to work improperly. If this happens, contact the radio station. The radio only seeks and scans stations with a strong signal that are in the selected band. Playing the Radio 4 (Information) (XM™ Satellite O (Power/Volume): Press to turn the system on and off. Turn to increase or decrease the volume. Finding a Station BAND: Press to switch between AM, FM, or XM™ (if equipped). f (Tune): Turn to select radio stations.
3-60 Instrument Panel The number of favorites pages can be setup using the MENU button. To setup the number of favorites pages: 1. Press the MENU button to display the radio setup menu. 2. Press the pushbutton located below the FAV 1-6 label. 3. Select the desired number of favorites pages by pressing the pushbutton located below the displayed page numbers. 4.
Instrument Panel Turn the f knob clockwise or counterclockwise to adjust the highlighted setting. The highlighted setting can also be adjusted by pressing either SEEK arrow, \ FWD, or s REV until the desired levels are obtained. Finding a Category (CAT) Station To quickly adjust balance or fade to the middle position, press the pushbutton positioned under the BAL or FADE label for more than two seconds. A beep sounds and the level adjusts to the middle position. 1.
3-62 Instrument Panel Removed categories can be restored by pressing the pushbutton under the Add tab when a removed category is displayed or by pressing the pushbutton under the Restore All tab. The radio does not allow categories to be removed or added while the vehicle is moving faster than 5 mph (8 km/h). XM™ Satellite Radio Service XM is a satellite radio service that is based in the 48 contiguous United States and 10 Canadian provinces.
Instrument Panel 3-63 To insert multiple CDs: Care of CDs Care of the CD Player 1. Press and hold the ^ button for two seconds. A beep sounds and Load All Discs displays. If playing a CD-R, the sound quality can be reduced due to CD-R quality, the method of recording, the quality of the music that has been recorded, and the way the CD-R has been handled. Handle them carefully. Store CD-R(s) in their original cases or other protective cases and away from direct sunlight and dust.
3-64 Instrument Panel Z EJECT: To eject the CD that is currently playing, press and release this button. A beep sounds and Ejecting Disc displays. Once the disc is ejected, Remove Disc displays. The CD can be removed. If the CD is not removed, after several seconds, the CD automatically pulls back into the player and begins playing. For the Six-Disc CD player, press and hold Z for two seconds to eject all discs. f (Tune): Turn to select tracks on the CD currently playing.
Instrument Panel Press the CD/AUX button again and the system begins playing audio from the connected portable audio player. If a portable audio player is not connected, “No Input Device Found” displays. Playing an MP3 CD-R or CD-RW Disc The vehicle’s radio system may have the MP3 feature. If it has this feature, it is capable of playing an MP3 CD-R or CD-RW disc. For more information on how to play an MP3 CD-R or CD-RW disc, see Using an MP3 on page 3-66 later in this section.
3-66 Instrument Panel O (Power/Volume): Turn to increase or decrease the volume of the portable player. Additional volume adjustments might have to be made from the portable device if the volume is not loud or soft enough. BAND: Press to listen to the radio when a portable audio device is playing. The portable audio device continues playing. CD/AUX (CD/Auxiliary): Press to play a CD when a portable audio device is playing.
Instrument Panel • Make sure playlists have a .mp3 or .wpl extension, other file extensions may not work. • Minimize the length of the file, folder or playlist names. Long file, folder, or playlist names, or a combination of a large number of files and folders, or playlists can cause the player to be unable to play up to the maximum number of files, folders, playlists, or sessions. To play a large number of files, folders, playlists or sessions, minimize the length of the file, folder, or playlist name.
3-68 Instrument Panel Order of Play File System and Naming Playing an MP3 Tracks recorded to the CD-R or CD-RW are played in the following order: The song name that is displayed is the song name that is contained in the ID3 tag. If the song name is not present in the ID3 tag, then the radio displays the file name without the extension (such as .mp3) as the track name.
Instrument Panel CD-RW is not removed, after several seconds, the CD-R or CD-RW automatically pulls back into the player and begins playing. S c (Previous Folder): For the Six-Disc CD player, press and hold this button for two seconds to eject all discs. c T (Next Folder): Press the pushbutton positioned under the Folder label to go to the first track in the next folder. f (Tune): Turn to select MP3 files on the CD-R or CD-RW currently playing.
3-70 Instrument Panel h (Music Navigator): Use the music navigator feature to play MP3 files on the CD-R or CD-RW in order by artist or album. Press the pushbutton located below the music navigator label. The player scans the disc to sort the files by artist and album ID3 tag information. It can take several minutes to scan the disc depending on the number of MP3 files recorded to the CD-R or CD-RW. The radio can begin playing while it is scanning the disc in the background.
Instrument Panel XM Radio Messages XL (Explicit Language Channels): These channels, or any others, can be blocked at a customer’s request, by calling 1-800-852-XMXM (9696). XM Updating: The encryption code in the receiver is being updated, and no action is required. This process should take no longer than 30 seconds. No XM Signal: The system is functioning correctly, but the vehicle is in a location that is blocking the XM™ signal. When the vehicle is moved into an open area, the signal should return.
3-72 Instrument Panel Check XM Receivr: If this message does not clear within a short period of time, the receiver could have a fault. Consult with your dealer/retailer. XM Not Available: If this message does not clear within a short period of time, the receiver could have a fault. Consult with your dealer/retailer. Bluetooth® Vehicles with a Bluetooth system can use a Bluetooth capable cell phone with a Hands Free Profile to make and receive phone calls.
Instrument Panel Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls will be made using OnStar® Hands-Free Calling, if available. Refer to the OnStar owner’s guide for more information. Pairing Information: • Up to five cell phones can be paired to the in-vehicle Bluetooth system. • The pairing process is disabled when the vehicle is moving.
3-74 Instrument Panel Listing All Paired and Connected Phones 1. Press and hold J / 0 for two seconds. The system responds with “Ready” followed by a tone. 2. Say “Bluetooth”. The system responds with “Bluetooth ready” followed by a tone. 3. Say “List”. The system lists all the paired Bluetooth devices. If a phone is connected to the vehicle, the system will say “Is connected” after the connected phone. Deleting a Paired Phone 1. Press and hold J / 0 for two seconds.
Instrument Panel Using the Store Command The store command allows a phone number to be stored without entering the digits individually. 1. Press and hold J / 0 for two seconds. The system responds with “Ready” followed by a tone. 2. Say “Store”. The system responds with “Store, number please” followed by a tone. 3. Say the complete phone number to be stored at once with no pauses. • If the system recognizes the number it responds with “OK, Storing” and repeats the phone number.
3-76 Instrument Panel 3. Say the first digit to be stored. The system will repeat back the digit it heard followed by a tone. Continue entering digits until the number to be stored is complete. • If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number. • To hear all of the numbers recognized by the system, say “Verify” at any time and the system will repeat them. 4. After the complete number has been entered, say “Store”.
Instrument Panel 3. Say the name tag to be deleted. The system responds with “Would you like to delete, ? Please say yes or no”. • If the name tag is correct, say “Yes” to delete the name tag. The system responds with “OK, deleting , returning to the main menu.” • If the name tag is incorrect, say “No”. The system responds with “No. OK, let’s try again, please say the name tag.” To use the delete all name tags command: 1. Press and hold J / 0 for two seconds.
3-78 Instrument Panel Using the Digit Dial Command 1. Press and hold J / 0 for two seconds. The system responds with “Ready” followed by a tone. 2. Say “Digit Dial”. The system responds with “Digit dial using , please say the first digit to dial” followed by a tone. 3. Say the digit to be dialed one at a time. Following each digit, the system will repeat back the digit it heard followed by a tone. 4. Continue entering digits until the number to be dialed is complete.
Instrument Panel Once connected, the person called will be heard through the audio speakers. • To ignore the incoming call, Receiving a Call • Press − / K to disconnect the When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle. • Press J / 0 and begin speaking to answer the call. • Press − / K to ignore a call. Call Waiting Call waiting must be supported on the Bluetooth phone and enabled by the wireless service carrier to work.
3-80 Instrument Panel Transferring a Call Audio can be transferred between the in-vehicle Bluetooth system and the cell phone. To Transfer Audio to the Cell Phone During a call with the audio in the vehicle: 1. Press J / 0. The system responds with “Ready” followed by a tone. 2. Say “Transfer Call.” The system responds with “Transferring call” and the audio will switch from the vehicle to the cell phone.
Instrument Panel 3. Say the number to send. • If the system clearly recognizes the number it responds with “OK, Sending Number” and the dial tones are sent and the call continues. • If the system is not sure it recognized the number properly, it responds “Dial Number, Please say yes or no?” followed by a tone. If the number is correct, say “Yes”. The system responds with “OK, Sending Number” and the dial tones are sent and the call continues. Sending a Stored Name Tag During a Call 1. Press J / 0.
3-82 Instrument Panel This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: Audio Steering Wheel Controls For vehicles with Bluetooth®, press to end a call, or cancel an incoming call. 1. This device may not cause interference. v + v −(Volume): Move the thumbwheel up or down to increase or to decrease the volume. 2. This device must accept any interference received, including interference that may cause undesired operation of the device.
Instrument Panel 3-83 Radio Reception FM Stereo Cellular Phone Usage Frequency interference and static can occur during normal radio reception if items such as cell phone chargers, vehicle convenience accessories, and external electronic devices are plugged into the accessory power outlet. If there is interference or static, unplug the item from the accessory power outlet. FM signals only reach about 10 to 40 miles (16 to 65 km).
3-84 Instrument Panel Fixed Mast Antenna Chime Level Adjustment The fixed mast antenna can withstand most car washes without being damaged as long as it is securely attached to the base. If the mast becomes slightly bent, straighten it out by hand. If the mast is badly bent, replace it. The radio may be used to adjust the vehicle’s chime level. If the radio can be used to change the volume level of the chime, press and hold the sixth FAV softkey with the ignition on and the radio power off.
Driving Your Vehicle Driving Your Vehicle Your Driving, the Road, and the Vehicle Driving Your Vehicle ...........4-1 Driver Behavior ...................4-2 Driving Environment ............4-2 Vehicle Design ...................4-2 Driving for Better Fuel Economy ...........................4-3 Defensive Driving ................4-3 Drunk Driving .....................4-4 Control of a Vehicle ............4-4 Braking ...............................4-5 Antilock Brake System (ABS) ...................
4-2 Driving Your Vehicle Driver Behavior Driving Environment The single most important thing is this: everyone in the vehicle, including the driver, should buckle up. See Safety Belts: They Are for Everyone on page 1-10. In fact, most serious injuries and fatalities to unbelted occupants can be reduced or prevented by the use of safety belts. In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt.
Driving Your Vehicle Driving for Better Fuel Economy • Always follow posted speed limits Driving habits can affect fuel mileage. Here are some driving tips to get the best fuel economy possible. • Keep vehicle tires properly • Avoid fast starts and accelerate smoothly. • Brake gradually and avoid abrupt stops. • Avoid idling the engine for long periods of time. • When road and weather conditions are appropriate, use cruise control, if equipped. or drive more slowly when conditions require.
4-4 Driving Your Vehicle Drunk Driving { CAUTION Drinking and then driving is very dangerous. Your reflexes, perceptions, attentiveness, and judgment can be affected by even a small amount of alcohol. You can have a serious — or even fatal — collision if you drive after drinking. Do not drink and drive or ride with a driver who has been drinking. Ride home in a cab; or if you are with a group, designate a driver who will not drink.
Driving Your Vehicle Braking See Brake System Warning Light on page 3-27. Braking action involves perception time and reaction time. Deciding to push the brake pedal is perception time. Actually doing it is reaction time. Average reaction time is about three-fourths of a second. But that is only an average. It might be less with one driver and as long as two or three seconds or more with another. Age, physical condition, alertness, coordination, and eyesight all play a part.
4-6 Driving Your Vehicle Antilock Brake System (ABS) This vehicle has the Antilock Brake System (ABS), an advanced electronic braking system that helps prevent a braking skid. When the engine is started and the vehicle begins to drive away, ABS checks itself. A momentary motor or clicking noise might be heard while this test is going on, and it might even be noticed that the brake pedal moves a little. This is normal. If there is a problem with ABS, this warning light stays on.
Driving Your Vehicle StabiliTrak® System The vehicle has a vehicle stability enhancement system called StabiliTrak which combines antilock brake, traction and stability control systems and helps the driver maintain directional control of the vehicle in most driving conditions. StabiliTrak activates when the computer senses a discrepancy between the intended path and the direction the vehicle is actually traveling.
4-8 Driving Your Vehicle It is recommended to leave the system on for normal driving conditions, but it may be necessary to turn the system off if the vehicle is stuck in sand, mud, ice or snow, and you want to “rock” the vehicle to attempt to free it. StabiliTrak may also turn off automatically if it determines that a problem exists with the system. The TCS/StabiliTrak warning light will be on solid to warn the driver that StabiliTrak is disabled and requires service.
Driving Your Vehicle attempt to free it. See Rocking Your Vehicle to Get It Out on page 4-17 and If Your Vehicle is Stuck in Sand, Mud, Ice, or Snow on page 4-17 for more information. The TCS/StabiliTrak® button is located on the instrument panel. Press and release this button to turn off TCS. The TCS warning light will be displayed on the instrument panel. The traction control system can be turned back on by pressing the TCS/StabiliTrak button.
4-10 Driving Your Vehicle Try to adjust the speed so you can drive through the curve. Maintain a reasonable, steady speed. Wait to accelerate until out of the curve, and then accelerate gently into the straightaway. collision. Then steer around the problem, to the left or right depending on the space available. Off-Road Recovery Steering in Emergencies There are times when steering can be more effective than braking.
Driving Your Vehicle Ease off the accelerator and then, if there is nothing in the way, steer so that the vehicle straddles the edge of the pavement. Turn the steering wheel 3 to 5 inches, 8 to 13 cm, (about one-eighth turn) until the right front tire contacts the pavement edge. Then turn the steering wheel to go straight down the roadway. Passing Passing another vehicle on a two-lane road can be dangerous.
4-12 Driving Your Vehicle If the vehicle starts to slide, ease your foot off the accelerator pedal and quickly steer the way you want the vehicle to go. If you start steering quickly enough, the vehicle may straighten out. Always be ready for a second skid if it occurs. Of course, traction is reduced when water, snow, ice, gravel, or other material is on the road. For safety, slow down and adjust your driving to these conditions.
Driving Your Vehicle Driving in Rain and on Wet Roads Rain and wet roads can reduce vehicle traction and affect your ability to stop and accelerate. Always drive slower in these types of driving conditions and avoid driving through large puddles and deep-standing or flowing water. { CAUTION Wet brakes can cause crashes. They might not work as well in a quick stop and could cause pulling to one side. You could lose control of the vehicle.
4-14 Driving Your Vehicle Before Leaving on a Long Trip To prepare your vehicle for a long trip, consider having it serviced by your dealer/retailer before departing.
Driving Your Vehicle { CAUTION Coasting downhill in N (Neutral) or with the ignition off is dangerous. The brakes will have to do all the work of slowing down and they could get so hot that they would not work well. You would then have poor braking or even none going down a hill. You could crash. Always have the engine running and the vehicle in gear when going downhill. • Stay in your own lane. Do not swing wide or cut across the center of the road. Drive at speeds that let you stay in your own lane.
4-16 Driving Your Vehicle Blizzard Conditions Being stuck in snow can be a serious situation. Stay with the vehicle unless there is help nearby. If possible, use the Roadside Assistance Program on page 7-5. To get help and keep everyone in the vehicle safe: • Turn on the Hazard Warning Flashers on page 3-5. • Tie a red cloth to an outside mirror. { CAUTION Snow can trap engine exhaust under the vehicle. This may cause exhaust gases to get inside.
Driving Your Vehicle Repeat this until help arrives but only when you feel really uncomfortable from the cold. Moving about to keep warm also helps. If it takes some time for help to arrive, now and then when you run the engine, push the accelerator pedal slightly so the engine runs faster than the idle speed. This keeps the battery charged to restart the vehicle and to signal for help with the headlamps. Do this as little as possible to save fuel.
4-18 Driving Your Vehicle Loading the Vehicle It is very important to know how much weight your vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo, and all nonfactory-installed options. Two labels on your vehicle show how much weight it may properly carry, the Tire and Loading Information label and the Certification/Tire label.
Driving Your Vehicle The Tire and Loading Information label also shows the size of the original equipment tires (C) and the recommended cold tire inflation pressures (D). For more information on tires and inflation see Tires on page 5-38 and Inflation - Tire Pressure on page 5-43. There is also important loading information on the vehicle Certification/Tire label. It tells you the Gross Vehicle Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for the front and rear axle.
4-20 Driving Your Vehicle Example 1 A. Vehicle Capacity Weight for Example 1 = 1,000 lbs (453 kg). B. Subtract Occupant Weight 150 lbs (68 kg) × 2 = 300 lbs (136 kg). C. Available Occupant and Cargo Weight = 700 lbs (317 kg). Example 2 A. Vehicle Capacity Weight for Example 2 = 1,000 lbs (453 kg). B. Subtract Occupant Weight 150 lbs (68 kg) × 5 = 750 lbs (340 kg). C. Available Cargo Weight = 250 lbs (113 kg). Example 3 A. Vehicle Capacity Weight for Example 3 = 1,000 lbs (453 kg). B.
Driving Your Vehicle Certification/Tire Label Label Example A vehicle specific Certification/Tire label is attached to the lower area of the center pillar (B-Pillar). The label shows the gross weight capacity of your vehicle. This is called the Gross Vehicle Weight Rating (GVWR). The GVWR includes the weight of the vehicle, all occupants, fuel, cargo, and trailer tongue weight, if the vehicle is pulling a trailer.
4-22 Driving Your Vehicle If you put things inside your vehicle — like suitcases, tools, packages, or anything else, they will go as fast as the vehicle goes. If you have to stop or turn quickly, or if there is a crash, they will keep going. { CAUTION Things you put inside your vehicle can strike and injure people in a sudden stop or turn, or in a crash. • Put things in the cargo area of your vehicle. Try to spread the weight evenly.
Driving Your Vehicle Recreational Vehicle Towing Recreational vehicle towing means towing the vehicle behind another vehicle – such as behind a motorhome. The two most common types of recreational vehicle towing are known as dinghy towing and dolly towing. Dinghy towing is towing the vehicle with all four wheels on the ground. Dolly towing is towing the vehicle with two wheels on the ground and two wheels up on a device known as a dolly.
4-24 Driving Your Vehicle 3. Shift the transmission to N (Neutral). 4. Turn fog lamps and all accessories off. 5. To prevent the battery from draining while the vehicle is being towed, remove the 2 amp IGN SW fuse from the instrument panel fuse block and store it in a safe location. See Instrument Panel Fuse Block on page 5-76 Notice: If the vehicle is towed without performing each of the steps listed under “Dinghy Towing,” the automatic transmission could be damaged.
Driving Your Vehicle Dolly Towing (Front-Wheel-Drive Vehicles) 4-25 4. Clamp the steering wheel in a straight-ahead position with a clamping device designed for towing. 5. Remove the key from the ignition. 6. Secure the vehicle to the dolly. 7. Release the parking brake. Towing the Vehicle From the Rear To tow the vehicle from the front with the rear wheels on the ground, do the following: 1. Put the front wheels on a dolly. 2. Move the shift lever to P (Park). 3. Set the parking brake.
4-26 Driving Your Vehicle Towing a Trailer { CAUTION The driver can lose control when pulling a trailer if the correct equipment is not used or the vehicle is not driven properly. For example, if the trailer is too heavy, the brakes may not work well — or even at all. The driver and passengers could be seriously injured. The vehicle may also be damaged; the resulting repairs would not be covered by the vehicle warranty. Pull a trailer only if all the steps in this section have been followed.
Driving Your Vehicle Pulling A Trailer Here are some important points: • There are many different laws, including speed limit restrictions, having to do with trailering. Make sure the rig will be legal, not only where you live but also where you will be driving. A good source for this information can be state or provincial police. • Do not tow a trailer at all during the first 500 miles (800 km) the new vehicle is driven. The engine, axle or other parts could be damaged.
4-28 Driving Your Vehicle The effect of additional weight may reduce the trailering capacity more than the total of the additional weight. Weight of the Trailer Tongue The tongue load (A) of any trailer is an important weight to measure because it affects the total gross weight of the vehicle. The Gross Vehicle Weight (GVW) includes the curb weight of the vehicle, any cargo carried in it, and the people who will be riding in the vehicle.
Driving Your Vehicle The weight at the rear axle could be 850 lbs (386 kg) X 1.5 = 1,275 lbs (578 kg). Since the rear axle already weighs 2,700 lbs (1 225 kg), adding 1,275 lbs (578 kg) brings the total to 3,975 lbs (1 803 kg). This is very close to, but within the limit for RGAWR as well. The vehicle is set to trailer up to 8,500 lbs (3 856 kg).
4-30 Driving Your Vehicle • Will any holes be made in the body of the vehicle when the trailer hitch is installed? If so, be sure to seal the holes when the hitch is removed. If they are not sealed, deadly carbon monoxide (CO) from the engine’s exhaust can get into the vehicle. See Engine Exhaust on page 2-26. Sealing the holes will also prevent dirt and water from entering the vehicle. Safety Chains Always attach chains between the vehicle and the trailer.
Driving Your Vehicle CAUTION (Continued) • Adjust the Climate Control system to a setting that brings in only outside air and set the fan speed to the highest setting. See Climate Control System in the Index. For more information about carbon monoxide, see Engine Exhaust on page 2-26. Towing a trailer requires a certain amount of experience. Get to know the rig before setting out for the open road. Get acquainted with the feel of handling and braking with the added weight of the trailer.
4-32 Driving Your Vehicle Turn Signals When Towing a Trailer The arrows on the instrument panel flash whenever signaling a turn or lane change. Properly hooked up, the trailer lamps also flash, telling other drivers the vehicle is turning, changing lanes or stopping. When towing a trailer, the arrows on the instrument panel flash for turns even if the bulbs on the trailer are burned out. For this reason you may think other drivers are seeing the signal when they are not.
Driving Your Vehicle Parking on Hills { CAUTION Parking the vehicle on a hill with the trailer attached can be dangerous. If something goes wrong, the rig could start to move. People can be injured, and both the vehicle and the trailer can be damaged. When possible, always park the rig on a flat surface. If parking the rig on a hill: 1. Press the brake pedal, but do not shift into P (Park) yet. Turn the wheels into the curb if facing downhill or into traffic if facing uphill. 2.
4-34 Driving Your Vehicle ✍ NOTES
Service and Appearance Care Service and Appearance Care Service Service ...............................5-3 Accessories and Modifications .....................5-3 California Proposition 65 Warning ............................5-3 California Perchlorate Materials Requirements .....5-4 Doing Your Own Service Work ....................5-4 Adding Equipment to the Outside of the Vehicle ......5-4 Fuel Fuel ....................................5-5 Gasoline Octane .................5-5 Gasoline Specifications .......
5-2 Service and Appearance Care Tires Tires .................................5-38 Tire Sidewall Labeling .......5-39 Tire Terminology and Definitions .......................5-41 Inflation - Tire Pressure ....5-43 Tire Pressure Monitor System ............................5-45 Tire Pressure Monitor Operation ........................5-46 Tire Inspection and Rotation ..........................5-50 When It Is Time for New Tires .......................5-51 Buying New Tires .............
Service and Appearance Care Service For service and parts needs, visit your dealer/retailer. You will receive genuine Saturn parts and Saturn-trained and supported service people. Genuine Saturn parts have one of these marks.
5-4 Service and Appearance Care California Perchlorate Materials Requirements Certain types of automotive applications, such as airbag initiators, seat belt pretensioners, and lithium batteries contained in remote keyless transmitters, may contain perchlorate materials. Special handling may be necessary. For additional information, see www.dtsc.ca.gov/hazardouswaste/ perchlorate. Doing Your Own Service Work { CAUTION Never try to do your own service on hybrid components.
Service and Appearance Care Fuel Gasoline Specifications Use of the recommended fuel is an important part of the proper maintenance of this vehicle. To help keep the engine clean and maintain optimum vehicle performance, we recommend the use of gasoline advertised as TOP TIER Detergent Gasoline. At a minimum, gasoline should meet ASTM specification D 4814 in the United States or CAN/CGSB-3.5 or 3.511 in Canada.
5-6 Service and Appearance Care For customers who do not use TOP TIER Detergent Gasoline regularly, one bottle of GM Fuel System Treatment PLUS, added to the fuel tank at every engine oil change, can help clean deposits from fuel injectors and intake valves. GM Fuel System Treatment PLUS is the only gasoline additive recommended by General Motors. Also, your dealer/retailer has additives that will help correct and prevent most deposit-related problems.
Service and Appearance Care Filling the Tank { CAUTION { CAUTION Fuel vapor burns violently and a fuel fire can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the pump island. Turn off the engine when you are refueling. Do not smoke if you are near fuel or refueling the vehicle. Do not use cellular phones. Keep sparks, flames, and smoking materials away from fuel. Do not leave the fuel pump unattended when refueling the vehicle.
5-8 Service and Appearance Care This would allow fuel to evaporate into the atmosphere. See Malfunction Indicator Lamp on page 3-30. { CAUTION If a fire starts while you are refueling, do not remove the nozzle. Shut off the flow of fuel by shutting off the pump or by notifying the station attendant. Leave the area immediately. Notice: If you need a new fuel cap, be sure to get the right type. Your dealer/ retailer can get one for you. If you get the wrong type, it might not fit properly.
Service and Appearance Care Checking Things Under the Hood 5-9 Hood Release To open the hood, do the following: { CAUTION An electric fan under the hood can start up and injure you even when the engine is not running. Keep hands, clothing, and tools away from any underhood electric fan. { CAUTION Things that burn can get on hot engine parts and start a fire. These include liquids like fuel, oil, coolant, brake fluid, windshield washer and other fluids, and plastic or rubber.
5-10 Service and Appearance Care Engine Compartment Overview When you open the hood, you will see the following:
Service and Appearance Care A. See Engine Air Cleaner/Filter on page 5-15. B. Remote Negative (−) Terminal. See Jump Starting on page 5-28. C. Engine Oil Fill Cap. See Engine Oil on page 5-11. D. Engine Coolant Surge Tank. See Cooling System on page 5-17. E. Engine Coolant Surge Tank Protection Cap. See Coolant Surge Tank Pressure Cap on page 5-22. F. See Underhood Fuse Block on page 5-77. G. Remote Positive (+) Terminal. See Jump Starting on page 5-28. 5-11 H. Windshield Washer Fluid Reservoir.
5-12 Service and Appearance Care When to Add Engine Oil If the oil is below the MIN (minimum) mark, add at least one quart/liter of the recommended oil. This section explains what kind of oil to use. For engine oil crankcase capacity, see Capacities and Specifications on page 5-81. Notice: Do not add too much oil. If the engine has so much oil that the oil level gets above the upper mark that shows the proper operating range, the engine could be damaged.
Service and Appearance Care • GM6094M Use only an oil that meets GM Standard GM6094M. • SAE 5W-30 SAE 5W-30 is best for the vehicle. These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils such as SAE 20W-50. • American Petroleum Institute (API) starburst symbol Oils meeting these requirements should have the starburst symbol on the container. This symbol indicates that the oil has been certified by the American Petroleum Institute (API).
5-14 Service and Appearance Care Engine Oil Life System When to Change Engine Oil This vehicle has a computer system that indicates when to change the engine oil and filter. This is based on engine revolutions and engine temperature, and not on mileage. Based on driving conditions, the mileage at which an oil change is indicated can vary considerably. For the oil life system to work properly, the system must be reset every time the oil is changed.
Service and Appearance Care What to Do with Used Oil Used engine oil contains certain elements that can be unhealthy for your skin and could even cause cancer. Do not let used oil stay on your skin for very long. Clean your skin and nails with soap and water, or a good hand cleaner. Wash or properly dispose of clothing or rags containing used engine oil. See the manufacturer’s warnings about the use and disposal of oil products. Used oil can be a threat to the environment.
5-16 Service and Appearance Care How to Inspect the Engine Air Cleaner/Filter 3. Remove the four bolts on the side of the air cleaner assembly. To inspect the air cleaner/filter remove the filter from the vehicle and lightly shake the filter to release loose dust and dirt. If the filter remains caked with dirt, a new filter is required. 4. Turn the cover upward to disengage the cover hinges. To inspect or replace the engine air cleaner/filter, do the following: 1.
Service and Appearance Care Automatic Transmission Fluid It is not necessary to check the transmission fluid level. A transaxle fluid leak is the only reason for fluid loss. If a leak occurs, take the vehicle to your dealer/retailer service department and have it repaired as soon as possible. Cooling System When you decide it is safe to lift the hood, here is what you will see: { CAUTION An electric engine cooling fan under the hood can start up even when the engine is not running and can cause injury.
5-18 Service and Appearance Care { CAUTION Heater and radiator hoses, and other engine parts, can be very hot. Do not touch them. If you do, you can be burned. Do not run the engine if there is a leak. If you run the engine, it could lose all coolant. That could cause an engine fire, and you could be burned. Get any leak fixed before you drive the vehicle. Notice: Using coolant other than DEX-COOL® can cause premature engine, heater core, or radiator corrosion.
Service and Appearance Care { CAUTION Adding only plain water to the cooling system can be dangerous. Plain water, or some other liquid such as alcohol, can boil before the proper coolant mixture will. The vehicle’s coolant warning system is set for the proper coolant mixture. With plain water or the wrong mixture, the engine could get too hot but you would not get the overheat warning. The engine could catch fire and you or others could be burned.
5-20 Service and Appearance Care By this time, the coolant level inside the coolant surge tank may be lower. If the level is lower, add more of the proper DEX-COOL® coolant mixture to the coolant surge tank until the level reaches between the MIN and MAX lines. 5. Then replace the pressure cap. Be sure the pressure cap is hand-tight. 3. Fill the coolant surge tank with the proper DEX-COOL® coolant mixture, to between the MIN and MAX lines. 4.
Service and Appearance Care • Protect against rust and corrosion. • Help keep the proper engine temperature. • Let the warning lights and gages work as they should. Notice: Using coolant other than DEX-COOL® can cause premature engine, heater core, or radiator corrosion. In addition, the engine coolant may require changing sooner, at the first maintenance service after each 30,000 miles (50 000 km) or 24 months, whichever occurs first. Any repairs would not be covered by the vehicle warranty.
5-22 Service and Appearance Care Checking Coolant The surge tank is located on the driver side of the engine compartment. See Engine Compartment Overview on page 5-10 for more information on location. { CAUTION { CAUTION Turning the surge tank pressure cap when the engine and radiator are hot can allow steam and scalding liquids to blow out and burn you badly. Never turn the surge tank pressure cap — even a little — when the engine and radiator are hot.
Service and Appearance Care Engine Overheating There is a coolant temperature warning light on your vehicle’s instrument panel. See Engine Coolant Temperature Warning Light on page 3-29. If Steam Is Coming From Your Engine CAUTION (Continued) If you keep driving when your engine is overheated, the liquids in it can catch fire. You or others could be badly burned. Stop your engine if it overheats, and get out of the vehicle until the engine is cool.
5-24 Service and Appearance Care If you no longer have the overheat warning, you can drive. Just to be safe, drive slower for about ten minutes. If the warning does not come back on, you can drive normally. If the warning continues and you have not stopped, pull over, stop, and park your vehicle right away. If there is still no sign of steam, idle the engine for three minutes while you are parked. If the warning continues, turn off the engine and get everyone out of the vehicle until it cools down.
Service and Appearance Care Brakes Brake Fluid The brake master cylinder reservoir is filled with either DOT-3 or DOT-4 brake fluid as indicated on the reservoir cap. See Engine Compartment Overview on page 5-10 for the location of the reservoir. There are only two reasons why the brake fluid level in the reservoir might go down: • The brake fluid level goes down because of normal brake lining wear. When new linings are installed, the fluid level goes back up.
5-26 Service and Appearance Care Always clean the brake fluid reservoir cap and the area around the cap before removing it. This helps keep dirt from entering the reservoir. { CAUTION With the wrong kind of fluid in the brake hydraulic system, the brakes might not work well. This could cause a crash. Always use the proper brake fluid. Notice: • Using the wrong fluid can badly damage brake hydraulic system parts.
Service and Appearance Care Brake Adjustment Every time the brakes are applied, with or without the vehicle moving, the brakes adjust for wear. Replacing Brake System Parts The braking system on a vehicle is complex. Its many parts have to be of top quality and work well together if the vehicle is to have really good braking. The vehicle was designed and tested with top-quality brake parts.
5-28 Service and Appearance Care Extended Storage: For extended storage of the vehicle, remove the 12-volt battery black, negative (−) cable from the battery or use a battery trickle charger. This helps maintain the charge of the battery over an extended period of time. Remember to reconnect the battery when ready to drive the vehicle. Notice: The 36-volt hybrid battery system should be serviced only by a qualified facility to avoid battery system damage. See your dealer/retailer if service is needed.
Service and Appearance Care Notice: Ignoring these steps could result in costly damage to the vehicle that would not be covered by the warranty. Trying to start the vehicle by pushing or pulling it will not work, and it could damage the vehicle. 1. Check the other vehicle. It must have a 12-volt battery with a negative ground system. Notice: If the other vehicle’s system is not a 12-volt system with a negative ground, both vehicles can be damaged.
5-30 Service and Appearance Care A. Remote Negative (-) B.
Service and Appearance Care 5. The remote negative (−) terminal is a stud on the driver side near the underhood fuse block. { CAUTION Using a match near a battery can cause battery gas to explode. People have been hurt doing this, and some have been blinded. Use a flashlight if you need more light. Be sure the battery has enough water. You do not need to add water to the battery installed in your new vehicle. But if a battery has filler caps, be sure the right amount of fluid is there.
5-32 Service and Appearance Care 9. Now connect the black negative (−) cable to the negative (−) terminal of the good battery. Use a remote negative (−) terminal if the vehicle has one. Do not let the other end touch anything until the next step. The other end of the negative (−) cable does not go to the dead battery. It goes to your vehicle’s remote negative (−) terminal. The electrical connection is just as good there, and the chance of sparks getting back to the battery is much less. 10.
Service and Appearance Care Headlamp Aiming The headlamp aiming system has been preset at the factory. • The vehicle should be placed so it is perpendicular to the wall or other flat surface. • The vehicle should not have any If the vehicle is damaged in an accident, the aim of the headlamps may be affected and adjustment may be necessary. • The vehicle should be fully It is recommended that a dealer/retailer adjust the headlamps. To re-aim the headlamps yourself, use the following procedure.
5-34 Service and Appearance Care 6. Turn on the low-beam headlamps and place a piece of cardboard or equivalent in front of the headlamp not being adjusted. This allows only the beam of light from the headlamp being adjusted to be seen on the flat surface. 8. Turn the vertical aiming screw until the headlamp beam is aimed to the horizontal tape line. Turn it clockwise or counterclockwise to raise or lower the angle of the beam. 4.
Service and Appearance Care Bulb Replacement Headlamps For the proper type of replacement bulbs, see Replacement Bulbs on page 5-37. To replace one of the headlamp bulbs, use the following procedure. To replace the parking/turn signal lamp bulb, see Front Turn Signal and Parking Lamps on page 5-36. For any bulb changing procedure not listed in this section, contact your dealer/retailer. Halogen Bulbs { CAUTION Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb.
5-36 Service and Appearance Care Front Turn Signal and Parking Lamps To replace a front turn signal or parking lamp bulb: 1. Follow Steps 1 through 6 under Headlamps on page 5-35 to access the front turn signal or parking lamp. 3. Pull the bulb out of the bulb socket assembly. 4. Push the new bulb into the bulb socket assembly. 5. Insert the bulb assembly into the headlamp assembly. Taillamps, Turn Signal, Stoplamps and Back-up Lamps To replace one of these bulbs: 6.
Service and Appearance Care 1. Open the liftgate. License Plate Lamp To replace one of these bulbs: 1. Remove the two screws holding each of the license plate lamps to the fascia. 5-37 4. Push the new bulb into the bulb socket and turn it clockwise to lock it into place. 5. Push and turn the license plate back through the fascia opening. 6. Reinstall the two screws holding the license plate lamps to the fascia. Replacement Bulbs Exterior Lamp 2. Remove the two screws holding in the taillamp assembly.
5-38 Service and Appearance Care Windshield Wiper Blade Replacement Windshield wiper blades should be inspected for wear and cracking. See Scheduled Maintenance on page 6-3 for more information. Replacement blades come in different types and are removed in different ways. For proper type and length, see Maintenance Replacement Parts on page 6-12. To replace the windshield wiper blade: Tires Your new vehicle comes with high-quality tires made by a leading tire manufacturer.
Service and Appearance Care CAUTION (Continued) • Underinflated tires pose the same danger as overloaded tires. The resulting accident could cause serious injury. Check all tires frequently to maintain the recommended pressure. Tire pressure should be checked when your vehicle’s tires are cold. See Inflation - Tire Pressure on page 5-43. • Overinflated tires are more likely to be cut, punctured, or broken by a sudden impact — such as when you hit a pothole. Keep tires at the recommended pressure.
5-40 Service and Appearance Care The TIN is molded onto both sides of the tire, although only one side may have the date of manufacture. (E) Tire Ply Material: The type of cord and number of plies in the sidewall and under the tread. (F) Uniform Tire Quality Grading (UTQG): Tire manufacturers are required to grade tires based on three performance factors: treadwear, traction and temperature resistance. For more information see Uniform Tire Quality Grading on page 5-54.
Service and Appearance Care Tire Terminology and Definitions Air Pressure: The amount of air inside the tire pressing outward on each square inch of the tire. Air pressure is expressed in pounds per square inch (psi) or kilopascal (kPa). Accessory Weight: This means the combined weight of optional accessories. Some examples of optional accessories are, automatic transmission, power steering, power brakes, power windows, power seats, and air conditioning.
5-42 Service and Appearance Care Intended Outboard Sidewall: The side of an asymmetrical tire, that must always face outward when mounted on a vehicle. Maximum Loaded Vehicle Weight: The sum of curb weight, accessory weight, vehicle capacity weight, and production options weight. Kilopascal (kPa): The metric unit for air pressure. Normal Occupant Weight: The number of occupants a vehicle is designed to seat multiplied by 150 lbs (68 kg). See Loading the Vehicle on page 4-18.
Service and Appearance Care Traction: The friction between the tire and the road surface. The amount of grip provided. Tread: The portion of a tire that comes into contact with the road. Treadwear Indicators: Narrow bands, sometimes called wear bars, that show across the tread of a tire when only 1/16 inch (1.6 mm) of tread remains. See When It Is Time for New Tires on page 5-51.
5-44 Service and Appearance Care This label shows your vehicle’s original equipment tires and the correct inflation pressures for your tires when they are cold. The recommended cold tire inflation pressure, shown on the label, is the minimum amount of air pressure needed to support your vehicle’s maximum load carrying capacity. For additional information regarding how much weight your vehicle can carry, and an example of the Tire and Loading Information label, see Loading the Vehicle on page 4-18.
Service and Appearance Care Tire Pressure Monitor System The Tire Pressure Monitor System (TPMS) uses radio and sensor technology to check tire pressure levels. The TPMS sensors monitor the air pressure in your vehicle’s tires and transmit tire pressure readings to a receiver located in the vehicle.
5-46 Service and Appearance Care Federal Communications Commission (FCC) and Industry and Science Canada The Tire Pressure Monitor System (TPMS) operates on a radio frequency and complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
Service and Appearance Care At the same time a message to check the pressure in a specific tire appears on the Driver Information Center (DIC) display. The low tire pressure warning light and the DIC warning message come on at each ignition cycle until the tires are inflated to the correct inflation pressure. Using the DIC, tire pressure levels can be viewed by the driver.
5-48 Service and Appearance Care TPMS Malfunction Light and Message The TPMS will not function properly if one or more of the TPMS sensors are missing or inoperable. When the system detects a malfunction, the low tire warning light flashes for about one minute and then stays on for the remainder of the ignition cycle. A DIC warning message is also displayed. The low tire warning light and DIC warning message come on at each ignition cycle until the problem is corrected.
Service and Appearance Care You have two minutes to match each tire and wheel position. If it takes longer than two minutes to match any tire and wheel position, the matching process stops and you need to start over. The TPMS matching process is outlined below: 1. Set the parking brake. 2. Turn the ignition switch to ON/RUN with the engine off. 3. Press and hold the Remote Keyless Entry (RKE) transmitter’s LOCK and UNLOCK buttons, at the same time, for about five seconds to start the TPMS learn mode.
5-50 Service and Appearance Care Tire Inspection and Rotation We recommend that you regularly inspect the vehicle’s tires, including the spare tire, for signs of wear or damage. See When It Is Time for New Tires on page 5-51 for more information. Tires should be rotated every 5,000 to 8,000 miles (8 000 to 13 000 km). See Scheduled Maintenance on page 6-3. The purpose of a regular tire rotation is to achieve a uniform wear for all tires on the vehicle.
Service and Appearance Care When It Is Time for New Tires Various factors, such as maintenance, temperatures, driving speeds, vehicle loading, and road conditions influence when you need new tires. You need new tires if any of the following statements are true: • You can see the indicators at three or more places around the tire. • You can see cord or fabric showing through the tire’s rubber. • The tread or sidewall is cracked, cut, or snagged deep enough to show cord or fabric.
5-52 Service and Appearance Care GM’s exclusive TPC Spec system considers over a dozen critical specifications that impact the overall performance of your vehicle, including brake system performance, ride and handling, traction control, and tire pressure monitoring performance. GM’s TPC Spec number is molded onto the tire’s sidewall near the tire size. If the tires have an all-season tread design, the TPC spec number will be followed by a MS, for mud and snow.
Service and Appearance Care Vehicles that have a tire pressure monitoring system could give an inaccurate low-pressure warning if non-TPC Spec rated tires are installed on your vehicle. Non-TPC Spec rated tires may give a low-pressure warning that is higher or lower than the proper warning level you would get with TPC Spec rated tires. See Tire Pressure Monitor System on page 5-45. Your vehicle’s original equipment tires are listed on the Tire and Loading Information label.
5-54 Service and Appearance Care Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A The following information relates to the system developed by the United States National Highway Traffic Safety Administration (NHTSA), which grades tires by treadwear, traction, and temperature performance. This applies only to vehicles sold in the United States.
Service and Appearance Care Temperature – A, B, C The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
5-56 Service and Appearance Care Your dealer/retailer will know the kind of wheel you need. Each new wheel should have the same load-carrying capacity, diameter, width, offset and be mounted the same way as the one it replaces. { CAUTION Using the wrong replacement wheels, wheel bolts, or wheel nuts on your vehicle can be dangerous. It could affect the braking and handling of your vehicle, make your tires lose air and make you lose control.
Service and Appearance Care { CAUTION Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to become loose and even come off. This could lead to a crash. Be sure to use the correct wheel nuts. If you have to replace them, be sure to get new Saturn original equipment wheel nuts. Notice: Improperly tightened wheel nuts can lead to brake pulsation and rotor damage.
5-58 Service and Appearance Care If a Tire Goes Flat This vehicle has a tire sealant and compressor kit. See Tire Sealant and Compressor Kit on page 5-59. There is no spare tire, no tire changing equipment, and no place to store a tire. It is unusual for a tire to blow out while you are driving, especially if you maintain your tires properly. See Tires on page 5-38. If air goes out of a tire, it is much more likely to leak out slowly.
Service and Appearance Care Tire Sealant and Compressor Kit { CAUTION Idling a vehicle in an enclosed area with poor ventilation is dangerous. Engine exhaust may enter the vehicle. Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. Never run the engine in an enclosed area that has no fresh air ventilation. For more information, see Engine Exhaust on page 2-26.
5-60 Service and Appearance Care If the tire has been separated from the wheel, has damaged sidewalls, or has a large puncture, the tire is too severely damaged for the tire sealant and compressor kit to be effective. See Roadside Assistance Program on page 7-5. The kit includes: Tire Sealant Read and follow the safe handling instructions on the label adhered to the sealant canister. Check the tire sealant expiration date on the sealant canister.
Service and Appearance Care Using the Tire Sealant and Compressor Kit to Temporarily Seal and Inflate a Punctured Tire Always do a safety check first. See If a Tire Goes Flat on page 5-58. 1. Remove the tire sealant and compressor kit from its storage location. See Tire Sealant and Compressor Kit Storage on page 5-66. Make sure the on/off button (D) is in the off (O) position. 2. Unwrap the sealant/air hose (F) and the power plug (C). 3. Place the kit on the ground.
5-62 Service and Appearance Care 8. Press the on/off (D) button to turn the tire sealant and compressor kit on. The compressor will inject sealant and air into the tire. The pressure gage (E) will initially show a high pressure while the compressor pushes the sealant into the tire. Once the sealant is completely dispersed into the tire, the pressure will quickly drop and start to rise again as the tire inflates with air only. 9.
Service and Appearance Care 14. Replace the sealant/air hose (F), and the power plug (C) back in their original location. 15. If the flat tire was able to inflate to the recommended inflation pressure, remove the maximum speed label from the sealant canister (B) and place it in a highly visible location. The label is a reminder not to exceed 55 mph (90 km/h) until the damaged tire is repaired or replaced. 16. Return the equipment to its original storage location in the vehicle. 17.
5-64 Service and Appearance Care Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured) To use the air compressor to inflate a tire with air only and not sealant: 2. Unlock the air only hose (F) from the sealant canister (B) by pulling up on the lever. 3. Pull the air only hose (F) from the sealant canister (B). 4. Remove the power plug (C) from the air compressor (A). 5. Place the kit on the ground.
Service and Appearance Care 12. Press the on/off button (D) to turn the tire sealant and compressor kit off. Be careful while handling the tire sealant and compressor kit as it could be warm after usage. Removal and Installation of the Sealant Canister To remove the sealant canister: 15. Replace the air only hose (F) and the power plug (C) back in its original location. 16. Place the equipment in the original storage location in the vehicle. 5.
5-66 Service and Appearance Care Tire Sealant and Compressor Kit Storage 2. Push in the levers and lift the load floor up. Appearance Care Interior Cleaning To access the tire sealant and compressor kit: 1. Open the liftgate. See Liftgate on page 2-8. 3. Turn the retainer counterclockwise and remove the tire sealant and compressor kit. To store the tire sealant and compressor kit, reverse the steps. The vehicle’s interior will continue to look its best if it is cleaned often.
Service and Appearance Care 5-67 When cleaning the vehicle’s interior, only use cleaners specifically designed for the surfaces being cleaned. Permanent damage may result from using cleaners on surfaces for which they were not intended. Use glass cleaner only on glass. Remove any accidental over-spray from other surfaces immediately. To prevent over-spray, apply cleaner directly to the cleaning cloth. Many cleaners contain solvents that may become concentrated in the vehicle’s breathing space.
5-68 Service and Appearance Care Fabric/Carpet Use a vacuum cleaner with a soft brush attachment frequently to remove dust and loose dirt. A canister vacuum with a beater bar in the nozzle may only be used on floor carpet and carpeted floor mats. For any soil, always try to remove it first with plain water or club soda. Before cleaning, gently remove as much of the soil as possible using one of the following techniques: • For liquids: gently blot the remaining soil with a paper towel.
Service and Appearance Care Instrument Panel, Vinyl, and Other Plastic Surfaces A soft cloth dampened with water may be used to remove dust. If a more thorough cleaning is necessary, a clean soft cloth dampened with a mild soap solution can be used to gently remove dust and dirt. Never use spot lifters or removers on plastic surfaces.
5-70 Service and Appearance Care Do not wash the vehicle in direct sunlight. Use a car washing soap. Do not use cleaning agents that are petroleum based or that contain acid or abrasives, as they can damage the paint, metal or plastic on the vehicle. Approved cleaning products can be obtained from your dealer/retailer. Follow all manufacturers’ directions regarding correct product usage, necessary safety precautions and appropriate disposal of any vehicle care product.
Service and Appearance Care Foreign materials such as calcium chloride and other salts, ice melting agents, road oil and tar, tree sap, bird droppings, chemicals from industrial chimneys, etc., can damage the vehicle’s finish if they remain on painted surfaces. Wash the vehicle as soon as possible. If necessary, use non-abrasive cleaners that are marked safe for painted surfaces to remove foreign matter.
5-72 Service and Appearance Care Aluminum Wheels Notice: Chrome wheels and other chrome trim may be damaged if the vehicle is not washed after driving on roads that have been sprayed with magnesium, calcium or sodium chloride. These chlorides are used on roads for conditions such as ice and dust. Always wash the vehicle’s chrome with soap and water after exposure.
Service and Appearance Care 5-73 Sheet Metal Damage Underbody Maintenance Chemical Paint Spotting If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protection. Chemicals used for ice and snow removal and dust control can collect on the underbody.
5-74 Service and Appearance Care Vehicle Identification Vehicle Identification Number (VIN) Service Parts Identification Label This label is on the inside of the glove box. It is very helpful if parts need to be ordered. The label has the following information: • Vehicle Identification This is the legal identifier for the vehicle. It appears on a plate in the front corner of the instrument panel, on the driver side. It can be seen through the windshield from outside the vehicle.
Service and Appearance Care Add-On Electrical Equipment Notice: Do not add anything electrical to the vehicle unless you check with your dealer/retailer first. Some electrical equipment can damage the vehicle and the damage would not be covered by the vehicle’s warranty. Some add-on electrical equipment can keep other components from working as they should. Add-on equipment can drain the vehicle’s battery, even if the vehicle is not operating. The vehicle has an airbag system.
5-76 Service and Appearance Care Instrument Panel Fuse Block The instrument panel fuse block is located on the passenger side of the lower console. Pull the latch of the fuse box cover straight back to access the fuses.
Service and Appearance Care Fuses Usage Inside Rearview ISRVM Mirror Instrument Panel CLUSTER Cluster AIR BAG Airbag System Outside Rearview OSRVM Mirror Capture KEY CAP Key Solenoid Wheel WHL S/W Steering Switch Driver Door F/DR LCK Front Lock Accessory Power APO2 Outlet 2 Body Control BCM (VB3) Module (BCM) (VB3) DR LCK Door Lock Body Control BCM (VB6) Module (VB6) Control BCM (VB4) Body Module (VB4) Fuses BCM (VB5) TRL AIRCON AUDIO BCM (VB7) IGN SW AIR BAG WASHER APO1 FSCM RR CLR BCM (VB2) DRL BCM (VB1
5-78 Service and Appearance Care Fuses ECM ENG-3 ENG-2 ENG-1 HYBRID BEC RUN S/ROOF HTD/SEAT BCM Fuses Usage FAN MAIN Cooling Fan Main REAR/WPR Rear Wiper Motor FAN AUX Cooling Fan Auxiliary Fuses Usage Engine Control Module/Transmission Control ECM/TCM/ Module/Serial Data SGCM Gateway Communication Module STRTR WPR 4WD/ESCM ABS A/C CLTCH BLWR MTR Usage Engine Control Module Engine 3 Engine 2 Engine 1 Hybrid BEC Run Sunroof Module Heated Seat Control Module Body Control Module Starter Motor Windshield
Service and Appearance Care Fuses AMP HORN Usage Amplifier Horn Antilock Brake ABS System Module Instrument Panel I/P BEC Bussed Electrical Center FRT FOG Front Fog Lamps Instrument Panel I/P BEC Bussed Electrical Center Daytime Running DRL Light Turn and T/LAMP RT Right Parking Lamps Turn and T/LAMP LT Left Parking Lamps TRLR Trailer Parking T/LAMP Lamps Passenger Side HDLP HI LT High-Beam Headlamp STOP LP Stoplamps DEFOG Defroster Fog Fuses HDLP LO RT HDLP LO LT HDLP HI RT OSRVM HTR Relays FAN MAIN RLY
5-80 Service and Appearance Care Fuses HYBRID PUMPS HILL HOLD VLVS Usage Hybrid Pumps Hill Hold Valves Auxiliary AUX TRANSPUMP Transmission Pump Relays HILL HOLD VLVS Usage Hill Hold Valves Auxiliary AUX TRANSPUMP Transmission Pump
Service and Appearance Care 5-81 Capacities and Specifications Capacities English Metric For the air conditioning system refrigerant charge amount, see the refrigerant caution label located Air Conditioning Refrigerant R134a under the hood. See your retailer for more information. Cooling System 9.5 qt 9.0 L Engine Oil with Filter 5.0 qt 4.7 L Fuel Tank 18.0 gal 68.1 L Transmission (Bottom Pan Removal) 6.9 qt 6.5 L Wheel Nut Torque 100 ft lb 140 Y All capacities are approximate.
5-82 Service and Appearance Care ✍ NOTES
Maintenance Schedule Maintenance Schedule Maintenance Schedule Introduction .........................6-1 Maintenance Requirements ....................6-1 Your Vehicle and the Environment ......................6-2 Using the Maintenance Schedule ...........................6-2 Scheduled Maintenance ......6-3 Additional Required Services ............................6-5 Maintenance Footnotes .......6-7 Owner Checks and Services ............................6-8 At Each Fuel Fill ................
6-2 Maintenance Schedule Your Vehicle and the Environment Proper vehicle maintenance not only helps to keep the vehicle in good working condition, but also helps the environment. All recommended maintenance is important. Improper vehicle maintenance can even affect the quality of the air we breathe. Improper fluid levels or the wrong tire inflation can increase the level of emissions from the vehicle.
Maintenance Schedule When you go to your dealer/retailer for service, trained and supported service technicians will perform the work using genuine parts. To purchase service information, see Service Publications Ordering Information on page 7-13. Owner Checks and Services on page 6-8 tells what should be checked, when to check it, and what can easily be done to help keep the vehicle in good condition.
6-4 Maintenance Schedule Maintenance I — Use Maintenance I if the Change Engine Oil light displays within 10 months since the vehicle was purchased or Maintenance II was performed. Maintenance II — Use Maintenance II if the previous service performed was Maintenance I. Always use Maintenance II whenever the light displays 10 months or more since the last service or if the light has not come on at all for one year.
Maintenance Schedule 6-5 Scheduled Maintenance (cont’d) Service Maintenance I Maintenance II Inspect wiper blades. See footnote (d). • Inspect restraint system components. See footnote (e). • Lubricate body components. See footnote (f). • Replace passenger compartment air filter. See footnote (k). • Inspect throttle system. See footnote (g).
6-6 Maintenance Schedule Additional Required Services (cont’d) Service and Miles (Kilometers) 25,000 (40 000) 50,000 (80 000) 75,000 (120 000) 100,000 (160 000) Change automatic transmission fluid (normal service). • Replace spark plugs. An Emission Control Service. • 125,000 (200 000) 150,000 (240 000) Engine cooling system service (or every five years, whichever occurs first). An Emission Control Service. See footnote (i). • Inspect engine accessory drive belt. An Emission Control Service.
Maintenance Schedule Maintenance Footnotes (a) Visually inspect brake lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc. Inspect disc brake pads for wear and rotors for surface condition. Inspect other brake parts, including calipers, parking brake, etc. (b) Visually inspect front and rear suspension and steering system for damaged, loose, or missing parts or signs of wear. (c) Visually inspect hoses and have them replaced if they are cracked, swollen, or deteriorated.
6-8 Maintenance Schedule See Engine Coolant on page 5-20 for what to use. Inspect hoses. Clean radiator, condenser, pressure cap, and filler neck. Pressure test the cooling system and pressure cap. (j) A fluid loss in any vehicle system could indicate a problem. Have the system inspected and repaired and the fluid level checked. Add fluid if needed. (k) Or every 12 months, whichever occurs first. If driving regularly under dusty conditions, the filter may require replacement more often.
Maintenance Schedule Windshield Washer Fluid Level Check Check the windshield washer fluid level in the windshield washer fluid reservoir and add the proper fluid if necessary. At Least Once a Month Tire Inspection and Inflation Check Inspect the vehicle’s tires for wear and make sure they are inflated to the correct pressures. See Inflation - Tire Pressure on page 5-43. At Least Once a Year Starter Switch Check { CAUTION When you are doing this inspection, the vehicle could move suddenly.
6-10 Maintenance Schedule shift lever moves out of P (Park), contact your dealer/retailer for service. Ignition Transmission Lock Check While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position. • The ignition should turn to LOCK/OFF only when the shift lever is in P (Park). • The ignition key should come out only in LOCK/OFF. Contact your dealer/retailer if service is required.
Maintenance Schedule 6-11 Recommended Fluids and Lubricants Fluids and lubricants identified below by name, part number, or specification can be obtained from your dealer/retailer.
6-12 Maintenance Schedule Usage Sunroof Track Weatherstrip Conditioning Fluid/Lubricant Lubriplate Lubricant Aerosol (Saturn Part No. 21038869 or GM Part No. U.S. 12346293, in Canada 992723) or lubricant meeting requirements of NLGI #2, Category LB or GC-LB. Weatherstrip Lubricant (GM Part No. U.S. 3634770, in Canada 10953518) or Dielectric Silicone Grease (GM Part No. U.S. 12345579, in Canada 992887).
Maintenance Schedule Engine Drive Belt Routing The engine drive belt on this hybrid vehicle is under a higher tension than the engine drive belt on a non-hybrid vehicle and requires a special tool to service. See your dealer/retailer for service.
6-14 Maintenance Schedule Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. See Maintenance Requirements on page 6-1. Any additional information from Owner Checks and Services on page 6-8 can be added on the following record pages. You should retain all maintenance receipts.
Maintenance Schedule Maintenance Record (cont’d) Date Odometer Reading Serviced By Maintenance I or Maintenance II Services Performed 6-15
6-16 Maintenance Schedule Maintenance Record (cont’d) Date Odometer Reading Serviced By Maintenance I or Maintenance II Services Performed
Customer Assistance Information Customer Assistance Information Customer Assistance and Information Customer Satisfaction Procedure .........................7-1 Online Owner Center ..........7-4 Customer Assistance for Text Telephone (TTY) Users ................................7-4 Customer Assistance Offices ..............................7-5 GM Mobility Reimbursement Program ...7-5 Roadside Assistance Program ............................7-5 Scheduling Service Appointments ....................
7-2 Customer Assistance Information Normally, concerns can be quickly resolved at this level. STEP TWO: Should you need additional assistance, in the U.S., contact the Saturn Customer Assistance Center by calling 1-800-553-6000. In Canada, call the Saturn Customer Communication Centre at 1-800-263-1999.
Customer Assistance Information Contact the BBB Auto Line Program by using the toll-free telephone number or by writing them at the following address: STEP THREE (Canadian Owners): BBB Auto Line Program Council of Better Business Bureaus, Inc. 4200 Wilson Boulevard Suite 800 Arlington, VA 22203-1838 Telephone: 1-800-955-5100 dr.bbb.
7-4 Customer Assistance Information Online Owner Center Online Owner Center (U.S.) — www.gmownercenter.com/ saturn Information and services customized for your specific vehicle — all in one convenient place.
Customer Assistance Information Customer Assistance Offices Saturn encourages customers to call the toll-free number for assistance. If a customer wishes to write to Saturn, the letter should be addressed to: Saturn Customer Assistance Center P.O. Box 33173 Detroit, MI 48232-5173 1-800-553-6000 1-800-833-6000 (For Text Telephone devices (TTYs)) Roadside Assistance: 1-800-553-6000 In Canada, write to: Saturn Customer Communication Centre General Motors of Canada Ltd.
7-6 Customer Assistance Information • Model, year, color, and license plate number of the vehicle • Odometer reading, Vehicle Identification Number (VIN), and delivery date of the vehicle • Description of the problem Coverage Services are provided up to 5 years/ 100,000 miles (160 000 km), whichever comes first. In the U.S., anyone driving the vehicle is covered. In Canada, a person driving the vehicle without permission from the owner is not covered.
Customer Assistance Information • Mounting, dismounting or changing of snow tires, chains, or other traction devices. • Towing or services for vehicles driven on a non-public road or highway. Services Specific to Canadian Purchased Vehicles • Fuel delivery: Reimbursement is approximately $5 Canadian. Diesel fuel delivery may be restricted. Propane and other fuels are not provided through this service. • Lock-Out Service: Vehicle registration is required.
7-8 Customer Assistance Information Courtesy Transportation Transportation Options To enhance your ownership experience, we and our participating retailers are proud to offer Courtesy Transportation, a customer support program for vehicles with the Bumper to Bumper (Base Warranty Coverage period in Canada), extended powertrain, and hybrid specific warranties in both the U.S. and Canada. Warranty service can generally be completed while you wait.
Customer Assistance Information and meet state/ provincial, local, and rental vehicle provider requirements. Requirements vary and may include minimum age requirements, insurance coverage, credit card, etc. You are responsible for fuel usage charges and may also be responsible for taxes, levies, usage fees, excessive mileage, or rental usage beyond the completion of the repair. It may not be possible to provide a like-vehicle as a courtesy rental.
7-10 Customer Assistance Information may not perform properly in subsequent collisions. Aftermarket parts are not covered by your GM New Vehicle Limited Warranty, and any vehicle failure related to such parts are not covered by that warranty. Repair Facility We recommend that you choose a collision repair facility that meets your needs before you ever need collision repairs.
Customer Assistance Information • If you need roadside assistance, call GM Roadside Assistance. See Roadside Assistance Program on page 7-5 for more information. • If your vehicle cannot be driven, know where the towing service will be taking it. Get a card from the tow truck operator or write down the driver’s name, the service’s name, and the phone number. • Remove any valuables from your vehicle before it is towed away.
7-12 Customer Assistance Information Insurance pays the bill for the repair, but you must live with the repair. Depending on your policy limits, your insurance company may initially value the repair using aftermarket parts. Discuss this with your repair professional, and insist on Genuine GM parts. Remember if your vehicle is leased you may be obligated to have the vehicle repaired with Genuine GM parts, even if your insurance coverage does not pay the full cost.
Customer Assistance Information Reporting Safety Defects to Saturn Service Publications Ordering Information In addition to notifying NHTSA (or Transport Canada) in a situation like this, please notify Saturn.
7-14 Customer Assistance Information Bulletins cover various subjects. Some pertain to the proper use and care of your vehicle. Some describe costly repairs. Others describe inexpensive repairs which, if done on time with the latest parts, may avoid future costly repairs. Some bulletins tell a technician how to repair a new or unexpected condition. Others describe a quicker way to fix your vehicle. They can help a technician service your vehicle better.
Customer Assistance Information This data can help provide a better understanding of the circumstances in which crashes and injuries occur. Important: EDR data is recorded by your vehicle only if a non-trivial crash situation occurs; no data is recorded by the EDR under normal driving conditions and no personal data (e.g., name, gender, age, and crash location) is recorded.
7-16 Customer Assistance Information ✍ NOTES
INDEX A About Driving Your Vehicle ......... ii Accessories and Modifications ...................... 5-3 Accessory Power Outlets ...... 3-16 Adding Equipment to Your Airbag-Equipped Vehicle .... 1-55 Additives, Fuel ...................... 5-5 Add-On Electrical Equipment ....................... 5-75 Air Cleaner/Filter, Engine ....... 5-15 Air Conditioning ................... 3-17 Airbag Passenger Status Indicator ....................... 3-26 Readiness Light ................ 3-25 Airbag System ..............
i-2 INDEX Audio System(s) .................. 3-58 Auto Stop Mode .................. 3-35 Automatic Climate Control System ........................... 3-17 Automatic Door Lock .............. 2-7 Automatic Door Unlock ........... 2-7 Automatic Headlamp System ........................... 3-13 Automatic Transmission Fluid ............................... 5-17 Operation ........................ 2-20 B Battery ............................... 5-27 Electric Power Management .................
INDEX Child Restraints (cont.) Securing a Child Restraint in the Right Front Seat Position ....................... Where to Put the Restraint ...................... Chime Level Adjustment ........ Cleaning Aluminum Wheels ............. Exterior Lamps/Lenses ...... Fabric/Carpet ................... Finish Care ...................... Instrument Panel, Vinyl, and Other Plastic Surfaces ...................... Interior ............................ Leather ........................... Tires .......................
i-4 INDEX Door Automatic Door Lock .......... 2-7 Automatic Door Unlock ........ 2-7 Delayed Locking ................. 2-6 Locks ............................... 2-6 Power Door Locks .............. 2-6 Rear Door Security Locks .... 2-7 Driver Seat Height Adjuster ........... 1-4 Driver Behavior ..................... 4-2 Driver Information Center (DIC) .................... 3-36 DIC Operation and Displays ....................... 3-36 DIC Vehicle Customization ............... 3-49 DIC Warnings and Messages ..
INDEX F Filter Engine Air Cleaner ............ 5-15 Finish Damage .................... 5-73 Fixed Mast Antenna ............. 3-84 Flashers, Hazard Warning ....... 3-5 Flash-to-Pass ........................ 3-7 Flat Tire .............................. 5-58 Fluid Automatic Transmission ..... 5-17 Windshield Washer ........... 5-24 Folding Rear Seat ................. 1-9 Folding Seatback, Passenger ......................... 1-7 Fuel ..................................... 5-5 Additives .........................
i-6 INDEX I Ignition Positions .................. 2-14 Infants and Young Children, Restraints ........................ 1-25 Inflation - Tire Pressure ......... 5-43 Inflator Kit, Tire .................... 5-59 Instrument Panel Brightness ....................... 3-14 Cluster ............................ 3-23 Overview ........................... 3-4 Intermediate Voltage Devices and Wiring ....................... 5-74 J Jump Starting ...................... 5-28 K Keyless Entry System ............
INDEX Lower Anchors and Tethers for Children ...................... 1-31 Lumbar Manual Controls ................. 1-5 M Maintenance Schedule Additional Required Services ........................ 6-5 At Each Fuel Fill ................ 6-8 At Least Once a Month ....... 6-9 At Least Once a Year ......... 6-9 Introduction ....................... 6-1 Maintenance Footnotes ....... 6-7 Maintenance Record ......... 6-14 Maintenance Replacement Parts ........................... 6-12 Maintenance Requirements .......
i-8 INDEX P Paint, Damage ..................... 5-73 Park Shifting Into ..................... 2-23 Shifting Out of .................. 2-25 Park Brake .......................... 2-22 Parking Over Things That Burn ...... 2-25 Passenger Airbag Status Indicator .......................... 3-26 Passenger Sensing System ... 1-49 Passing .............................. 4-11 PASS-Key® III+ Electronic Immobilizer ...................... 2-12 PASS-Key® III+ Electronic Immobilizer Operation ........
INDEX Routing, Engine Drive Belt .... 6-13 Running the Vehicle While Parked ............................ 2-26 S Safety Belt Reminders .......... 3-24 Safety Belts Care of ........................... 5-69 How to Wear Safety Belts Properly ....................... 1-13 Lap-Shoulder Belt ............. 1-17 Safety Belt Extender ......... 1-22 Safety Belt Use During Pregnancy .................... 1-22 Safety Belts Are for Everyone ..................... 1-10 Safety Warnings and Symbols ....
i-10 INDEX Storage Areas (cont.) Cupholders ...................... Driver Storage Compartment ................ Glove Box ....................... Rear Seat Armrest ............ Sunglasses Storage Compartment ................ Storing the Tire Sealant and Compressor Kit ................ Stuck in Sand, Mud, Ice, or Snow .......................... Sun Visors .......................... 2-37 2-38 2-37 2-38 2-37 5-66 4-17 2-10 T Tachometer .........................
INDEX U Uniform Tire Quality Grading .. 5-54 Universal Home Remote System ........................... 2-32 Operation ........................ 2-33 V Vehicle Control ............................. 4-4 Design .............................. 4-2 Loading ........................... 4-18 Running While Parked ....... 2-26 Symbols .............................. iii Vehicle Customization, DIC .... 3-49 Vehicle Data Recording and Privacy ............................ 7-14 Vehicle Identification Number (VIN) ........
i-12 INDEX X XM Radio Messages ............ 3-71 XM™ Satellite Radio Antenna System ........................... 3-84 Y Your Driving, the Road and Your Vehicle ...................... 4-1 Your Vehicle and the Environment ......................
